• 한국추진공학회지
• /
• 제12권4호
• /
• pp.56-62
• /
• 2008

가스터빈에 적용되는 천음속 원심압축기에 대한 공력설계 및 수치해석을 수행하였다. 평균유선법과 준삼차원 해석을 기반으로 공력설계를 수행하고, 레이놀즈 평균 나비어-스톡스 해석을 통해 압축기 내부 유동장을 해석하였다. 천음속 압축기에서 정압계수, 스월 파라미터 및 블레이드 공력하중 등 주요 공력파라미터들에 대한 분석과 임펠러와 디퓨저 내부 유동장에 대한 고찰이 이루어졌다.

• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.152-160
• /
• 2008

In the present paper, a transonic mixed-flow compressor that has relatively lower frontal area than that of centrifugal compressors is discussed, and aerodynamic design as well as performance prediction are performed. Main design constraints are compressor exit Mach number of 0.3 and flow angle of 30degrees at the design point, and maximum overall compressor diameter of 177mm, that is 7.0inch. The mass flow rate of design point and pressure ratio are 1.05kg/s and 5.2:1, respectively. The aerodynamic design results show that the transonic compressor designed with forward-swept inducer and curved diffuser can have the target performance with efficiency of 75% within the given constraints. And the compressor exit flow characteristics are discussed here.

• 대한기계학회논문집B
• /
• 제41권1호
• /
• pp.9-19
• /
• 2017

본 연구에서는 단단 천음속 축류압축기 정익부 슈라우드에 공기분사기를 설치하는 방안을 제시하고 이 것이 공력성능에 미치는 영향을 분석하기 위해 매개변수 연구를 수행하였다. 분사기의 곡률, 폭, 정익 앞전으로부터의 거리, 원주방향 각도 및 공기분사 비율을 변수로 선정하였고, 각 변수의 변화에 따른 공력성능 영향을 분석하기 위해 삼차원 레이놀즈평균 나비어-스톡스 방정식을 사용한 공력해석을 수행하였다. 매개변수 연구 결과, 정익 분사가 적용된 단단 축류압축기의 공력성능이 향상되었고, 공력성능이 공기분사 비율에 민감한 영향을 받는 것이 확인되었다. 원주방향 각도의 비율이 10%일 때 전압력비와 단열 효율이 가장 크게 향상되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.74.2-74.2
• /
• 2005

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.181-189
• /
• 1998

A numerical study based on the three-dimensional Reynolds averaged Navier-Stokes equations is presented to analyze the transonic flowfield through two-stage axial compressor. Explicit four-step Runge-Kutta scheme is used for solution algorithm, and local time step and implicit residual averaging are introduced for enhancing the convergency. Artificial dissipation model is adopted to assure the stability of solution. The solver is coupled with Baldwin-Lomax model to describe turbulence. To avoid calculating the unsteady flow, a mixing process is modeled at a station between rotating and stationary blade rows. Results show a variety of important physical phenomena. Comparison of the flowfields with and without tip clearance shows that the effect is considerable in this flowfield. Comparisons with experimental data carried out to validate the calculational results show reasonable agreements. Some remedies are also suggested to improve the revealed problems.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1384-1391
• /
• 2001

Three-dimensional flow analysis is implemented to investigate the flow through transonic axial-flow compressor rotor(NASA R67) and to evaluate the performances of Abid's low-Reynolds-number k-$\omega$ and Baldwin-Lomax turbulence models. A finite volume method is used fur spatial discretization. The equations are solved implicitly in time by the use of approximate factorization. The upwind difference scheme is used for inviscid terms and viscous terms are approximated with central difference. The flux-difference-splitting method of Roe is used to obtain fluxes at the cell faces. Numerical analysis is performed near peak efficiency and near stall. The results are compared with the experimental data for NASA R67 rotor. Blade-to-Blade Mach number distributions are compared to confirm the accuracy of the code. From the results, it is concluded that Abid'k-$\omega$ model is better for the calculation of flow rate and efficiency than Baldwin-Lomax model. But, the predictions for Mach number and shock structure are almost the same.

• 한국추진공학회지
• /
• 제5권2호
• /
• pp.8-15
• /
• 2001

터보기계의 효율 향상을 위한 끊임없는 노력에서 익형 형상 설계는 대단히 중요한 부분을 차지하고 있다. 이와 관련하여 천음속 풍동에서 층류 및 난류 경계층 거동(충격파-경계층 상호작용)에 대한 실험적 연구가 CTA 열전대 측정을 통해 이루어졌다. 압축기 익형에 부착된 열전대 실험 결과는 유동의 복잡성에 기인하는 신호의 불명확성 때문에 해석이 대단히 어려운 점이 있으므로 설계자에게 열전대 신호 특성에 대한 정확한 정보를 주기 위해서 다른 측정장치 결과와 비교 분석을 통한 해석기법 이 개발되었다.

• 한국유체기계학회 논문집
• /
• 제9권3호
• /
• pp.7-13
• /
• 2006

Shape optimization of a rotor blade in a single-stage transonic axial compressor has been performed using a response surface method and three-dimensional Navier-Stokes analysis. Two shape variables of the rotor blade, which are used to define a blade skew, are introduced to increase an adiabatic efficiency. Throughout the shape optimization of a rotor blade, the adiabatic efficiency is increased to about 2.2 percent compared to that of the reference shape of the stator. The increase in efficiency for the optimal shape of the rotor is due to the pressure enhancement, which is mainly caused by moving the separation position on the suction surface of rotor blade to the downstream direction.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.228-231
• /
• 2008

Flow fields of a transonic centrifugal compressor are calculated using the commercial CFD code, CFX-TASCflow. Due to the transonic inlet condition, interactions between the shock wave and boundary layers and between the shock wave and tip leakage vortices generate complex flow structures and extra losses. The calculated results show that strong secondary flows due to high curvature and high rotational speed of the impeller. And streamlines near suction surface show that strong radially upward flow develops after the shock between the leading edge locations of main blade and splitter.

• 대한기계학회논문집B
• /
• 제32권4호
• /
• pp.317-326
• /
• 2008

The main purpose of the present study is to perform shape optimizations of transonic compressor blade in order to enhance its performance. In this study, the Latin hypercube sampling of design of experiments and the weighted average surrogate model with the help of a gradient based optimization algorithm are used within design space by the lower and upper limits of each design variable and for finding optimum designs, respectively. 3-D Reynolds-averaged Navier-Stokes solver is used to evaluate the objective functions of adiabatic efficiency and pressure ratio. Six variables from lean and airfoil thickness profile are selected as design variables. The results show that the adiabatic efficiency is enhanced by 1.43% by efficiency optimization while the pressure ratio is increased very small, and pressure ratio is increased by 0.24% by pressure ratio optimization.