• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.537-543
• /
• 2008

To effectively delineate the foundation of stone relics by GPR and seismic refraction methods, a geological engineering model was constructed with alternating layer of soil and gravel to a depth of 3 m. This study was aimed at mapping the boundaries of model ground structure and interfaces of alternating layer using the various frequency antenna in GPR survey and seismic velocities. Compared to the resolution from the high frequency antenna, the image resolution from the survey using 100 Hz antenna is the lower, but with the deeper image coverage. On the contrast, the deeper structure was not mapped in the higher frequency data due to higher absorption effect, but the shallow layered zone was distinctively resolved. Therefore subsurface images were effectively provided by integrating the data with 100 MHz and 450 MHz antennas for the deep and shallow structures, respectively. Regarding the seismic refraction data, the boundaries of the model and interface of the alternating layers were not successfully mapped due to the limit of the survey length. However, the equivalent contours of low velocity extended deep as considerable velocity contrasts with surrounding ground.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.159-162
• /
• 1998

불발 음원에 따른 음원 배열의 빔 패턴 변화와 남극탐사자료에서 원거리장 파형 변화를 분석하였다. 원거리장 파형의 주신호 진폭은 전체 건 부피의 약 40%에 해당하는 음원들이 불발을 일으킬 경우, 탐사성능이 33% 정도 떨어지는 것으로 확인되었다. 같은 간격의 음원들이 불발 시에는 배열형태와 관계없이 길이 및 폭배열의 빔 폭이 동일하게 나타난다. 불발 음원의 부피가 증가됨에 따라 상대적으로 음파 에너지가 작아 지지만 빔 폭이 40$^{\circ}$ - 34$^{\circ}$로 좁아지는 경향을 나타낸다. 따라서 탄성파 탐사에서 필요로 하는 좁은 파형이 생성됨으로써 천부 지층탐사에 적합한 것으로 확인되었다.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.85-98
• /
• 2009

The tau-p inversion algorithm is widely employed to generate starting models with most computer programs, which implement refraction tomography. This algorithm emphasises the vertical resolution of many layers, and as a result, it frequently fails to detect even large lateral variations in seismic velocities, such as the decreases which are indicative of shear zones. This study demonstrates the failure of the tau-p inversion algorithm to detect or define a major shear zone which is 50m or 10 stations wide. Furthermore, the majority of refraction tomography programs parameterise the seismic velocities within each layer with vertical velocity gradients. By contrast, the Generalized Reciprocal Method (GRM) inversion algorithms emphasise the lateral resolution of individual layers. This study demonstrates the successful detection and definition of the 50m wide shear zone with the GRM inversion algorithms. The existence of the shear zone is confirmed by a 2D analysis of the head wave amplitudes and by numerous closely spaced orthogonal seismic profiles carried out as part of a later 3D refraction investigation. Furthermore, an analysis of the shot record amplitudes indicates that a reversal in the seismic velocities, rather than vertical velocity gradients, occurs in the weathered layers. The major conclusion reached in this study is that while all seismic refraction operations should aim to provide as accurate depth estimates as is practical, those which emphasise the lateral resolution of individual layers generate more useful results for geotechnical and environmental applications. The advantages of the improved lateral resolution are obtained with 2D traverses in which the structural features can be recognised from the magnitudes of the variations in the seismic velocities. Furthermore, the spatial patterns obtained with 3D investigations facilitate the recognition of structural features such as faults which do not display any intrinsic variation or 'signature' in seismic velocities.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.80-87
• /
• 2011

Autonomous underwater vehicles (AUVs) present the important advantage of being able to approach the seafloor more closely than surface vessel surveys can. To collect bathymetric data, bottom material information, and sub-surface images, multibeam echosounder, sidescan sonar (SSS) and subbottom profiler (SBP) equipment mounted on an AUV are powerful tools. The 3000m class AUV URASHIMA was developed by the Japan Agency for Marine-Earth Science and Technology (JAMSTEC). After finishing the engineering development and examination phase of a fuel-cell system used for the vehicle's power supply system, a renovated lithium-ion battery power system was installed in URASHIMA. The AUV was redeployed from its prior engineering tasks to scientific use. Various scientific instruments were loaded on the vehicle, and experimental dives for science-oriented missions conducted from 2006. During the experimental cruise of 2007, high-resolution acoustic images were obtained by SSS and SBP on the URASHIMA around the northern Kumano Basin off Japan's Kii Peninsula. The map of backscatter intensity data revealed many debris objects, and SBP images revealed the subsurface structure around the north-eastern end of our study area. These features suggest a structure related to the formation of the latest submarine fan. However, a strong reflection layer exists below ~20 ms below the seafloor in the south-western area, which we interpret as a denudation feature, now covered with younger surface sediments. We continue to improve the vehicle's performance, and expect that many fruitful results will be obtained using URASHIMA.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.79-84
• /
• 2008

