• Journal of the Korean Society of Radiology
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2017

The U.S. NRC establishes a radiological criteria with regard to restricted or unrestricted use of nuclear plant site after decommissioning in NUREG-1757. According to this, a nuclear plant site can be released in a restricted way or unrestricted way only if a licensee demonstrates that the dose criteria is fulfilled after the site decontamination and remediation. In order to prove compliance with the radiological criteria of site release, LTP(License Termination Plan) must include the site release criteria, site characterization, final survey plan with major radionuclides and DCGL(Derived Concentration Guideline Levels), etc. Based on the decommissioning case of Rancho Seco nuclear power plant in the United States, this paper analyzed a method of setting the DCGL that can be applied to Kori NPP Unit 1 which will be permanently disabled in 2017.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.84-89
• /
• 2007

In order to guarantee the safety of the facility systems, one of the essential components is information on mechanical properties of materials used for the construction. However, acquisition or accumulation of the mechanical property data in industrial fields is limited because this operation does not yield profit, excepting few materials production companies. Corresponding to the urgent needs and poor economical features, the MOCIE has founded the National Center for Standard Reference Data in the KRISS and also designated the Data Center of Mechanical Properties for Metallic Materials (DCMP) as a principal operating section. The DCMP plays roles of collection, edition and evaluation of the mechanical data and development of reference standards. In this study, several functions of the DCMP and standardization procedures of mechanical properties data will be introduced the prospective of standard reference researches will be discussed based on active feedbacks from industrial fields.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.223-226
• /
• 2013

정확한 움직임 추정 기술은 원본과 가장 유사한 영상의 복원에 효과적이고 압축률에도 중요한 영향을 미친다. 하지만 기존의 전역 탐색 (Full Search) 알고리듬과 Sum of Absolute Difference (SAD)라는 정합 오차 기준은 연산량이 높고 하드웨어 구현시 비효율적이다. 이를 보완하기 위한 1비트 변환 알고리듬은 움직임 벡터의 변화량을 0과 1의 연산으로 나타내는데, 이 알고리듬은 움직임이 많아 픽셀 값의 변화가 심한 블록의 변화량도 0과 1로만 표현한다. 그렇기 때문에 정확한 움직임이 반영되지 않고 그로 인해 낮은 Peak Siganl to Noise Ratio (PSNR)을 가져온다. 이 점을 개선하고자 본 논문에서는 참조블록들의 움직임 벡터를 파악하고 분류하여 선택적으로 움직임의 변화량이 큰 영역은 전역 탐색 알고리듬을, 움직임이 작거나 없는 영역은 1비트 연산을 수행하도록 하여 기존의 알고리듬과 비교하여 Peak Siganl to Noise Ratio (PSNR)측면에서 우수한 성능을 확인할 수 있었다.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.397-408
• /
• 2009

Image training is a very important yet difficult state for automated visual inspection using computers. Because the size of parts for the recently produced PCB (Printed Circuit Board) becomes smaller and circuit patterns gradually become more complex, a difficult and complex training process is becoming a big problem within an industry where development cycle for new products is short and various products must be inspected. This research produced a reference image by using CAD (Gerber) file which becomes a standard for PCB automatic visual inspection. Reference image from a Gerber file guarantees PCB patterns with no defects. Through system implementation and experimentation, Gerber file is used in order to propose a plan which allows an easy training process for PCB automatic visual inspection system.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.868-876
• /
• 1999

In this paper, an efficient automatic video parsing technique on MPEG-compressed video that is fundamental for content-based indexing is described. The proposed method detects scene changes, regardless of IPB picture composition. To detect abrupt changes, the difference measure based on the dc coefficient in I picture and the macroblock reference feature in P and B pictures are utilized. For gradual scene changes, we use the macroblock reference information in P and B pictures. the process of scene change detection can be efficiently handled by extracting necessary data without full decoding of MPEG sequence. The performance of the proposed algorithm is analyzed based on precision and recall. the experimental results verified the effectiveness of the method for detecting scene changes of various MPEG sequences.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.25-31
• /
• 1974

