• The Research Journal of the Costume Culture
• /
• v.28 no.3
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.607-613
• /
• 1989

The chemical equilibria of Ni(II)-tetraamine (tetraamine = 2,12-dimethyl-3,7,11,17-tetraazabicyclo-11,3,1-heptadeca-1(17),2,11,13,15-pentaene) complex ion in water, acetonitrile, acetone and nitromethane were investigated using spectrophotometric method, respectively. The equilibria between low-spin ($D_{4h}$) and high-spin ($O_h$) structures of Ni-tetraamine complex ion were presented in water, acetonitrile and acetone, but not in nitromethane. The eqilibrium constants, the reaction enthalpies and the reaction entropies were determined from analysis of the temperature dependence of the electronic spectra. The formation of the triplet species ($O_h$) was found to be exothermic. The solvent and electrolyte effects on the equilibrium constants could be explained by the dielectric constants of solvents and the reaction entropies.

• Science of Emotion and Sensibility
• /
• v.9 no.4
• /
• pp.377-383
• /
• 2006

The purpose of this research is to develop a design model of a smart jacket incorporating MP3 functionality for commercial use, as one of the digital lines of textile to apply If technology. In order to conduct this study, the previous studies were analyzed and usability and wearability tests were conducted using five prototype design models of smart wear with MP3 functionality. Accordingly, the smart jacket incorporating MP3 functionality for commercial use, for which user-centered interface, usability and wearability were completed, was developed by optimizing the design and location of the input interface, control module, the path of wires and earphone etc., based on textile wire and keypad. The smart jacket targets the female dress market from late-teens to early twenties. It will be a high value commodity considers all aspects of recent fashion trends, consumers' emotional satisfaction and the value of digital wear.

• Journal of Fashion Business
• /
• v.21 no.5
• /
• pp.91-108
• /
• 2017

Interests in 3D virtual clothing technology and its application in online shopping malls are increasing with the advent of the Fourth Industrial Revolution. Most studies on 3D virtual clothing, however, are focused on observing drapes or ease of virtual clothing depending on fabric properties of representative clothing items. Therefore, the purpose of this study is: first, to determine if current input of typical material characteristics in 3D CLO are sufficient to formulate virtual skirts with different front and back silhouettes; second, to determine if subjective appearance evaluation matched physical shape characteristics of those skirts. In this study, appearances of typical cotton, wool, silk, rayon, and polyester skirts with different front and back pattern were compared between actual and virtual clothing depending on fabric materials. Subjective appearance evaluation was conducted by 7 experts regarding similarity between actual and virtual clothing with a 5-point scale. For objective evaluation of the both types of skirt shape, degree of roundness at the cross section, displacement of side seam, position of back waistline, and the number of folds at the skirt back were observed. In the case of cotton and wool, not the subjective appearance evaluation as well as shape characteristics of virtual skirts were well matched to the actual shape of skirts with a few material inputs. However, current material inputs for silk, rayon and polyester were insufficient to cover material differences in formation of virtual skirts with different front and back silhouettes.

• Fashion & Textile Research Journal
• /
• v.19 no.1
• /
• pp.90-100
• /
• 2017

In this research, consumer awareness investigation and wearing test were carried out for obtaining useful data on the development of thermo-sensitive functional clothing material. A survey involved 216 people in Seoul and Kyeonggi-do, and 200 questionnaires data were analyzed by descriptive statistics and frequency using SPSS 17.0. Four healthy men in twenties were participated for wearing test. Subjects in normal loungewear were exposed to temperature change from the initial temperature $30^{\circ}C$ down to $5^{\circ}C$ for an hour in a climate chamber. The environmental temperature, surface temperature of garment and skin were measured. As a result, most of respondents have all season clothing products such as underwear, hosiery, and jogging suit for loungewear. Also, thermo regulator y functional clothes are frequently used as underwear and sweat shirt. The consumer awareness investigation on thermo regulatory functional clothing showed that the most important key buying factor is quick climate temperature response, easy maintenance, design and cost, in that order. Surface temperature of garment went down with the cooling down of environmental temperature. The lower environmental temperature, the greater temperature difference by body part showed. Skin temperature change by environmental temperature showed similar tendency of garment surface temperature. In comparison between garment surface and body skin, temperature difference became larger under the lower environmental temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.5
• /
• pp.821-833
• /
• 2008

