• Title/Summary/Keyword: 척추 기구

Search Result 32, Processing Time 0.03 seconds

Kinematic Analysis of Thoraco-Lumbar Spine in Bad Postures During Daily Life (일상 생활 중의 나쁜 자세에 따른 흉·요추 관절의 기구학 해석)

  • Han, Ah-Reum;Jeong, Ji-In;Feng, Jun;Kim, Yoon-Hyuk
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.36 no.11
    • /
    • pp.1105-1110
    • /
    • 2012
  • The spine is one of the most important skeletal joints, and it strongly affects the health of the musculoskeletal system. A normal spine has an S-shape, and it is very important to maintain this shape. Recently, spinal diseases such as low back pain have increased rapidly, especially among the elderly. Some of these diseases are caused by congenital spinal disorders and sporting and accident injuries as well as by bad postures. Improper spinal postures could generate excessive disc pressure, which is related to degeneration and pain. Therefore, in this study, we investigated the three-dimensional kinematic parameters of the thoraco-lumbar joint in several bad postures using a motion capture analysis technique. Different bad postures created a significant amount of flexion/extension, side bending, and axial rotation angle compared with neutral postures. Further study is necessary to investigate the disc pressure and ligament force due to the increase in joint rotation from the bad postures.

Objective Evidence for the Effectiveness of Single-session Treatment with a Spinal Thermal Massage Device: A Pilot Study (척추온열마사지기기의 1회 치료의 효과에 대한 객관적 증거: 선행 연구)

  • Na, Yeong-Il;Kim, Si-Yun;Baek, Seung-Min;Lee, Jong-Hoo
    • Journal of Industrial Convergence
    • /
    • v.20 no.10
    • /
    • pp.209-218
    • /
    • 2022
  • Individuals often report significant relief from pain and stress even after a single session of massage therapy; however, no previous studies have provided objective evidence supporting the effectiveness of a solitary massage therapy session. In the present study, we aimed to investigate the effectiveness of one-time treatment with a spinal thermal massage device reported to exert the same therapeutic effects as massage therapy in terms of pain reduction and stress relief. A man with chronic low back pain (LBP) underwent two rounds of experiments involving spinal massage treatment and bed rest, respectively. Pain was assessed using a visual analog scale, and heart rate variability (HRV) was measured in real-time to examine autonomic nervous system (ANS) activity. Blood samples were obtained at five points during each round of the experiment to examine changes in cortisol, epinephrine, and norepinephrine. Spinal massage significantly reduced pain and enhanced parasympathetic activity when compared with the bed rest condition. In addition, both epinephrine and norepinephrine levels were lower following spinal massage than following bed rest. These results are consistent with the reported effects of conventional massage therapy and support the effectiveness of one-time treatment using a spinal thermal massage device.

Analysis of Scoliosis Correction Effects according to Instrumentation Devices using a Finite Element Model (유한요소 모델을 이용한 척추 측만증 교정 시 교정 기구에 따른 효과 분석)

  • 김영은;손창규;이광희;최형연;이춘기
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.21 no.8
    • /
    • pp.157-163
    • /
    • 2004
  • Scoliosis is a complex musculoskeletal dieses requiring 3-D treatment with surgical instrumentation. To investigate the effects of correction surgery, a finite element model of personalized model of the scoliotic spine that will allow the design of clinical test providing optimal estimation of the post-operation results was developed. Three dimensional skeletal parts, such as vertebrae, clavicle and scapular were modeled as rigid bodies with keeping their morphologies. Kinematical joints and spring elements were adapted to represent the inter-vertebral disc and ligaments respectively. With this model, two types of surgery procedure, distraction procedure with Harrington device and rod derotation procedure with pedicle screw and rod system had been carried out. The obtained simulation results were comparatively corresponding to the post operational outcomes and successfully demonstrated qualitative analysis of surgical effectiveness. From this analysis, it has been found that the preparing of appropriate rod curvature and its insertion was more important than just performing the excessive derotation for scoliosis correction.

