여러가지 Zr합금에 대한 부식시험을 autoclave를 이용하여 물과 여러가지 Li 용액에서 수행하였다. 합금은 11종의 신합금을 사용하였는데 크게 나누어 Zircaly형 합금(ZrSnFeCr), ZnNbFeCr, ZrSnNbFeCr과 ZrFeCr 합금으로 대별되며, 비교평가를 위해 표준 Zircaloy-4 합금에 대해서도 부식시험을 수행하였다.모든 합금에서 Li을 일정농도이상 첨가할 때 부식은 가속되는데, 부식은 Li의 농도가 2.2와 30ppm 사이일 때 가속되기 시작한다. Li은 부식거동에 있어서 천이후 영역에서의 부식속도보다는 천이시간과 무게 증가량에 더 영향을 끼치는 것으로 나타났다. 수소 흡수율은 Li 농도와 합금에 따라서 강하게 영향을 받는것으로 나타났으며, Li 농도가 30ppm이상에서는 Li 가속부식과 함께 Li가속 수소흡수현상이 나타났다. ZrSnFeCr합금들은 낮은 부식속도와 늦은 천이현상을 보이며 표준 Zircaloy보다 훨씬 우수한 부식저항성을 보인 반면에 대부분의 Nb첨가 합금은 높은 부식속도와 빠른 천이 현상을 보였다.
Proceedings of the Korean Nuclear Society Conference
/
1996.05c
/
pp.341-346
/
1996
사용후핵연료에 대한 장기건식저장과 관련하여 원자로에서 조사된 사용후 핵연료피복관에 대한 산화시험을 공기분위기에서 수행하였다. 피복관 시료의 50$0^{\circ}C$ 공기중 산화시험 결과 산화 초기에 급격한 산화율을 보였으며, 이 후 천이점까지 느리게 산화가 진행되다가 천이 후에는 선형적으로 급격히 무게가 증가하는 지르코늄 합금의 수증기 및 공기중에서의 전형적인 산화양상을 나타내었다. 시편별로는 가장 두꺼운 노내 산화막을 가진 시편이 가장 높은 산화율을 나타내었으며, 노내 산화시 천이점에 근접한 시편들이 가장 낮은 산화율을 보였다. 산화율이 가장 높은 시편의 천이후 영역에서의 산화율은 $\Delta$W = 0.74 t + 38.61과 같은 관계식으로 표현될 수 있었다. 이 때 $\Delta$W는 무게이득(mg/dm$^2$)이고 t는 산화시간(h)을 나타낸다. 시험에 사용된 피복관의 단위 산화막두께(l$\mu$m)에 대한 산화무게증가량은 약 13.4mg/dm$^2$으로 나타났다. 이러한 결과들은 사용후핵연료 중간저장 시설 및 저장캐스크의 설계 전산코드 작성 및 저장시설의 운영에 관련되어 기반자료로 활용될 수 있을 것이다.
Proceedings of the Korean Nuclear Society Conference
/
1995.05b
/
pp.623-628
/
1995
여러 가지 Zr합금에 대한 부식시험을 autoclave를 이용하여 물과 여러 가지 Li 용액에서 수행하였다. 합금은 11종의 신합금을 사용하였는데 크게 나누어 Zircaloy형 합금(ZrSnFeCr), ZrNbFeCr, ZrSnNbFeCr과 ZrFeCr 합금으로 대별되며, 비교평가를 위해 표준 Zircaloy-4 합금에 대해서도 부식시험을 수행하였다. 모든 합금에서 Li을 일정농도이상 첨가할 때 부식은 가속되는데, 부식은 Li의 농도가 2.2와 30 ppm 사이일 때 가속되기 시작한다. Li은 부식거동에 있어서 천이후 영역에서의 부식속도 보다는 천이시간과 무게 증가량에 더 영향을 끼치는 것으로 나타났다. 수소흡수율은 Li 농도와 합금에 따라서 강하게 영향을 받는 것으로 나타났으며, Li 농도가 30 ppm 이상에서는 Li 가속부식과 함께 Li가속 수소흡수현상이 나타났다. ZrSnFeCr합금들은 낮은 부식속도와 늦은 천이현상을 보이며 표준 Zircaloy보다 훨씬 우수한 부식저항성을 보인 반면에, 대부분의 Nb첨가 합금은 높은 부식속도와 빠른 천이 현상을 보였다.
