• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.2
• /
• pp.92-99
• /
• 1991

A moored body in the sea is subjected to second-order wave forces as well as to linear oscillatory ones. The second-order farces contain slowly-varying components, of which the characteristic frequency can be as low as the natural frequency of horizontal motions of the moored body. As a consequence, the slowly-varying force can excite unexpectedly large horizontal excursion of the body, which may cause a serious damage on the mooring system. In design analysis of Turret-type mooring system which is one of the interesting mooring systems for a floating body. the slowly-varying drift forces and the transient motion of the system during weathervaning are very important. In this paper the slowly-varying drift forces were calculated by using the Quadratic Transfer Function with considering the second order free-wave contributions. Additionaly the transient surge motion of the moored body was simulated with including the roll of the time-memory effect. In this simulation the spring constant of the spread Turret mooring system is updated at every time step for considering the nonlinear effect.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.33-42
• /
• 1999

In the present study, crack initiation criteria, static failure and tensile mode fatigue behavior for a rail steel are evaluated to assure the railway vehicle's safety. The transverse fissure, which is the most critical damage in the rail, is initiated by the maximum shear stress and its location is subsurface. In addition, the possibility of transition from the shear mode to the mixed mode increases with increasing the length of subsurface crack. Because of the brittleness by the welding, the fracture toughness of the welded part is lower than of the base metal. For low ${\Delta}K$, the stage II fatigue crack growth rates of the welded part is slower than of the base metal but, for high ${\Delta}K$, this different behavior for fatigue crack growth rate is nearly diminished. These trends are more remarkable for low stress ratio, R=0.1. It is believed that this behavior is caused by the change of the microstructure which that of the welded part is coarser than of base metal.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.843-854
• /
• 2009

For preparing Korean lunar missions, optimal Earth-Moon transfer trajectory is designed using continuous low thrust. Using both constant and variable low thrusting method, "End-to-End" mission analysis is made from beginning of the Earth departure to the final lunar arrival. Spacecraft's equations of motion is expressed using N-body dynamics including the gravitational effects due to the Earth, Moon, Sun and also with Earth's $J_2$ effects. Planets' exact locations are computed accurately with JPL's DE405 ephemeris. As a results, optimal thrust steering angle's characteristics are discovered which showed almost tangential direction burns at the near of central planets. Also, it is confirmed that variable low thrusting method is more efficient than constant thrusting method, and can save about 5% of fuel consumption. Presented algorithm and various results will give numerous insights into the future Korea's Lunar missions using low thrust engines. Also, it is expected to be used as a basis of more detailed mission analyzing tool.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.222-229
• /
• 2012

The cooling of a injector effects on the vapor pressure of cryogenic oxidizer spray, and it decides the phase transition point at the ignition process, when the combustion chamber pressure increases drastically. The phase transition of oxidizer spray affects the ignition characteristics, and several ignition tests with the LOx/$GCH_4$ uni-element coaxial swirl injector was performed in the different initial temperatures of oxidizer injector, in order to investigate the effect of injector cooling on the ignition transient characteristics. At the transition point of oxidizer phase, where the combustion chamber pressure increased over the LOx vapor pressure, the temporary quenching phenomenon of the flame occurred. The lower temperature of chilled down injector and tubing tends to move up the phase transition earlier.

• Korean Journal of Environment and Ecology
• /
• v.15 no.1
• /
• pp.39-56
• /
• 2001

