• Information Display
• /
• v.5 no.5
• /
• pp.10-12
• /
• 2004

우수한 화질특성을 나타내는 새로운 반투과형 액정모드를 개발했다. 단일 셀캡 구조에서 감마(Gamma) 보정없이 투과모드와 반사모드를 동시에 구동하기 위해 유기막을 이용하여 반사모드 영역의 액정 Cap을 두 가지로 분리하는 새로운 설계구조를 도입했다. 반사모드 영역의 액정 Cap을 순수한 액정 $Cap(C_{LC})$과 유기막 $Cap(C_{OL})$으로 분리함으로써 액정에 걸리는 실제 전압을 조절하게 되어 단일 셀캡 구조에서도 감마 보정없이 우수한 특성을 나타내는 반투과형 VA 액정모드를 개발하였다. 이러한 Cap-Divided 방식의 신규 VA 액정모드는 높은 콘트라스트, 광시야각 특성 및 공정 단순화의 장점이 있기 때문에 향후 반투과형 LCD에 적극적인 채용이 기대되어진다.

• 전기의세계
• /
• v.38 no.3
• /
• pp.4-11
• /
• 1989

전력계통 규모의 확장, 전원입자의 원격화, 원자력발전의 증가, 효율적 에너지 사용의 필요성은 파워플랜트의 운전모드의 급격한 변화를 요구하고 있다. 새로운 운전모드를 검토함에 있어 플랜트 모델은 필수적인 도구이며 발표된 문헌들을 중심으로 모델링 노력을 소개하였다. 특히 우리나라의 경우 원자력발전 비중이 최근에 급속히 증가하여 파워플랜트의 새로운 운전모드 채용이 불가피하여 이 분야연구에 대한 투자 및 인력의 양성은 당면과제라고 하겠다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.328-334
• /
• 2001

Up to now. vibration analysis and vibration engineering have been developed, encompassing the aspects of both experimental and analytical techniques. Using experimental modal analysis or modal testing, the mode shapes and frequencies of practical structure can be measured accurately. Curve-Fitting Method is realized through experimental modal identification. In the experimental modal parameter estimation, the estimation of modal damping factor is difficult for complicated and large structure. Also numbers of Selected mode are determined before the procedure. This paper describes the vibration shape of the super-structure model of ship through experimental modal analysis.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.2 no.3
• /
• pp.67-72
• /
• 1988

UPS용 5레벨 PWN인버어터의 디지틀 소프트웨어 제어기법을 개발하였다. 새로운 제어기법을 채용한 5레벨 PWN인버어터는 제어모드 선택에 따라 고조파성분을 쉽게 제거할 수 있었다. 주파수비가 6이고, 변조지수가 1.2∼2.0인 제어모드에서 대부분의 고조파성분이 제거되고 기본파성분이 최대가 되었다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.340-346
• /
• 2000

Traveling wave type semiconductor optical amplifiers integrated with spot-size-converter (SSC-TW-SOA) have been extensively studied for the improvement of coupling effiClency With single-mode fiber and fO! the cost reducClon 111 a packaging In tlIis paper the slructural dependence of the spot-slZe-converter on the effective facet reflectlvllY $R_{eff}$ was experimentally as well as thcoretienlly mvestlgated. It was shown that not only a sufficient mode-conversion in a sse region along the latersl and tran~verse directions but also an introductIOn of angled-facet were very essential in order to reduce $R_{eff}$ Very small ripple less than 0.1 dB in an amplified spontaneous emission spectrum was observed with the fabncated SSC-lW-SOA which consists of the wrndow length of $20\mu\textrm{m}$, facet angle of $7^{\circ}$, and antlrelleetioll-coated facet of ] % reflectivity.tivity.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.35-44
• /
• 2007

In this study was made the flutter analysis for the export model of Firefly(Bandi-ho), the small canard aircraft. Stiffness model based on internal load generation finite element model was generated. Mass model based on the weight DB for weight control was generated. Aerodynamic model based on Doublet Lattice Method was generated. Preliminary flutter analysis was made. Based on it, major vibration modes are identified and experimentally obtained via the ground vibration test. The obtained normal mode frequencies were used to correlate the finite element model. Flutter analysis was made again and major flutter mechanisms were summarized. The most important flutter root was identified as a coupled root between rigid body roll mode and anti-symmetric wing pitching mode.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.55-55
• /
• 2001

개의 N과 P채널 EEPROM을 이용하여 A/D 변환기를 설계하였다. 프로그래밍 모드에서 EEPROM의 선형적 저장능력을 관찰하기 위해 MOSIS의 1.2㎛ double-poly CMOS 공정을 이용하여 셀이 제작되었다. 그 결과 1.25V와 2V구간에서 10㎷ 미만의 오차 내에서 셀이 선형적으로 프로그램 되는 것을 보았다. 이러한 실험 결과를 이용하여 프로그램 가능한 A/D 변환기의 동작이 Hspice에서 시뮤레이션 되었으며, 그 결과 A/D 변환기가 37㎼의 전력을 소모하고 동작주파수는 333㎒ 정도인 것으로 관찰되었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.268-269
• /
• 2003

삼성전자는 LCD 방식에 이은 3세대 프로젝션 모델로 평가받는 DMD (Digital Micromirror Device) 기술을 채용한 43‘’, 50‘’, 61‘’ DLP (Digital Light Processing) 프로젝션 TV를 개발 시판하고 있다. DMD 기술이란 921,600개의 미세한 거울들이 신호에 따라 반사각도를 조절하며 이미지를 구현하는 기술이다. 삼판식 프로젝션 시스템의 단점을 개선, 경박단소와 저가격화를 위하여 단판식을 이용하는 DLP 프로젝션 TV 의 경우 Red, Green, Blue 로 이뤄진 칼라휠을 회전시킴으로서 DMD 위에 연속적으로 삼색의 영상을 재생하여 색을 분리 합성한다. (중략)

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.281-288
• /
• 2002

It might be true that both experimental and analytic techniques have been developed in the vibration analysis end engineering. It could not be said, however, that the experimental method has been also developed as much as analytic method, such as Finite Element Method One of the reason is that computation time becomes longer and that the solution often diverges depending on the choice of initial value in solving nonlinear equation. The equation in experimental modal analysis is usually composed of the nonlinear term of natural frequency and modal damping ratio, and the linear one of equivalent stiffness. In this study, the nonlinear terms were solved first, and then the linear term was obtained. The experimental modal parameters were estimated, applying the developed experimental modal analysis curve-fitting method to the super-structure model. In addition, the number of modes and modal damping ratio could be easily determined by the developed program with the application of graphical techniques and with easy handling button.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.58-63
• /
• 2010

In this paper, distributed tension observer for R2R process is proposed. The minimal order observer theory is utilized to design the distributed tension observer. The proposed method estimates the tension of a specific sub-process based on the speed and tension information from its adjacent sub-processes. Utilizing its properties, the proposed method can be applied to decentralized control structure. In order to achieve high estimation accuracy, sliding mode technique is also adopted to the proposed method.