Browse > Article
http://dx.doi.org/10.3795/KSME-A.2015.39.12.1257

Correlation Between Transient Regime and Steady-State Regime on Creep Crack Growth Behavior of Grade 91 Steel  

Park, Jae-Young (Dept. of Mechanical Engineering, Pukyong Nat'l Univ.)
Kim, Woo-Gon (Korea Atomic Energy Research Institute)
Ekaputra, I.M.W. (Dept. of Mechanical Engineering, Pukyong Nat'l Univ.)
Kim, Seon-Jin (Dept. of Mechanical Engineering, Pukyong Nat'l Univ.)
Kim, Eung-Seon (Korea Atomic Energy Research Institute)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.39, no.12, 2015 , pp. 1257-1263 More about this Journal
Abstract
A correlation between the transient regime and steady state regime on the creep crack growth (CCG) for Grade 91 steel, which is used as the structural material for the Gen-IV reactor systems, was investigated. A series of CCG tests were performed using 1/2" CT specimens under a constant applied load and at a constant temperature of $600^{\circ}C$. The CCG rates for the transient and steady state regimes were obtained in terms of $C^*$ parameter. The transient CCG rate had a close correlation with the steady-state CCG rate, as the slope of the transient CCG data was very similar to that of the steady state data. The transient rate was slower by 5.6 times as compared to the steady state rate. It can be inferred that the steady state CCG rate, which is required for long-time tests, can be predicted from the transient CCG rate obtained from short-time tests.
Keywords
Grade 91 Steel; Creep Crack Growth Rate; Transient Time; $C^*$-Parameter;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Orr, J. and Burton, D., 1994, "Improving the Elevated Temperature Strength of Steel 91 (9%CrMoNbVN)," Materials for Advanced Power Engineering, Vol. 1, pp. 263-280.
2 Cadek, J., Sustek, V. and Pahutova, M., 1997, "An Analysis of Set of Creep Data for a 9Cr-1Mo-0.2V (P91 type) Steel," Material Science and Engineering A, Vol. 225, pp. 22-28.   DOI
3 Kim, W. G., Kim, S. H. and Ryu, W. S., 2001, "Creep Characterization of Type 316LN and HT-9 Stainless Steels by the K-R Creep Damage Model," KSME International Journal, Vol. 15, No. 11, pp. 1463-1471.   DOI
4 Anderson, T. L., 1995, Fracture Mechanics, 2nd ed., CRC Press, Boca Raton, Ann Arbor, London, Tokyo, pp. 226-228.
5 Nikbin, K. M., Smith, D. J. and Webster, G. A., 1986, "An Engineering Approach to the Prediction of Creep Crack Growth," Trans. of the ASME, Vol. 108, pp. 186-191.
6 Saxena, A., 1997, Nonlinear Fracture Mechanics for Engineers, CRC Press, NY, pp. 363-377.
7 Kim, W. G., Kim, H. H., Yoon, K. B. and Ryu, W. S., 2005, "Application of Creep Ductility Model for Evaluating Creep Crack Growth Rate of Type 316SS Series," Material Science Forum, Vol. 475-479, pp. 1433-1436.   DOI
8 Kim, W. G., Yoon, S. N., Ryu, W. S., Kim, S. J. and Yi, W., 2006, "Probabilistic Analysis of the Creep Crack Growth Rate of Type 316LN Stainless Steel by the Monte Carlo Simulation," Journal of ASTM International, Vol. 35, STP 1480, pp. 71-80.
9 Kim, W. G., Yin, S. N., Ryu, W. S. and Chang, J. H., 2006, "Creep Properties of Hastelloy-X Alloy for the High Temperature Gas-Cooled Reactor," Key Engineering Material, Vol. 326-328, pp. 1105-1108.   DOI
10 Kim, W. G., Kim, S. H. and Ryu, W. S., 2002, "Evaluation of Monkman-Grant Parameters for Type 316LN and Modified 9Cr-Mo Stainless Steels," KSME International Journal, Vol. 16, No. 11, pp. 1420-1427.   DOI
11 2007, "Standard Test Method for Measurement of Creep Crack Growth Rates in Metals," ASTM E1457-07.
12 Johnson, H. H., 1965, "Calibrating the Electrical Potential Method for Studying Slow Crack Growth," Material Research and Standard, Vol. 5, No. 9, pp. 442-445.
13 Ryu, W. S., Kim, W. G. and Lee, K. Y., 2003, "Evaluation of Creep Crack Growth Behavior of Type 316LN Stainless Steel," SMiRT-17, Paper No. F05-4.
14 A. Saxena, D. E. Hall and D. L. McDowell, 1999, "Assessment of Deflection Rate Partitioning for Analyzing Creep Crack Growth Data," Engineering Fracture Mechanics, Vol. 62, Issue 1, pp. 111-122.   DOI
15 A. Saxena., 1993, "Fracture Mechanics Approached for Characterizing Creep-Fatigue Crack Growth," JSME international, Series A, Vol. 36, No.1 , pp.1-20.   DOI
16 Webster, G.A. and Ainsworth, R.A., 1994, High Temperature Component Life Assessment, Chapman & Hall, London. pp. 132-162.