Proceedings of the Korea Water Resources Association Conference
/
1998.05a
/
pp.395-403
/
1998
오염원의 이송확산에 관한 많은 연구들이 수행되어 왔으나 특히 비포화 영역에서 오염원 이송확산을 측정하는 것은 매우 어려운 것으로 알려지고 있다. 비포화 토양에서의 오염원 이송확산은 매질의 함수량 변화에 영향을 받기 때문에 오염원 거동특성을 이해하려면 비포화 흐름 분석을 선행한 후 오염원의 이송확산 특성을 분석하여야 한다. 본 연구에서는 비포화 영역에서의 오염원 이송특성을 분석하기 위하여 TDR(Time Domain Reflectometry)을 이용하여 비포화 흐름 및 오염원 이송을 측정하였다. 이를 위하여 본 연구에서는 TDR을 이용하여 오염원 이송을 측정하는 방법을 개발하였으며, 이 방법을 이용하여 1차원의 토양기둥시료에서 비포화 흐름 및 오염원 이송확산에 관한 실험을 수행하고 수치모형을 적용함으로써 비포화 영역에서 오염원의 이송확산에 관한 거동특성을 규명하였다. 본 연구에서는 두 종류의 국내 토양시료(SUS, KUS)를 사용하였는데, 토양의 물리적 특성을 예비실험을 통하여 규명한 후 토양기둥시료를 이용한 본실험을 수행하였다. 비포화 천이흐름하의 오염원 이송확산 실험에서는 급격한 습윤전선의 전진에 따른 종형의 함수량변화를 관측할 수 있었고, 이때 오염원의 농도는 함수량의 천이구간의 중심점으로부터 전방영역의 농도분포가 습윤전선에서의 함수량 분포와 유사한 종형을 이루고 있음을 관측할 수 있었다. 비포화 정상흐름하의 오염원 이송확산 실험에서는 오염원이 이송하며 농도 천이구간이 확장되어지는 전형적인 형태를 보였다. 또한 예비실험에서 측정한 매개변수를 입력자료로하여 수행한 수치결과와 실험결과를 비교하였는데 비포화 흐름특성은 실험결과와 수치결과가 정량적으로 일치하는 경향을 보였으나, 오염원 이송확산 특성은 정량적으로 수치결과가 실험결과보다 더 많이 확산되는 경향을 보였다. 따라서 수치모형을 현장에 적용할 경우 확산지수 결정에 주의하여야 할 것으로 판단된다. 즉, 수치모형에 적용할 확산지수는 BTC 실험을 통하여 측정한 확산지수, 수치확산, 흡착계수, 적용영역의 크기 등을 고려하여 결정하여야 한다. 특히 본 논문에서는 TDR을 이용하여 최초로 천이상태의 함수량과 오염원 농도를 측정하였는데 이를 위하여 전기전도도와 함수량관계를 추정하는 식을 제안하였으며, 전기전도도와 토양수 농도, 전기전도도와 함수량의 관계를 이용한 천이상태의 오염원 농도 측정방법을 개발하였다. 특히 제안식에서는 한계함수량의 개념을 도입하여 전기전도도와 함수량관계를 추정하므로 추정식의 실험값 반영 정도를 증가시켰다. 본 연구에서 제안된 식을 이용하여 추정된 전기전도도와 함수량관계는 다른 제안식에 비하여 개선된 결과를 보여 주었고, 본 연구에서 개발한 오염원 농도 측정법을 이용하여 측정한 결과 함수량이 0.15이하에서는 측정오차가 크지만 함수량이 0.15이상일 경우 매우 좋은 결과를 보였는데 질량평형을 검토한 결과 약 5-10%의 오차율을 보였다. 따라서 본 논문에서 개발된 천이상태의 오염원 농도측정법은 용존 오염물질의 이송에 관한 정확한 실험을 제공할 것으로 판단된다.
