• KOREAN POULTRY JOURNAL
• /
• v.49 no.1
• /
• pp.127-129
• /
• 2017

'송강약돌'이라는 새로운 천연 무기 광물질을 10년 넘게 끊임없이 연구 개발한 (주)다비스톤을 찾았다. 지난해부터는 양계산업에도 접목하기 위해 '광물질 사료첨가제 급여가 산란계의 생산성에 미치는 영향'에 대한 논문을 발표하면서 산란율과 난각 강화에 탁월한 효과를 입증한 (주)다비스톤 김상은 대표를 만나 제품에 대해 들어보았다.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.56-61
• /
• 2016

In this study, the effect of natural minerals on the reaction kinetics for lignite-$CO_2$ gasification was investigated. After physical mixing of lignite from Meng Tai area with 5 wt% of each natural mineral catalysts among Dolomite, Silica sand, Olivine and Kaolin, $CO_2$ gasification was performed using TGA at each 800, $850^{\circ}C$ and $900^{\circ}C$. The experimental data was analyzed with volumetric reaction model (VRM), shrinking core model (SCM) and modified volumetric reaction model (MVRM). MVRM was the most suitable among three models. As increasing the reaction temperature, the reaction rate constant became higher. With natural mineral catalysts, the reaction rate constant was higher and activation energy was lower than that of without catalysts. The lowest activation energy, 114.90 kJ/mol was obtained with silica sand. The highest reaction rate constant at $850^{\circ}C$ and $900^{\circ}C$ and lower reaction rate constant at $800^{\circ}C$ were obtained with Kaolin. Conclusively, the better catalytic performance could be observed with Kaolin than that of using other catalysts when the reaction temperature increased.

• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.213-217
• /
• 2020

An eco-friendly water purifier was developed using natural minerals, plants, and sludge from water purification plants. A wastewater complex treatment system using this water purification agent was developed. The wastewater complex treatment system goes through the process of inflow of contaminated water, input of water purification agent, operation of a pressurized flotation device, sludge flotation, sludge collection and treatment water discharge. This device was applied to the removal of green algae in livestock desorption liquid, broiler washing water, factory wastewater, sewage treatment plant and pond to obtain excellent removal rate. The use of natural water purification agents for organic waste purification has not been investigated.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.600-611
• /
• 2019

Yellow to reddish brown soil is generally referred to as hwangto and is used in various industries in Korea. Despite the fact that it is used as an inorganic pigment in dancheong, limited studies have been conducted on the properties of pigments associated with soil and on the mineralogical characteristics of hwangto. This study examines how the pedological and mineralogical features of hwangto affect pigment properties. Results indicate that reddish and yellowish soils have differences in terms of soil texture, mineral composition, oil absorption and stability under light. Reddish soil is mostly found in clay regions, whereas Ulleungdo hwangto is found in loam regions. Yellowish soil is mostly present in the clay loam to loam zones. whereas Haenam hwangto exists in the sandy clay loam zone. As a result of a mineralogical analysis, reddish soil is classified into the feldspar group and clay soil. The major minerals in the yellowish soils are similar however these soils differ in terms of clay mineral compositions. results of the characteristics of pigments prepared by the traditional method revealed that the average particle size is in the range of 10-20 ㎛, reddish soil has an average of 20 ml/100 g higher oil absorption than yellowish soil. In addition, reddish soil is more susceptible to discoloration and deterioration under light than yellowish soil. This study confirms that the soil and mineral characteristics of hwangto affect the physical properties and stability of produced pigments. These result can be used as basic data in future studies natural inorganic pigments using hwangto.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.97-102
• /
• 2007

NMR experiments with various pulse repetition delay time were carried out for the $^{15}N\;and\;^{13}C$ of a natural gem diamond and synthetic diamonds. The natural gem diamond had a weak $^{13}C$ peak at 34.1ppm when 30 second pulse repetition delay time was applied. Similar but more prominent $^{13}C$ peaks were observed at 34.2 ppm with 0.5 second pulse repetition delay time and at 34.7 ppm with 50 second pulse repetition delay time for the synthetic diamonds. Any meaningful $^{15}N$ peak was not observed for either natural or synthetic diamonds due to extremely low content of the $^{15}N$. Significant relationship was observed between relative spin-lattice relaxation times we estimated and the content of impurities. however, it was not possible to distinguish natural diamond from synthetic diamonds due to very similar characteristics of their $^{13}C$ NMR signals except relative spin-lattice relaxation times.

• Journal of Forest and Environmental Science
• /
• v.17 no.1
• /
• pp.1-17
• /
• 2001

