• Explosives and Blasting
• /
• v.20 no.2
• /
• pp.33-41
• /
• 2002

화약류를 사용하여 암반을 절취하는 작업현장에서의 발파공해는 항상 발생하고 있다. 특히 폭약의 폭발로 인해 발생하는 지반진동은 크고 작은 문제를 야기하고 있다. 일반적으로 발파현장에서 사용하고 있는 일반발파와 진동제어(미진동)발파에 대한 의미와 구분 및 시공에 대해 인식시키고자 그동안의 경험과 이론을 토대로 하여 연구하게 되었다. 본 연구에서는 일반발파와 진동제어발파를 구분하는 요소로 암분류 및 진동속도를 지발당장약량과 관계, 암분류에 따른 비장약량 및 발파공당 암절취량 그리고 천공경을 선정하여 고찰하였다. 이들 요소를 기준으로 일반발파와 진동제어발파의 경계가 되는 보안물건으로부터 거리 산출방법에 대해서 연구하였다. 일반발파나 진동제어발파 모두 보안물건에는 한계 진동속도 이내의 진동이 전달되어야 하며, 그 경계가 되는 발파공당 절취암량은 연암의 경우 약$16.67m^3$, 보통암의 경우 약$12.5m^3$, 경암의 경우 약 $10m^3$을 기준으로 하는 것이 바람직하고, 그 경계가 되는 보안물건으로부터 거리는 일정하게 정해진 것이 아니므로 현장에서 대상암반에 대해 시험발파를 실시하여 암분류, 비장약량, 지발당장약량, 한계 진동속도를 기준으로 결정하는 것이 바람직하다. 진동제어(미진동)발파구간내에서 발파설계단가는 일률적이 아닌 약2~3구간으로 분할하여 산출해야한다.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.2
• /
• pp.209-213
• /
• 2006

Purpose: Conventional transtibial approach for the anterior cruciate ligament (ACL) reconstruction tended to place the femoral tunnel in too vertical position (11 or 1 o'clock), which could provide the postoperative anteroposterior (AP) stability but not provided the rotational stability. Therefore we present a surgical technique to make the transtibial femoral tunnel at 10 or 2 o'clock position. Surgical approach: To make a transtibial femoral tunnel at the 10 or 2 o'clock position, the direction and position of the tibial drill guide was important. We set the tibial drill guide at $40{\sim}45$ degrees and the intraarticular guide tip was 1 mm anterior and medial to the conventional site. The starting point for the guide pin on the proximal tibia was proximal to the pes anserinus and anterior to the medial collateral ligament. The tibial tunnel was initially drilled 1mm less than the diameter of the graft. Then femoral offset guide could be easily placed at 10 or 2 o'clock position through the tibial tunnel. The tibial tunnel and the femoral tunnel of 30 mm in length were made with the reamer that was same size with the graft. Conclusion: We report a surgical technique to create a transtibial femoral tunnel at 10 or 2 o'clock position in ACL reconstruction to provide the rotational stability as well as the AP stability.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.589-604
• /
• 2021

Waterjets for rocks have various advantages of the non-contact and eco-friendly excavation using only water and abrasive. To overcome the problems (e.g., dust and noise occurrence) of the conventional drilling methods, waterjet excavation methods are broadly used. It is advantageous to operate a couple of nozzles in order to increase the waterjet excavation efficiency. When multiple nozzles are used, it is essential to analyze the excavation performance and shape according to the nozzle operation method. In this study, nozzle angle, horizontal distance between nozzles, and standoff distance were defined as nozzle operating parameters and the excavation performance and shape were analyzed. As a result of the experiment, when the nozzle angle and standoff distance are increased, the excavation depth is decreased and the effective depth tends to be increased. In addition, based on the experimental results, the excavation shape criteria required for nozzle insertion were proposed and optimal nozzle operating parameters were derived according to the criteria. This study result is expected to be used as useful basic research in the future development of multiple waterjet nozzles for rock drilling.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.206-213
• /
• 2005