Journal of the Computational Structural Engineering Institute of Korea
/
v.18
no.1
/
pp.13-20
/
2005
Since High Tensile Steel has been widely used to thin plate on the steel structure and marine structure, It has increased possibility of buckling. Especially, initial deflection of ship structure is mainly caused by heat processing of welding or cutting etc. This initial deflection has negative effect to thin plate, which would incur a complicated nonlinear behavior accompanied with secondary buckling. If idealized initial deflection is considered in early marine structure design of secondary buckling, accuracy and reliability will be improved considerably. The measurement data of initial deflection from experiment is applied to finite element series analysis. For FEA(ANSYS), Applied nonlinear buckling analysis is used by Newton-Raphson method & Arc-length method included in this program.
The High-tensile steel has been recognized as a promising concept for structural design of light weight transportation systems such as aircraft high speed trains and fast ships. Using the high-tensile steel has been widely used in ship structures, and this enables to reduce the plate thickness. Using the high-tensile steel effectively for a ship hull, the plate thickness becomes thin so that plate buckling may take place. Therefore, precise assessment of the behavior of plate above primary buckling load is important. In this study, examined closely secondary buckling behavior after initial buckling of thin plate structure which operated compressive load according to the various kinds of yield stress with simply supported boundary condition. Analysis method is F.E.M by commercial program(ANSYS V7.1) and complicated nonlinear behaviour can analyze using art-length method about secondary buckling.
Park, Jae-Young;Kim, Woo-Gon;Ekaputra, I.M.W.;Kim, Seon-Jin;Kim, Eung-Seon
Transactions of the Korean Society of Mechanical Engineers A
/
v.39
no.12
/
pp.1257-1263
/
2015
A correlation between the transient regime and steady state regime on the creep crack growth (CCG) for Grade 91 steel, which is used as the structural material for the Gen-IV reactor systems, was investigated. A series of CCG tests were performed using 1/2" CT specimens under a constant applied load and at a constant temperature of $600^{\circ}C$. The CCG rates for the transient and steady state regimes were obtained in terms of $C^*$ parameter. The transient CCG rate had a close correlation with the steady-state CCG rate, as the slope of the transient CCG data was very similar to that of the steady state data. The transient rate was slower by 5.6 times as compared to the steady state rate. It can be inferred that the steady state CCG rate, which is required for long-time tests, can be predicted from the transient CCG rate obtained from short-time tests.
The corrosion characteristics of zirconium alloys have been investigated in various aqueous solutions of LiOH. NaOH, KOH, RbOH. and CsOH at 3S$0^{\circ}C$. The concentrations of solutions were set to 4.3 mmol and 32.Smmol with equimolar $M^+$ and OH . The oxide characterization was performed using TEM on the samples corroded in 32. Smmol LiOH, NaOH, and KOH solution. The samples were prepared to have the same oxide thickness for the pretransition and post- transition regimes. Considering the trend of experimental data, the cation would playa major role in the corrosion process of Zr alloys in alkali hydroxide solutions. The microstructures of the oxides formed in various solutions were quite different. In LiOH solution the oxides grown in pre-transition as well as post-transition had the equiaxed structures with many pores and open grain boundaries. The oxides grown in NaOH solution had the protective columnar structures in pre-transition and the equiaxed structures with many open grain boundaries in post- transition. On the other hand. in KOH solution the columnar structure was maintained from pre- transition to post- transition. It was considered that the cation incorporation into zirconium oxide controlled the oxide characteristics and the corrosion acceleration in alkali hydroxide solutions.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.