본 연구는 국토의 친환경적 개발을 위한 제도적 장치 중 하나인 환경성검토의 강화방안을 마련하고자 경기도 남양주시 오남면 팔현리 일대의 골프장개발예정자를 대상으로 한 환경성검토서를 분석하였으며, 또한 대상지의 정확한 평가를 위해 현존식생도, 녹지자연도, 군집의 발달기원, 천이단계, 군집의 희소성, 식물의 희소성 판단의 6개 항목을 선정, 적용한 결과 본 대상지는 개발계획읜 축소. 조정항목으로 판단되었다. 친환경적인 개발을 위한 환경성검토 강화방안을 계획적인 측면에서는 적정대상지의 선정과 이식수목의 산정을 제도적인 측면에서 표토보존 및 이용에 관한 법률과 자연훼손보상제도를 제안하였다. 추가조상대상지역(면적: 1.436, DGN 7이 254, 587$\m^2$. DGN7(8)이 207,235$\m^2$ DGN 5가 163,259$\m^2$, DGN 2는 184,129$\m^2$로 나타나 대상지와 추가조사지역 일부를 포함한 적정대상지를 선정하였다. 이식수종은 성상별로 소나무 1종, 낙엽활엽교목 19종, 낙엽활엽아교목 11종, 낙엽관목 30종, 만경목 11종이었고, 이식가능면적은 639,310$\m^2$이었으나, 보존지역을 제외한 실제 이식가능한 지역은 275, 366$\m^2$으로 나타났다. 대상지의 내 이용가능한 표토량은 137.681㎥이었으며, 보존지역 중 불가피한 훼손면적은 43,938$\m^2$로 나타나 이에 상응하는 가치의 습지나 소생물권 등을 조성하여야 할 것이다.

• Korean Journal of Plant Resources
• /
• v.17 no.3
• /
• pp.248-256
• /
• 2004

Dendropanax morbifera Lev.(Araliaceae), Korean endemic and evergreen small tree is a component of evergreen forest and mainly distributed in sourthern region and islands in Korea. The ecological characteristics of 4 natural stands of D. morbifera.(Sundol, Suak, Hannam, and Sangho populations in Cheju island) were studied. In most of the D. morbifera natural stands, the following tree species appeared predominantly: Castanopsis cuspidata var. sieboldii, Carpinus laxiflora, D. morbifera, Quercus glauca, Quercus myrsinaefolia, Camellia japonica, and Acer pseudo-sieboldianum. Two tree species, such as C. cuspidata var. sieboldii and C. laxiflora appeared in the all investigated stands. D. morbifera occupied 17.2% of the upper story, 12.9% of the middle story, and 10.3% of the lower story, respectively. The distribution patterns by Morisita' s Index showed that D. morbifera was distributed randomly in the three stories. The frequency distribution of DBH D. morbifera species showed reverse J-shaped, therefore it seems to remain as a dominant species.

• Korean Journal of Ecology and Environment
• /
• v.43 no.1
• /
• pp.117-128
• /
• 2010

The water qualities of Namdae-stream, Yeongok-stream and Sacheon-stream were examined, by using physicochemical factors, trophic status and epilithic diatoms from May 2008 to February 2009. The physicochemical water qualities of three streams were, except for some construction areas and sites of downstream, generally good, having less concentration than BOD of $2\;mg\;L^{-1}$. As for the sites of downstream, there were ongoing pollution such as graduation of nutrients in Namdae-stream and Sacheon-stream, due to salinity of seawater and topographical feature of the closed estuary. The examination of trophic status of Namdae-stream showed mesotrophic status in all the sites. Also, eutrophication was in progress as from the upstream to the downstream of Yeongok-stream, and Sacheon-stream showed eutrophic status in all its sites. As a result of the biological water quality assessment, Namdae-stream, excluding the downstream site, came out to be $\beta\sim\alpha$-oligosaprobic, and biological water quality was good, having TDI less than 50. Some construction sites and downstream site of Namdae-stream are $\beta$-mesosaprobic, and with the TDI over 70, the biological water quality assessment came out to be polluted. Yeongok-stream is $\beta\sim\alpha$-oligosaprobic, and its biological water quality is good, having TDI less than 40. Sacheon-stream, excluding the upstream site on May 2008 and February 2009, is $\beta\sim\alpha$-mesosaprobic, and its TDI over 70 shows that it has been polluted. The correlation analysis showed a high correlation in both DAlpo and TDI. Also, biological assessment of water quality (DAIpo, TDI) showed higher correlation with TSI rather than BOD.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.4
• /
• pp.357-367
• /
• 2008

Preparing for future Korean Lunar missions, preliminary Lunar mission design software is developed using a impulsive thrusting method. Developed software is capable of design and analysis every required mission phases to design Lunar mission, including the Earth departure, Lunar transfer, Lunar arrival and mission operation phases. Also, assuming that KSLV-II is selected as a launch vehicle, future Korean Lunar explorer's mass budget is estimated based on driven optimal trajectory characteristics. Tracking analysis is also performed using Deep Space Network including angle geometry analysis between Earth - Moon - Lunar explorer - Sun which are very important for communication, solar panel pointing strategy and eclipse analysis when Lunar missions are under designing phase.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.24-24
• /
• 2010