Purpose: To evaluate the outcome of symptomatic osteochondritis dissecans of the talus treated with arthroscopic debridement and multiple drilling. Materials and Methods: Between 1997 and 2003, 14 arthroscopic debridement(group I) and 15 arthroscopic multiple drilling(group II) were performed. There are 21 male and 8 female patients. Mean age was 34.4 years(33.8 years in group I, 37.5 years in group II) and average follow-up period was 43.2 months(46.4 months in group I, 40.1 months in group II). Simple radiographs and MRI were performed preoperatively and postoperatively, and the progressive stage of the lesions was evaluated through the arthroscopic surgery. Clinical results were evaluated with ankle-hindfoot scale and scoring scale for subjective and objective functional outcomes. The results were compared between 2 groups. Results: There are 20 medial(7 in group I, 13 in group II), 6 lateral(5 in group I, 1 in group II), and 3 both-side(2 in group I, 1 in group II) lesions. According to the classification of Berndt and Harty, there are 4 stage II(4 in group I, 0 in group II), 19 stage III(9 in group I, 10 in group II), and 6 stage IV(1 in group I, 5 in group II). According to the ankle-hindfoot score, the mean score was significantly improved $53.1{\pm}2.7$ points preoperatively to $85.1{\pm}8.5$ points postoperatively in group I and $54.6{\pm}6.8\;to\;80.7{\pm}8.5$ points group II. Subjective and functional scores was also improved $49.6{\pm}10.5$ points preoperatively to $84.6{\pm}7.7$ points postoperatively in group I and $50.7{\pm}9.2\;to\;83.0{\pm}9.6$ points in group II. But there were no statistical significance between them. Conclusion: Arthroscopic debridement and multiple drilling for the treatment of osteochondral lesions of the talus showed successful results and there was no statistically significant difference between them.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.799-806
• /
• 2012

This experiment was conducted to establish the optimum conditions for high $CO_2$ gas treatment in combination with a proper gas-permeable packaging film to maintain the quality of fig fruit (Ficus carica L). Among the fig fruits with different high $CO_2$ treatments, the quality change was most effectively controlled during storage in the 70%-$CO_2$-treated fig fruit. Harvested fig fruit was packaged using microperforated oriented polypropylene (MP) film to maintain the optimum gas concentrations in the headspace of packaging for the modified-atmosphere system. MP film had an oxygen transmission rate of about $10,295cm^3/m^2$/day/atm at $25^{\circ}C$. The weight loss, firmness, soluble-solid content (SSC), acidity (pH), skin color (Hunter L, a, b), and decay ratio of the fig fruits were monitored during storage at 5 and $25^{\circ}C$. The results of this study showed that the OPP film, OPP film + 70% $CO_2$, and MP film+70% $CO_2$ were highly effective in reducing the loss rate, firmness and decay occurrence rate of fig fruits that were packaged with them during storage. In the case of using treatments with packages of OPP film and OPP film+70% $CO_2$, however, adverse effects like package bursting or physiological injury of the fig may occur due to the gas pressure or long exposure to $CO_2$. Therefore, the results indicated that MP film containing 70% $CO_2$ can be used as an effective treatment to extend the freshness of fig fruits for storage at a proper low temperature.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.82-85
• /
• 2009

Purpose: In anterior cruciate ligament (ACL) reconstruction, preservation of the remnant original tissue might promote graft healing and be helpful in proprioception. But this procedure is difficult and causes the notch impingement. So we introduce a surgical technique that makes a transtibial femoral tunnel at 10 or 2 o'clock position with preservation of remnant tissue. Surgical approach: We tried to preserve the remnant tissue and synovium as much as possible, especially those of tibial attachment and extending to the posterior cruciate ligament (PCL), so as to have some tension and to prevent notch impingement. We set the tibial drill guide at 40~45 degrees and the intra-articular guide tip was 1 mm anterior and medial to the conventional site. The starting point of tibial guide pin was proximal to the pes anserinus and anterior to the medial collateral ligament. When the reamer approached the cortical bone of the tibial articular surface, the reamer must be advanced very carefully to minimize injury to the remnant tissue. The tibial and femoral tunnel at 10 or 2 o'clock position were made with the reamer, the diameter of which was same with that of the graft. Conclusion: We report a remnant preserving technique in ACL reconstruction that makes a transtibial femoral tunnel at 10 or 2 o'clock position