Compared to conventional high resolution acoustic profiling, ultra high resolution shallow acoustic profiling is limited in penetration, yet it provides resolution suitable for detailed seabed investigation in the shallow waters. Possible applications include search of buried pipeline, ship wrecks, and other artificial objects through the detailed mapping of thickness and structure of the upper sedimentary layers. In this study, contaminated sediments were discriminated by the correlation of ultra high resolution profiles with geologic data. In addition, the burial depth of submarine cable was measured by the interpretation of acoustic anomalies in the profiles.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2002.11a
• /
• pp.41-45
• /
• 2002

광양만의 지형변화 및 퇴적환경발달양상에 대해 표층퇴적물과 지층탐사자료를 이용하여 연구하였다. 광양만 해역은 1970년대이후 광양만 개발에 따라 해안선 및 해저지형이 급격한 변화를 겪어왔다. 광양만의 면적은 개발이전보다 25%정도 감소하였다. 해안선 변형은 공단건설을 위한 해안매립공사로 인해 그리고 해저지형변화는 대형선박들의 안전항로개발을 위한 해저퇴적물의 준설 등에 의해 발생하고 있다. 표층퇴적물는 점토질 퇴적물 묘도서측 및 여수해만의 외해지역에 주로 분포하고, 사질 퇴적물은 섬진강하구와 수로에 분포하고 있다. 표층퇴적물의 유기물 함량은 퇴적물의 특성을 반영하며, 특히 점토질퇴적물에 다량으로 포함하고 있다. 탄성파 단면도상에서 기반암위에 Unit II와 Unit I가 분포하며, 하부 Unit II는 홀로세 이전의 하천환경 퇴적층으로 판단되며, 홀로세 Unit I 퇴적층은 섬진강하구에서 외해를 향해 전진퇴적양상의 쐐기형태를 보인다. 이 층은 섬진강에서 유출된 퇴적물이 델타환경을 이루면서 형성된 퇴적층서로 해석된다. Unit I 퇴적층내에 천부가스층이 광범위하게 분포한다. 천부가스는 광양만의 생태환경에 영향을 미칠 것으로 판단된다. 광양만 주변의 재발에 따른 해안 및 해저지형의 급격한 변형은 퇴적환경 및 해양환경에 변화를 야기할 것으로 예상된다. 특히 섬진강 하구지역의 광양제철소 건설은 섬진강에서 장양만으로 유입되는 퇴적물의 퇴적작용의 커다란 영향을 미칠 것으로 판단된다.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.52-52
• /
• 2010

동해 한국대지 남부(south Korea Plateau)에서 2010년 2월에 한국해양연구원의 온누리호를 이용하여 해저지형 및 자생광물 탐사가 실시되었다. 다중빔 음향측심기를 이용한 해저지형 조사는 2-3 km 탐사측선 간격으로 약 400 L-km 정도가 실시되었다. 조사구역 A($37^{\circ}$ 16'-18'N, $130^{\circ}$ 02'-16'E)는 890-1,900 m의 수심범위와 남쪽으로 갈수록 수심이 깊어져 울릉분지(Ulleung Basin)와 연결된다. 크고 작은 소규모의 구릉이 사면을 따라 다수 분포하고 있다. 조사구역 B($37^{\circ}$ 26'-40'N, $130^{\circ}$ 23'-34'E)의 정상부는 900-1,000 m로 비교적 평평하게 나타났고, 남동방향으로는 2,200 m까지 급격하게 수심이 증가하는 사면으로 이루어져 있다. 한국대지내 노출 암반지역은 남동쪽 사면의 일부 지역에 분포하고 있다. 자생광물 탐사는 일차적으로 천부지층 탄성파탐사를 수행하여 시료채취 가능 여부를 현장에서 확인한 후에, A 및 B구역내 11개 지점에서 드렛지를 이용하여 암석시료를 채취하였다. 채취된 암석은 주로 현무암이며, 많은 양의 화산기원 부석(pumice) 및 화산재(box core 자료)도 확인되었다. 또한, 인광석으로 추정되는 암석과, 망간단괴(manganese nodules)와 망간각(manganese crust)의 일부 시료도 채취하는데 성과가 있었다.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2007

