• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.603-617
• /
• 2023

This study aims to provide a better understanding of the turbulent flow characteristics in swash zone. A double dam-break method is employed to generate the swash zone flow. Comparing with the conventional single dam-break method, a delay between two gate opening can be controlled to reproduce various interactions between uprush and backwash. For numerical simulations, overInterDyMFoam based on OpenFOAM is adopted. Using overInterDyMFoam, interface between two immiscible fluids having different densities (i.e., air and water phases) can be tracked in a moving mesh with multiple layers. Two-dimensional Reynolds-Averaged Navier-Stokes equations are solved with a standard 𝜅-𝜖 turbulence model for momentum and continuity. Numerical model results are validated with laboratory experiment data for the time series of water depth and streamwise velocity. Turbulent kinetic energy distribution is further investigated to identify the turbulence evolution for each flow regime (i.e., uprush, backwash, and swash-swash interaction).

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.59-59
• /
• 2011

파랑의 전파와 변형에 대한 연구에는 수심방향으로 적분한 2차원방정식인 완경사방정식과 Boussinesq 방정식을 기반으로 한 수치모형을 이용한 연구가 최근까지 가장 활발하게 진행되어 오고 있다. 그러나 실제 구조물의 설계에는 2차원 수치모형에서 고려할 수 없는 수심방향 유속에 기인한 정확도의 문제로 인해 구조물의 형상과 재원을 설계하기 위한 정교한 수치모형실험이 어려워 주로 수리모형실험에 의존해 왔다. 수리모형실험은 실제 현상을 가장 잘 재현해낼 수 있어 신뢰성이 매우 높지만 다양한 실험을 수행하기가 어렵고 많은 시간과 비용이 소요되는 단점이 있다. 이에 따라 최근 수심방향으로 완전한 운동방정식인 Navier-Stokes 방정식을 푸는 3차원 수치모형에 대한 연구가 활발히 진행되고 있다. 이론적으로 매우 우수한 모형이긴 하나 정확도 높은 결과를 얻기 위해서는 매우 조밀한 격자를 필요로 하기 때문에 아직까지 막대한 계산시간이 필요하다는 단점이 있으나 컴퓨터 기술이 급격한 속도로 발전하고 있어 Navier-Stokes 방정식 모형의 적용 가능성은 계속 높아지고 있다. 파랑변형을 다루는 수치모형실험을 수행할 때 외부조파를 사용할 경우 구조물이나 지형에 의해 반사되어 나온 파랑이 조파지점에 도달할 때 실험영역으로 재 반사되는 문제가 발생한다. 이를 해결하기 위해 내부조파기법의 개발에 대한 연구가 필수적이었으며, 자유수면변위를 변수로 사용하는 모형의 경우 그 연구가 매우 활발하게 진행되어 왔다. 한편, Navier-Stokes 방정식 모형의 경우 자유수면변위를 변수로 사용하는 2차원 모형에 비해 상대적으로 연구가 미흡하였다. 본 연구에서는 기존의 연직 2차원 Navier-Stokes 방정식 모형에 사용된 연속방정식에 질량 원천항을 추가하는 내부조파기법을 도입하여 3차원 수치모형에서 고립파를 내부조파하고, 급경사에서의 고립파의 처오름 및 처내림 현상을 수리모형 실험결과와 비교 및 분석하였다. 수치모형은 Navier-Stokes 방정식을 엇갈림 격자체계에서 계산하는 동수압 모형으로서, Two-step projection 기법을 사용하는 유한차분모형을 사용하였다. 본 수치모형은 난류의 해석을 위해서 상대적으로 큰 에디(eddy)만을 고려하는 SANS(spatially averaged Navier-Stokes) 방정식을 계산하는 LES(large-eddy-simulation) 기반의 수치모형으로, 난류 모델링을 위해 Smagorinsky LES 모형을 사용한다. 또한, 압력장의 계산을 위해 Bi-CGSTAB 기법을 이용하여 Poisson 방정식의 해를 구하였으며, 자유수면 추적을 위하여 2차 정확도의 VOF(volume-of-fluid) 기법을 사용하였다. 수치모형실험이 전체적으로 수리모형실험에서 관측한 파랑의 처오름 및 처내림 현상을 잘 재현하고 있는 것으로 나타났으며, 정량적인 비교를 통해 수치모형의 성능을 검증하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.723-728
• /
• 2014

Hydraulic experiments are performed in order to verify the swash effect of seashore structures installed to prevent scouring. However, a great deal of investment and time are required for producing the test apparatus and seashore structure used to perform the hydraulic experiment. The swash effect can be predicted, however, by using a numerical model and validation can be done based on comparisons of the numerical model and hydraulic experiment analysis results, thereby saving the cost and time required for producing the test apparatus and seashore structure. Taking a polyhedral rubble mound structure as the subject, this study performed a comparative analysis of wave run-up and run-down height of the numerical model interpretative results and the hydraulic experiment results, and validated the interpretative simulation wave test modeling technique. The study also predicted the swash effect by using the numerical interpretation approach method, whereby the volume ratio and friction area of the rubble mound were varied for different results.