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.116-122
• /
• 2014

This study was conducted to find out the appropriate packaging materials to extend the storability and maintain the quality of cherry tomato for modified atmosphere (MA) storage. Tomatoes were grown by hydroponic at a plastic house in Gangwon Province. Light red maturity stage tomatoes were harvested and packed with MA condition (10,000; 20,000; 40,000; 60,000; 80,000; and $100,000cc/m^2.day.atm$ $O_2$ permeability film) and perforated film to store at $5^{\circ}C$, $11^{\circ}C$ and $24^{\circ}C$. The fresh weight loss was less than 0.6% in all non-perforated breathable films at $^5{\circ}C$, $11^{\circ}C$, and $24^{\circ}C$, but perforated film had less than 2.93% at $5^{\circ}C$, 13.29% at $11^{\circ}C$ and 27.24% at $24^{\circ}C$. The 20,000cc at $5^{\circ}C$ and $11^{\circ}C$, and the 40,000cc film at $24^{\circ}C$ balanced optimum carbon dioxide and oxygen concentration in the package to maintain quality. The 10,000cc film was appeared the significantly highest ethylene concentration at $5^{\circ}C$, $11^{\circ}C$, and $24^{\circ}C$, this film had the lowest $O_2$ permeability. Visual quality, firmness, and soluble solids were maintained in 20,000cc films both at $5^{\circ}C$ and $11^{\circ}C$, the 40,000cc film at $24^{\circ}C$. There was no any trend in titratable acidity and vitamin C content of treated packed film types and temperatures at cherry tomatoes packages. Therefore, the appropriate MA condition for $5^{\circ}C$ and $11^{\circ}C$ is $20,000cc/m^2.day.atm$ $O_2$ permeability film; for $24^{\circ}C$ it is $40,000cc/m^2.day.atm$ $O_2$ permeability film because those films extended the storability through the firmness, soluble solids as well as visual quality.

• Journal of Hospice and Palliative Care
• /
• v.12 no.2
• /
• pp.49-55
• /
• 2009

Self expandable metal stent (stent) implantation of upper gastrointestinal (UGI) tract is now widely accepted for the palliation of obstructive symptoms caused by inoperable malignant UGI obstruction. With the technical progress and accumulation of clinical experiences, it became possible to perform the procedure easily, safely and effectively. However, clinicians should pay attention to the post-procedural care, because early or late complications such as ulceration, pain, bleeding, food impaction, perforation, migration or in-stent tumor growth could occur. In this review, several topics about stent placement in the UGI tract are discussed, such as major indications for stenting, kinds of stents, and post-procedural management.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.443-443
• /
• 2021

국내 하천, 호소에 유입되는 오염물질 중 30% 이상이 농업 활동 등으로부터 기인한다. 정부 부처는 '04년부터 농업 비점오염원 저감 대책을 수립·시행하고 있으나 농촌 인구 고령화, 열악한 재정환경, 관행화·고착화 된 농법 등으로 인해 주민참여 및 대책 적용의 한계가 있었다. 금호강 상류 보현산댐 유역은 대부분 임야로 고현천 등 상류 하천변에 사과원이 밀집되어 있다. 또한, 유역면적이 32.16km²로 좁고, 유로 연장 5km 이내로 짧으며 하천 경사가 급해 강우시 토양 유실량이 많고 유출속도가 빠르다. 이러한 유역 특성상 상류 사과원은 '16년 보현산댐 담수 이후 매년 반복적으로 발생하는 녹조 등 수질 문제를 초래하는 주요 비점오염원으로 지역사회 이슈가 되었다. 이에 따라 K-water는 낙동강수계관리위원회 환경기초조사사업의 일환으로 지역주민들과 논의를 통하여 댐 상류 사과원에 친환경농법(심층시비)를 적용하고 수질 개선 효과를 분석하였다. 심층시비는 과수 주변 토양 천공 후 퇴비를 시비하는 친환경농법으로 표층시비에 비해 초기 강우유출 오염물질량을 저감하고 퇴비 사용량도 줄일 수 있다. 금번 연구에서 실제 운영 중인 농지('19년 24천평, '20년 27천평)을 대상으로 심층시비를 시범적용한 결과, 퇴비 사용량은 표층시비의 50% 수준으로 감소하였고 과수 생육 및 품질에는 큰 영향이 없는 것으로 나타났다. 강우 시 유출농도는 표층시비 대비 TOC 5.0~41.3%, T-P 4.0~57.3% 감소했다. HSPF 유역 모델링 분석 결과, 전체 과수원 중 70% 농지에 심층시비를 적용한 경우, 하절기 유역 T-P 유입부하량이 5.0~6.8%(소유역 최대 28.2%) 감소하는 것으로 예측되었다. 본 연구결과를 바탕으로 심층시비를 확대 적용하고 유역 수질관리에 기여하고자 한다.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.243-249
• /
• 2013

This paper presents a tool-path generation methods for an automated robotic system for skull drilling, which is performed to access to some neurosurgical interventions. The path controls of the robotic system are classified as move, probe, cut, and poke motions. The four motions are the basic motion elements of the tool-paths to make a hole on a skull. Probing, rough cutting and fine cutting paths are generated for skull drilling. For the rough cutting path circular paths are projected on the offset surfaces of the outer top and the inner bottom surfaces of the skull. The projected paths become the paths on the top and bottom layers of the rough cutting paths. The two projected paths are blended for the paths on the other layers. Syntax of the motion commands for a file format is also suggested for the tool-paths. Implementation and simulation results show that the possibility of the proposed methods.