Design of the Interspinous Process Fixator Using Biomechanical Analysis for the Treament of Degenerative Lumbar Spinal Stenosis (퇴행성 요추부 척추관 협착증 치료를 위한 극돌기간 고정기구의 설계 및 생체역학적 분석)

  • Heo S.;Son K.;Lee S.J.;Moon B.Y.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.06a
    • /
    • pp.1963-1966
    • /
    • 2005
  • Degenerative lumbar spinal stenosis(DLSS) is a disease inducing low back pain, leg pain, convulsion, numbness, and neurogenic claudication from compression of nerve root. Intervertebra fixation was reported to increase the degenerative of neighbor region after treatment. Recently, a new surgical technique of inserting a fixator between interspinous processes has been introduced. The purpose of this study is to design of the interspinous process fixator with flexibility to complement the trouble of using fixator in DLSS. This study evaluated the existing fixator through the mechanical test and modified fixators using the finite element analysis(FEA). Displacement, stiffness and Von-Mises stress were found to have similar values to those obtained from the mechanical test and the FEA in the biomechanical loading condition. Effects of variation in length and thickness were investigated to design an optimal fixator.

  • PDF

Biomechanical Analysis of Lumbar Interspinous Process Fixators (요추부 극돌기간 고정기구의 생체역학적 해석)

  • Heo Soon;Park Jung-Hong;Lee Sung-Jae;Son Kwon
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.23 no.3 s.180
    • /
    • pp.195-202
    • /
    • 2006
  • The degenerative lumbar spinal stenosis (DLSS) is a disease inducing low back pain, leg pain, convulsion. numbness, and neurogenic claudication from compression of nerve root. Intervertebra fixation was reported to increase the degeneration of neighbor lesion after treatment. Recently, a new surgical technique of inserting a fixator between interspinous processes has been introduced. The purpose of this study is to design the interspinous process fixator with flexibility to complement the trouble of using fixator in DLSS. This study evaluated the existing fixator through the mechanical test and modified it using the finite element analysis (FEA). The evaluation was based on the displacement, stiffness and von-Mises stress obtained from the mechanical test and calculated from the FEA in the biomechanical loading condition. Effects of variation in length and thickness were investigated to design an optimal fixator. Three prototypes were manufactured using FEA results. Mechanical tests under the biomechanical loading condition were performed to select the best one from these three. The selected fixator increased flexiblity by 32.9%.

The Manufacture of Digital X-ray Devices and Implementation of Image Processing Algorithm (디지털 X-ray 장치 제작 및 영상 처리 알고리즘 구현)

  • Kim, So-young;Park, Seung-woo;Lee, Dong-hoon
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.21 no.4
    • /
    • pp.195-201
    • /
    • 2020
  • This study studied scoliosis, one of the most common modern diseases caused by lifestyle patterns of office workers sitting in front of computers all day and modern people who use smart phones frequently. Scoliosis is a typical complication that takes more than 80% of the nation's total population at least once. X-ray are used to test for these complications. X-ray, a non-destructive testing method that allows scoliosis to be easily performed and filmed in various areas such as the chest, abdomen and bone without contrast agents or other instruments. We uses NI DAQ to miniaturize digital X-ray imaging devices and image intensifier in self-shielding housing with Vision Assistant for drawing lines to the top and the bottom of the spine to acquire angles, i.e. curvature in real-time. In this way, the research was conducted to see scoliosis patients and their condition easily and to help rapid treatment for solving the problem of posture correction in modern people.