• Journal of computational fluids engineering
• /
• v.19 no.4
• /
• pp.52-60
• /
• 2014

Recently, coastal structures have been built to protect coastal areas. However, if a tidal wave caused by an earthquake hits the coast, it would cause catastrophic damages. It is important to analyze the basics and the characteristics of a tsunami to reduce damages caused by natural disasters. In this study, a tsunami passing over different topographical changes is simulated with VOF method based on FVM(Finite Volume Method). The reduction of both scale and velocity is accomplished by similarity analysis, and an initial energy is generated by increasing the water level as needed to create a tsunami as if it is caused by a crustal movement. It is found that the present method is appropriate to simulate the tsunami with its mechanism.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.581-589
• /
• 2019

In order to understand the characteristics of beach deformation, in this study, numerical simulations were conducted using a 3-D hydro-morphodynamic model (HYMO-WASS-3D) to analyze the characteristics of beach deformation due to the coastal groundwater levels. HYMO-WASS-3D directly analyzed the nonlinear interaction between the hydrodynamic and morphodynamic processes in the coastal area. The simulation results of HYMO-WASS-3D showed good agreement with the experimental results on the changes in the profile of the beach in the surf and swash zones. Then, numerical simulations were conducted to examine the characteristics of beach deformation due to the variation of the level of the coastal groundwater. As a result, the beach profiles were examined in relation to the wave breaking in the surf zone and the wave uprush and backwash in the swash zone due to the differences in the water levels. This paper also discussed the temporal and spatial distributions of the velocities, vorticities, and suspended sediments in the surf and swash zones with various levels of the coastal groundwater.

• Journal of Korea Water Resources Association
• /
• v.43 no.9
• /
• pp.801-811
• /
• 2010

A three-dimensional numerical model called NEWTANK is employed to investigate solitary wave run-up with an internal wave-maker on a steep slope. The numerical model solves the spatially averaged Navier-Stokes equations for two-phase flows. The LES (large-eddy-simulation) approach is adopted to model the turbulence effect by using the Smagorinsky SGS (sub-grid scale) closure model. A two-step projection method is adopted in numerical solutions, aided by the Bi-CGSTAB (Bi-Conjugate Gradient Stabilized) method to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate VOF (volume-of-fluid) method is used to track the distorted and broken free surface. A solitary wave is first internally generated and propagated over a constant water depth in the three-dimensional domain. Numerically predicted results are compared with analytical solutions and numerical errors are analyzed in detail. The model is then applied to study solitary wave run-up on a steep slope and the obtained results are compared with available laboratory measurements.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1107-1118
• /
• 2021

Climate change brought on by global warming increased the frequency of flood and drought on the Korean Peninsula, along with the casualties and physical damage resulting therefrom. Preparation and response to these water disasters requires national-level planning for water resource management. In addition, watershed-level management of water resources requires flow duration curves (FDC) derived from continuous data based on long-term observations. Traditionally, in water resource studies, physical rainfall-runoff models are widely used to generate duration curves. However, a number of recent studies explored the use of data-based deep learning techniques for runoff prediction. Physical models produce hydraulically and hydrologically reliable results. However, these models require a high level of understanding and may also take longer to operate. On the other hand, data-based deep-learning techniques offer the benefit if less input data requirement and shorter operation time. However, the relationship between input and output data is processed in a black box, making it impossible to consider hydraulic and hydrological characteristics. This study chose one from each category. For the physical model, this study calculated long-term data without missing data using parameter calibration of the Soil Water Assessment Tool (SWAT), a physical model tested for its applicability in Korea and other countries. The data was used as training data for the Long Short-Term Memory (LSTM) data-based deep learning technique. An anlysis of the time-series data fond that, during the calibration period (2017-18), the Nash-Sutcliffe Efficiency (NSE) and the determinanation coefficient for fit comparison were high at 0.04 and 0.03, respectively, indicating that the SWAT results are superior to the LSTM results. In addition, the annual time-series data from the models were sorted in the descending order, and the resulting flow duration curves were compared with the duration curves based on the observed flow, and the NSE for the SWAT and the LSTM models were 0.95 and 0.91, respectively, and the determination coefficients were 0.96 and 0.92, respectively. The findings indicate that both models yield good performance. Even though the LSTM requires improved simulation accuracy in the low flow sections, the LSTM appears to be widely applicable to calculating flow duration curves for large basins that require longer time for model development and operation due to vast data input, and non-measured basins with insufficient input data.