Forming a part of "Cooperative Practical Study for the Modernization of the Management of National Forest", this study was conducted to provide overall ecological information for the natural regeneration of major tree species on the basis of community structural attributes in the deciduous forest ecosystem. Followings are summarized characteristics of the natural regeneration for the selected tree species. Betula costata : Although large number of seeds are dispersed by wind, they require mineral soils to germinate. Thick litter layer could be an obstacle to germinate. After germination, the seedling requires large amount of light for successful establishment. Acer mono : Characterized by high shade tolerance and weak drought resistance, the seedling should be overcasted with more than 50% of canopy coverage. High stand density should be maintained to produce good quality of timber. The potential of coppice may be high. Ulmus laciniata : Since this species needs high rate of troll moisture and light, around 60% of canopy coverage should be maintained to retain moisture and incoming light. The competition with other vegetation should be removed for the favor of successful seedling establishment. Fraxinus mandshurica : This species requires moist mineral soils to germinate. After germination, the seedling needs large amount of light and moisture for successful establishment. Site preparation should be applied to reduce competition with weedy vegetation. Fraxinus rhynchophylla : Interval of large seed crops may be highly varied. Thick litter layer could be an obstacle to germinate. Site preparation should be applied to reduce competition with weedy vegetation so as to achieve successful seedling establishment. Quercus mongolica : Including the difficulty of seed supply by the consumption, thick litter layer and mountain bamboo cover could be the obstacle to germinate. More than 50% of relative light intensity is necessary to achieve successful seedling establishment. Kalopanax pictus : Thick litter layer could be an obstacle to germinate. The seedling needs large amount of light and moisture for successful establishment. Abies holophylla : In spite of high shade tolerance, the growth rate in sapling stage may be extremely slow. Cornus controversa : Seeds (drups) are consumed and dispersed by animals, tending to be not sufficient in seed supply. This species requires large amount of light for successful germination and seedling establishment. Tilia amurensis : The difficulty of seed supply might be expected with low seed purity and double dormancy. Since thick litter layer could be an obstacle to germinate, the species requires moist mineral soils for successful germination. The potential of coppice may be extremely high.

• Nuclear Engineering and Technology
• /
• v.6 no.2
• /
• pp.97-111
• /
• 1974

The adsorption mechanism of Cs-137 in low level radioactive solution by vermiculite treated with Na ion is studied in order to investigate its effective utilization for the radioactive effluent treatment. The beneficial role of Na-vermiculite is that Na ion can induce the wider c-axis spacing in which Cs ion can be sorbed in vermiculite. Cation exchange capacity and distribution coefficient of cesium seems to be influenced by the variation of c-axis spacing of vermiculite. Comparative identification and detection with the characteristic analyses of X-ray diffraction and electron diffraction patterns, diffrential thermal analysis and electron microscopy of Na-, K- and Cs-vermiculite are studied for the phemomena of Cs adsorption by vermiculite. This importance of the utilization in terms of adsorption and fixation of cesium involving vermiculite is discussed. It is found that the Na-vermiculite is valuable outside charging material for high level radioactive liquid waste storage tank of underground to protect the pollution of the underground water.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.501-505
• /
• 2017

Due to the rapid urbanization and increased population, there is an increase in airtight nature of buildings which causes serious indoor air pollution. Among several indoor air pollutants, volatile organic compounds (VOCs) emitted from paint are of major concern. Therefore, there is an urge for the development of environmental friendly paint products. In this wok, a natural wall paint (NWP) was prepared by utilizing a natural clay material "sericite" as a main component. A small chamber test was carried out to identify the toxic substances release from NWP and the results were compared with two eco-friendly commercial paints. The total VOCs were detected in trace level inside the test chamber and their concentrations were below the recommended indoor air quality standards. Toluene was not detected for NWP, whereas formaldehyde was observed in trace level. The toxicity index results were compared with two commercial paints and found that NWP exhibited less harmful gas emission. Based on certification rating of building materials, NWP can be classified as the first grade of building materials. Due to the above advantages, the use of sericite as a major component in NWP will be a useful technique to maintain the indoor air quality.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.201-214
• /
• 1994

The fracture process zone in concrete is a region ahead of a traction-free crack, in which two major mechanisms, microcracking and bridging, play important roles. The toughness due to bridging is dominant compared to toughness induced by microcracking, so that the bridging is dominani: mechanism governing the fracture process of concrete. Fracture mechanics does work for concrete provided that the fracture process zone is being considered, so that the development of model for the fracture process zone is most important to describe fracture phenomena in concrete. In this paper the bridging zone, which is a part of extended rnacrocrack with stresses transmitted by aggregates in concrete, is modelled by a Dugdale-Barenblatt type model with linear tension-softening curve. Two finite element techniques are shown for the analysis of progressive cracking in concrete based on the discrete crack approach: one with crack element, the other without crack element. The advantage of the technique with crack element is that it dees not need to update the mesh topology to follow the progressive cracking. Numerical results by the techniques are demonstrated.

• Journal of the Mineralogical Society of Korea
• /
• v.5 no.2
• /
• pp.61-71
• /
• 1992

Through the low-temperature(60-150${\circ}C$) hydrothermal treatment of perlite with the alkaline solution at various NaOH concentrations, the mode of volcanic glass alteration and resultant zeolite formation were investigated in a closed system. At a temperature of 80${\circ}C$ and alkalinities of pH range 8 to 12, corresponding to the natural environments of diagenetic zeolite formation, only weak dissolution of perlitic glass occurs without zeolite formation despite the residence time of 100 days. Activities of Si and Al increase progressively, as a consequence of increasing pH, whereas activity ratios of Si/Al decrease. Zeolites were synthesized from perlite in the alkaline solution at above 0.1M NaOH concentrations. Below the temperature of 100${\circ}C$ Na-P was mainly formed, whereas analcime was the dominant zeolite at the temperature range of 100-150${\circ}C$. During Na-P synthesis chabazite and Na-X were also formed as by-products in case of lower proportion of solution/sample(<10ml/g) and higher NaOH concentraion (>3M), respectively. The alteration modes of perlite in the zeolite synthesis reflect that the formation of synthetic zeolites occurs as an incongruent dissolution likely with the diagenetic formation of natural zeolites from volcanic glass. Considering much difference in reaction kinetics between natural and synthetic systems, however, the evaluated synthetic conditions in these experiments were not directly applicable to the natural diagenetic system.