Chalcopyrite $Cu(In,Ga)Se_2$ (CIGS) 화합물 반도체는 고효율 박막태양전지의 광 흡수층으로 사용되는 물질 중 가장 우수한 효율 (19.9%, NREL 2008)을 보유하고 있다. CIGS는 직접천이형 에너지밴드갭 (direct bandgap)을 가지고 있고, 광흡수계수가 $1{\times}10^5\;cm^{-1}$로서 반도체 중 서 가장 흡수율이 높은 재료에 속하여 두께 $1{\sim}2\;{\mu}m$의 박막으로도 고효율의 태양전지 제조가 가능하고, 또한 장기적으로 전기광학적 안정성이 매우 우수한 특성을 지니고 있다. 현재 고효율 CIGS 셀생성을 위해 널리 사용되고 있는 CIGS 흡수층 성장공정은 "co-evaporation(동시증발법)"과 2-step 공정이라 불리는 "sputter-selenization(스퍼터-셀렌화)" 방법이다. 동시증발법은 개별원소 Cu, In, Ga, Se 들을 고진공 분위기에서 고온 ($550{\sim}600^{\circ}C$)기판위에 증착하는 방법으로 소면적에서 가장 좋은 효율(~20%)을 보이는 공정이다. 하지만, 고온, 고진공 공정조건과 대면적 증착시 온도 및 조성 불균일 등의 문제점 등으로 상용화에 어려움이 있다. 스퍼터-셀렌화 공정은 1단계에서 스퍼터링 방식으로 CuGaIn 전구체를 증착하고, 2단계에서 고온($550{\sim}600^{\circ}C$)하에 $H_2Se$ 혹은 Se vapor와 반응시켜 CIGS를 생성한다. 일본의 Showa Shell와 Honda Soltec 등에 의해 이미 상업화 되었듯이, 저비용 대면적으로 상업화 가능성이 높은 공정으로 평가되고 있다. 하지만, 2단계에서 사용되는 $H_2Se$ 및 Se vapor의 유독성, 기상 Se과 금속전구체 간의 느린 셀렌화 반응속도, 셀렌화반응 후 생성된 CIGS 박막 두께방향으로의 Ga 불균일분포, 생성된 CIGS/Mo 계면 접착력 저하등의 문제점들이 해결되어야만 상업화에 성공할 수 있을 것이다. 본 Tutorial에서는 CIGS 물질의 열역학 상평형과 반응메카니즘에 대해 설명하고, 다양한 생성 공정들을 소개할 것이다.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.53-59
• /
• 2003

The present study was conducted to analyze the vegetational difference in fellowed fields at the different seral stages. Plant species were surveyed on the fields having different cropping history, soil moisture conditions, and the duration of set-aside. Effects of soil moisture condition and fellowing duration on the vegetational profiles of fellowed fields in the course of different seral stages. In the fields fellowed for more than three years, a conspicuous feature of vegetation was the dominance of perennial species, which was less dominant in the fields fellowed for less than 3 years. The floristic composition of fellowed fields was dependent on the soil moisture condition. However, the influence of fallow-history on vegetational composition was less than that of the soil moisture conditions. The dominant species occurred in fellowed upland (dry) fields were changed from Glycine soja, Persicaria thunbergiana, and Artemisia princeps at 2-year-fellowed to Persicaria thunbergiana, Miscanthus sinensis, and Glycine soja at 6-year-fellowed. In wet fellowed paddy fields, annual Mosla punctulata, Ambrosia artemisiifolia, and Setaria viridis, the dominant species at 3-year-fellowed, were substituted by perennial Miscanthus sinensis, Aster pilosus, and Hemarthria sibirica at 7-year-fellowed. When the succession continued for 11 years in wet fields, the vegetation was characterized by the domination of perennials such as Phragmites communis, Zizania latifolia, and Typha orientalis. It was suggested that the soil moisture condition was a strong determinant of the dominant species on early seral conditions. In the fellowed paddy fields, the species diversity was relatively higher in the fields set-asided as wet condition compared to the fields fellowed as dry condition.