1. Various gluing qualities applying Resorcinol Plyophen #6000 were studied on aiming the strength relationships of laminated woods resulted by single species [poplar (Populus deltoides), larch(Larix leptolepis)], mixed species of (poplar and larch), preservatives, treated poplar the scarf joint with mixed species of poplar and larch and the scarf joint treated with preservatives. 1. 1 On the block shear and on the DVL tension test, the mean wood failure ratio showed an excellent value i.e., above 65% and the tangential strength for larch was higher than that of radial, but it was reversed for poplar as shown in Tables 1 and 2. 1. 2 The lamina treated with Na-PCP reduced slightly the strength but the limited strength allowed for manufacturing laminated wood was not influenced by treating Na-PCP as shown in Tables 3 and 4. 1. 3 The safe scarf ratio in the plane scarf joint was above 1/12 for larch and 1/6 for poplar regard less of the chemical treatment or untreatment as shown in Tables. 5, 6, 7 and 8. 2. In the normal and boiled state, the gluing quality of the laminated wood composed of single[poplar (Populus deltoides), larch (Larix leptolepis)] and double species (poplar and larch) glued with Resorcinol Plyophen #6000 were measured as follow, and also represented the delamination of the same laminated wood. 2.1 The normal block shear strength of the straight and curved laminated wood (in life size) were more than three times of the standards adhesion strength. And, the value of the boiled stock was decreased to one half of the standard shear adhesion strength, but it was more than twice the standard strength for the boiled stock. Thus, it was recognized that the water resistance of the Resorcinol Plyophen #6000 was very high as shown in Tables 9 and 10. 2. 2 The delamination ratio of the straight and curved laminated woods in respect of their composition were decraesed, in turn, in the following order i. e., larch, mixed stock (larch+poplar) and poplar. The maximum value represented by the larch was 3.5% but it was below the limited value as shown in Table 11. 3. The various strengthes i.e., compressive, bending and adhesion obtainted by the straight laminaced wood which were constructed by five plies of single and double species of lamina i. e., larch (Larix leptolepis) and poplar (Populus euramericana), glued with urea resin were shown as follows: 3. 1 If desired a higher strength of architectural laminated wood composed of poplar (P) and larch (L), the combination of the laminas should be arranged as follows, L+P+L+P+L as shown in Table 12. 3.2 The strength of laminated wood composed of laminas which included pith and knots was conside rably decreased than that of clear lamina as shown Table 13. 3.3 The shear strength of the FPL block of the straight laminated wood constructed by the same species which were glued with urea adhesives was more than twice the limited adhesion strength, thus it makes possible to use it for interior constructional stock.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.19 no.2
• /
• pp.85-105
• /
• 2008

The purpose of this study is to provide guidelines and recommendations on the process of planning and designing library space and it also reflects on developments which should be considered when planning new library space. The methodology of estimating library space needs of IFLA, a guide for public library building in New South Wales of Australia, and the recommendations for academic libraries in French were analysed. The results given throughout theses guidelines and recommendations are able to develop the guide for public library space in Korea. The guide suggested defines six broad types of library space; collection area, readers and library users, library staff, conference, meeting and cultural space, mechanical and support services, additional services areas. It is import to remember however that each library building and the service it provides is unique and should reflect the needs and aspiration of its community.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.11a
• /
• pp.127-130
• /
• 2008

본 논문에서는 아날로그 TV에서 사용되는 인터레이스 영상을 디지털 디바이스에서 보다 우수하게 출력하기 위해 새로운 디인터레이싱 알고리듬을 제안 한다. 기존의 에지 기반의 라인 평균 방법의 경우 제한된 방향의 화소단위 상관도를 이용하기 때문에 잡음과 계조도 변화에 취약하였다. 또한 공간적 방향 벡터를 사용한 DOI방법은 영상 내 수평 에지가 강한 영역을 보간하는데 우수하지만 좌우 넓은 검색 영역으로 인한 잡음에 취약한 단점이 있었다. ED4D는 에지기반 라인 평균 방법과 공간적 방향 벡터를 적절히 사용하여 규칙적 에지 특성을 갖는 영역에 대한 에지 방향의 정확도를 높였다. 하지만, 참조 방향 및 화소 보간의 판별 기준이 $3{\times}2$ 윈도우로 고정되어 있기 때문에 초기 방향성 판단 기준과 수평 방향 에지 검출에 있어 정밀도가 떨어지는 문제점을 안고 있다. 제안하는 방법은 기존에 사용하던 $3{\times}2$ 윈도우에 $5{\times}2$ 윈도우를 추가적으로 적용하여 초기 방향성 판단 기준을 더 섬세하게 하였으며, 변형된 공간적 방향 벡터를 사용하여 넓은 검색영역으로 인한 잡음의 간섭을 줄였다. 실험결과를 통하여 제안한 방법이 기존의 방법에 비해 주관적 화질뿐만 아니라 객관적인 성능도 우수함을 알 수 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.69-76
• /
• 1995

This study is the 3-D precision deformation measurement of a bridge, obtain results of precision control points by GPS and 3-D measurement system and develope efficientlty technices which can solve precision 3-D analysis by CRP In the result, we could overcome the problems of former control point measurement in the way of the combination system of GPS and 3-D measurement system to positioning decision of reference points and control points. Then we could symplify old measurement process on the 3-D deformation analysis of a linear structure and complement parted analysis fault of measurement instrument.

• Journal of The Korean Association of Information Education
• /
• v.10 no.1
• /
• pp.67-74
• /
• 2006

This study attempts to analyze fifteen computer textbooks for the first and second grades. The textbooks were analyzed by the following characteristics: goals, contents, and formative evaluation. Evaluation criteria from previous works were selected for advantages and identify the problems. In addition, advice for teachers using these books is proposed. The results of the analyses of current computer textbooks are the following: Firstly, in the area of goals and contents, most textbooks clearly define learning goals for each unit. Secondly, in the area of content, some textbooks have a large volume for first and second grade students, and they do not provide enough integration with other subjects. Finally, they do not provide formative evaluation to achieve for goals.