The Usefulness of Diffusion-weighted MR Imaging for Differentiation between Degenerative Spines and Infectious Spondylitis (퇴행성 척추와 감염성 척추염의 감별에 있어서 확산강조영상의 유용성)

  • 박원규;변우목;최준혁
    • Investigative Magnetic Resonance Imaging
    • /
    • v.6 no.2
    • /
    • pp.152-157
    • /
    • 2002
  • Purpose : The differential diagnosis between Modic type I degenerative spine and infectious spondylitis sometimes is difficult, because the affected bone marrows in both disease show similar signal intensity on conventional MR imaging. We evaluate the usefulness of diffusion-wighted MR imaging for differential diagnosis between Modic type I degenerative spine and infectious spondylitis. Materials and methods : The spin-echo and diffusion-weighted MR images of eight patients with Modic type I degenerative spines and 14 patients with infectious spondylitis diagnosed by clinical findings or CT-guided biopsies we re analyzed. The diffusion-weighted imaging sequence was based on reversed fast imaging with steady-state precession (PSIF). Signal intensity changes of the vertebral bone marrow on conventional spin-echo and diffusion-weighted MR imaging were compared between degenerative spine and infectious spondylitis. Results : On T1-weighte d images, the affeted bone marrow in both disease showed hypointense signals. On T 2-weighted images, all of type I degenerative spine and 11 of infectious spondylitis showed hyperintensity, and three of infectious spondylitis showed heterogeneo us mixed signal intensity. On diffusion-weighted MR images, all of type I degenerative spine were hypointense with peripheral high signal intensity to normal vertebral body, but infectious spondylitis was hyperintense (n = 11) and hypointense (n=3). Conclusion : Diffusion-weighted MR imaging is useful to differentiate Modic type I degenerative spine from infectious spondylitis. On diffusion-weighted images, the high singal intensity of bone marrow suggests infectious spondylitis, whereas the low signal intensity of bone marrow with peripheral focal high signal intensity suggests type I degenerative spine.

  • PDF

Imaging Evaluation of Early and Long-Term Complications Associated with the Postoperative Spine (척추 수술 후 영상 평가: 초기 및 중장기 합병증)

  • Jae Hwi Park;Dong Hyun Kim;Jee Won Chai;Hyo Jin Kim;Jiwoon Seo;Jin Young Son
    • Journal of the Korean Society of Radiology
    • /
    • v.85 no.1
    • /
    • pp.36-53
    • /
    • 2024
  • As the number of spinal surgeries being performed expands, the number of medical imaging procedures such as radiography, CT, and MRI is also increasing, and the importance of their interpretation is becoming more significant. Herein, we present the radiological findings of a variety of complications that can occur after spinal surgery and discuss how effectively and accurately they can be diagnosed through imaging. In particular, this study details the characteristic imaging findings specific to the early and long-term postoperative periods. Early complications of spinal surgery include improper placement of surgical instruments (instrument malpositioning), seromas, hematomas, pseudomeningoceles, and infections in the region surrounding the surgical site. Conversely, long-term complications may include osteolysis around surgical instruments, failure of fusion, adjacent segment disease, and the formation of epidural fibrosis or scar tissue. A precise understanding of the imaging assessments related to complications arising after spinal surgery is crucial to ensure timely and accurate diagnosis, which is necessary to achieve effective treatment.

Considerations for Fluoroscopic Guided Intervention in Lumbar Spine (방사선 투시장치를 이용한 요추 중재술 시 고려점)

  • Kim, Dong-Hyun;Song, Kwang-Sup
    • Journal of the Korean Orthopaedic Association
    • /
    • v.55 no.3
    • /
    • pp.210-221
    • /
    • 2020
  • Spinal block procedures are useful methods that reduce the need for surgical treatment. In addition to their therapeutic aspects of pain relief, in many patients, they are also used for diagnostic purposes to distinguish from symptoms originating from extra-spinal areas. Therefore, these procedures are the most basic technique for orthopedic surgeons dealing with diseases from limbs and spine. On the other hand, despite the simplicity of the instruments and drugs used, the overall understanding of them and the lack of knowledge of the possible side effects and complications can cause serious harm to the patient at the beginning of the trial. Therefore, it is necessary to understand the types of drugs used in the spinal block procedures, pharmacokinetic properties, and the side effects of each drug. In addition, efforts should be made to identify their indications, as well as advantages and disadvantages of each procedure to avoid possible complications. The purpose of this review was to provide basic knowledge and skills necessary for lumbar spinal block procedures as well as provide the reader with the ability to perform themselves.