The MH21 Research Consortium has conducted a high-resolution 3D seismic survey and a seafloor geochemical survey, to explore methane hydrate reservoirs in the eastern Nankai Trough, offshore Japan. Excellent geological information about shallow formations was obtained from the high-resolution 3D seismic survey, which was designed to image the shallow formations where methane hydrates exist. The information is useful in constructing a geological and geochemical model, and especially to understand the complex geology of seafloor, including geochemical manifestations and the structure of migration conduits for methane gas or methane-bearing fluid. By comparing methane seep sites observed by submersibles with seismic sections, some significant relationships between methane hydrate reservoirs, free gas accumulations below the seafloor, and seafloor manifestations are recognised. Bathymetric charts and seafloor reflection amplitude maps, constructed from seismic reflections from the seafloor, are also useful in understanding the relationships over a vast area. A new geochemical seafloor survey targeted by these maps is required. The relationships between methane hydrate reservoirs and seafloor manifestations are becoming clearer from interpretation of high-resolution 3D seismic data. The MH21 Research Consortium will continue to conduct seafloor geochemical surveys based on the geological and geochemical model constructed from high-resolution 3D seismic data analysis. In this paper, we introduce a basis for exploration of methane hydrate reservoirs in Japan by fusion of 3D seismic exploration and seafloor geochemical surveys.

• Journal of the Korean Geophysical Society
• /
• v.7 no.3
• /
• pp.207-215
• /
• 2004

As the sea connecting with the East Sea, the Sea of Okhotsk is the most potential area of gas hydrates in the world. In other to examine geophysical structures of gas hydrate-bearing sediments in the Sea of Okhotsk, the CHAOS (hydro-Carbon Hydrate Accumulation in the Okhotsk) international research expedition was carried out in August 2003. In the expedition, high-resolution seismic and geochemical survey was also conducted. Sparker seismic profiles show only diffusive high-amplitude reflections without BSRs at BSR depth. It means that BSR appears to be completely different images on seismic profiles obtained using different frequencies. Many gas chimneys rise up from BSR depth to seafloor. The chimneys can be divided into two groups with different seismic characteristics; wipe-out (WO) and enhanced reflection (ER) chimneys. Different seismic responses in the chimneys would be caused by amount of gas and gas hydrates filling in the chimneys. In hydroacoustic data, a lot of gas flares rise up several hundreds meters from seafloor to the water column. All flares took placed at the depths within gas hydrate stability zone. It is interpreted that gas hydrate-bearing sediments with low porosity and permeability due to gas hydrate filling in the pore space make good pipe around gas chimneys in which gas is migrating up without loss of amount. Therefore, large-scale gas flare at the site on gas chimney releases into the water column.

• The Korean Journal of Petroleum Geology
• /
• v.10 no.1_2 s.11
• /
• pp.18-22
• /
• 2004

To identify and interpret the distribution and the characteristics of the gas hydrate layers in the Ulleung Basin, we have surveyed and gathered the multi-channel seismic data, Chirp sub-bottom profiler, SeaBeam and 12 m piston core samples since 1996. In previous works, high-resolution seismic profiles showed acoustic anomalies such as acoustic void, acoustic turbidity and pock mark which indicate the presence of gas-charged sediments. The patterns of horizontal degassing cracks originated from free methane expansion is the strong indicator of shallow gas-charged sediments in the core samples. The observation of submarine slides and slumps from destabilizing the sediments in the southern part of the Ulleung Basin may also point out that the gas had been released from gas hydrate dissociation during lowstand of sea level. The multi-channel seismic data show BSR, blanking and phase reversal. The gas hydrate layers above which large-scale shallow gases are distributed exist at the depth of about 200 m from the sea-floor with water depth of 2,100 m. From the interpretation of seismic sections in the southern Ulleung Basin, gas hydrate layers occur in the Pleistocene-Holocene sediments. These gas-charged sediments, acoustic anomalies and BSR may be all related to the existence of gas hydrate layers in the study area.