• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.315-318
• /
• 2007

A dynamic simulation of a turbo-shaft engine was performed for analysis of transient-state and engine-starting characteristics using the MATLAB/SIMULINKTM. The turbo-shaft engine was modelled based on thermodynamic and rotor dynamic relations. The analysis of engine starting characteristics was performed by monitoring the rate of the pressure, temperature and mechanical torque changes along the engine stations by the torque input generated from the accessary power unit and transmitted to the power turbine. The simulation of the transient-state characteristics of the engine was performed under fuel flow rate increase from the steady-state condition. For the future study, engine control unit will be added to the basic turbo-shaft engine model to enhance capability of engine performance simulation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1041-1053
• /
• 1993

A theoretical model to predict the triangular chip formation in cutting with a self-propelled rotary tool is developed. The model is based on the model of transient chip formation in two dimensional orthogonal cutting. The predicted results are found to be in good agreement with the experimental observations and suggest that transient charcteristics of work material, which depend on both cutting conditions and material properties, have the significant influence on triangulation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.349-352
• /
• 2010

A study is analyzed on the transient flow of supersonic diffuser and performed on the of supersonic diffuser with Computational Fluid Dynamic. The flow field of supersonic diffuser is calculated using Axisymmetric two-dimensional Navier-Stokes equation with $k-{\epsilon}$ turbulence model. The transient simulation is compared in terms of mach number and temperature of vacuum chamber according to the chamber pressure of starting transient on Liquid rocket engine.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.22-23
• /
• 2010

본 논문에서는 전동지게차용 납축전지의 충전을 위해 위상천이 풀브리지 컨버터를 이용한 충전기의 설계 및 제작에 관하여 기술한다. 배터리는 저항부하와 달리 큰 커패시턴스 성분을 가지고 있어 컨버터의 리플 전류를 모두 흡수하게 되며, 이로 인해 시스템 효율 및 축전지 수명에 좋지 않은 영향을 끼칠 수 있다. 본 연구에서는 2차측에 Current Doubler를 가진 위상천이 풀브리지 컨버터를 적용함으로써 변압기 전류 및 리플 전류의 크기를 감소시켰다. 또한, 배터리 임피던스를 고려한 제어기 설계 모델을 제시하고 제어기를 설계하여, 실제 배터리를 대상으로 한 정전류 및 정전압 제어를 통해 충전기 시스템의 성능 및 안정성을 검증하였다.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.381-388
• /
• 2003

This paper presents a method of giving weights to garbage class clustering and Filler model to improve performance of keyword spotting system and a time-saving method of dialogue speech processing system for keyword spotting by calculating keyword transition probability through speech analysis of task domain users. The point of the method is grouping phonemes with phonetic similarities, which is effective in sensing similar phoneme groups rather than individual phonemes, and the paper aims to suggest five groups of phonemes obtained from the analysis of speech sentences in use in Korean morphology and in stock-trading speech processing system. Besides, task-subject Filler model weights are added to the phoneme groups, and keyword transition probability included in consecutive speech sentences is calculated and applied to the system in order to save time for system processing. To evaluate performance of the suggested system, corpus of 4,970 sentences was built to be used in task domains and a test was conducted with subjects of five people in their twenties and thirties. As a result, FOM with the weights on proposed five phoneme groups accounts for 85%, which has better performance than seven phoneme groups of Yapanel [1] with 88.5% and a little bit poorer performance than LVCSR with 89.8%. Even in calculation time, FOM reaches 0.70 seconds than 0.72 of seven phoneme groups. Lastly, it is also confirmed in a time-saving test that time is saved by 0.04 to 0.07 seconds when keyword transition probability is applied.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.220-223
• /
• 2004

The initial conditions such as the film thickness and the void fraction at the onset of annular flow are required for the analytical dryout model. The Disturbance Wave Instability model(DWI model) is one of the model describing the Annular-to-Intermittent Flow regime Transition(AIFT). The experimental CHF conditions for the uniformly heated tube were compared with the predictions by the modified Levy model, for which the initial conditions at AIFT were estimated by the DWI model. For the flow through long tubes with small inlet subcooling, the effect of AIFT model on the dryout prediction was little. However, the use of DWI model gave better prediction of CHF in a short tube.

• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.443-444
• /
• 2013

빈발하고 있는 대규모 홍수와 자연재해는 정확도가 높은 하천 흐름 수치해석 모델에 대한 관심의 증대로 이어지고 있다. 현재 하천에서 발생하는 일반적인 흐름은 기존에 개발된 여러 형태의 천수방정식을 지배방정식으로 하는 수치기법에 의해 해석되고 있으나, 연속적이지 않은 형태의 흐름을 해석하거나 매우 정확한 해석을 필요로 하는 경우에는 기존의 수치해석기법은 많은 한계를 보여 주고 있다. 본 연구에서는 불연속 갤러킨 기법 기반의 흐름 모델을 개발하고, 이를 이용하여 천이류로 분류되는, 댐 붕괴파, 둔덕위 흐름과 2차원 사류의 모의에 적용하여 기존의 수치해와 잘 일치함을 확인하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.7
• /
• pp.855-861
• /
• 2007

In real system application, the IMM-based position tracking algorithm requires robust performance, less computing resources and easy design procedure with respect to the uncertain target maneuvering, To solve these problems, an adaptive fuzzy interacting multiple model (AFIMM) algorithm, which is based on the well-defined basis sub-models and well-adjusted mode transition probabilities (MTPs), is proposed. Simulation results show that the proposed algorithm effectively solves the problems in the real system application of the IMM-based position tracking algorithm.

• KIISE Transactions on Computing Practices
• /
• v.21 no.7
• /
• pp.488-493
• /
• 2015

An AddSIM(Adaptive distributed and parallel Simulation environment for Interoperable and reusable Models) is an integrated engagement simulation environment with high-resolution weapon system models for estimation and analysis of their performance and effectiveness. AddSIM can simultaneously handle the continuous dynamical system models based on continuous time, and command, control(C2) and network system models based on a discrete event. To accommodate legacies based on DEVS(Discrete Event System Specification) modeling, DEVS legacies must first be converted into AddSIM models. This paper describes how to implement DEVS models on AddSIM. In this study a method of mapping from hierarchical DEVS models to AddSIM players was developed: The hierarchical DEVS model should be flattened into a one layered model and four DEVS functions of the model, external transition, internal transition, output and time advance, should be mapped into functions of the AddSIM player.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.263-267
• /
• 2011

This paper presents a numerical investigation of the deflagration to detonation transition (DDT) of flame acceleration by a shock wave filled with an ethylene-air mixture in bent tube. A model consisting of the reactive compressible Navier-Stokes equations and the ghost fluid method (GFM) for complex boundary treatment is used. A various intensities of incident shock wave simulations show the generation of hot spots by shock-flame interaction and the accelerated flame propagation due to geometrical effect. Also the first detonation occurs nearly constant chemical heat release rate, 20 MJ/($g{\cdot}s$). Through our simulation's results, we concentrate the complex confinement effects in generating strong shock wave, shock-flame interaction, hot spot and DDT in pipe.