The purpose of this study is to provide basic information about body proportion characteristics, and the level of body cathexis and fit satisfaction related to those characteristics. It is hoped that this will help to improve ready-to-wear satisfaction in middle-aged women. In order to achieve this purpose, the body proportion characteristics of middle-aged women were measured and were compared with that of standard and ideal body types. Then, the body cathexis and fit satisfaction according to these characteristics was analyzed. Finally, the following results were obtained. First, the average height of middle-aged women was 6.87 head, waist length was 58.9% of height, and knee length was 25.6% of height. In frontal appearance, the hip width, shoulder width, and chest width were wider than waist width(24%, 20%, and 11% respectively). Chest and hip depths was thicker than waist depth(19% and 17% respectively). Second, in lengths proportion, their lower body was shorter than the standard body shape for women in their 20s'. Also the difference between the width of frontal appearance and depth proportion of side appearance was small, suggesting a more slender silhouette among the middle aged women. Finally, middle-aged women who were not wide or big in the chest had higher satisfaction with their bodies. As shoulder width and chest depth became small, the fit satisfaction of upper clothes increased. While longer lower body had higher fit satisfaction with pants crotch, shorter lower body had higher fit satisfaction with waist and abdominal parts.

• Journal of Embryo Transfer
• /
• v.21 no.1
• /
• pp.29-34
• /
• 2006

본 연구는 개 체외성숙 난자를 안정적으로 생산하기 위하여 채취시기, 난구세포 부착 여부 및 배양액에 EGF와 호르몬을 첨가 후 배양했을 때 체외성숙율에 미치는 영향을 조사하였다. 1. 미성숙 난포란을 TCM-199 배양액에서 24, 45시간 배양했을 때 체외성숙율은 각각 7.93%, 8.94%로서 48시간 배양했을 때 가장 높은 체외성숙율을 나타냈다. 2. 휴지기, 난포기, 황체기에 채취한 난소로부터 회수한 난자를 20 ng/ml의 EGF가 첨가된 TCM-199 배양액에서 배양했을 때 체외성숙율은 14.3%로서 0, 10 ng/ml의 EGF 첨가군(3.1%, 7.5%)에 비해 높은 체외성숙율을 나타냈다. 3. 난구세포 부착 및 미부착 난자를 48시간 배양했을 때 체외성숙율은 각각 18.8% 및 7.5%로서 난구세포 부착 난자가 미부착 난자보다 높은 체외성숙율을 나타냈다. 4. 난자의 체외성숙 배양 시 0.5 mg/ml FSH, 5 mg/ml LH, 1 mg/ml $E_2$와 FSH+LH, $FSH+LH+E_2$를 첨가한 TCM-199 배양액에서 배양했을 때 체외성숙율은 각각 1.2%, 10.0%, 2.0%와 10.0%, 31.2%로서 호르몬의 병용처리군이 높은 체외성숙율을 나타냈다. 5. 난자의 체외성숙 배양 시 EGF와 FSH, LH, $E_2$ 및 EGF와 FSH+LH, $FSH+LH+E_2$를 첨가한 TCM-199 배양액에서 배양했을 때 체외성숙율은 32.3%, 27.0%, 3.0%와 36.2%, 69.4%로서 EGF와 호르몬 병용 처리군이 높은 체외성숙율을 나타냈다.

• Journal of Fashion Business
• /
• v.9 no.4
• /
• pp.145-160
• /
• 2005

On the subjects of the female adults in their 20s who love to wear jeans, the wearing reality of basic jean pants and engineered jean pants was examined while pattern comparison and the evaluation of appearance and functions were made to reach the following conclusions: 1. Wearing reality of engineered jean pants Among the examined subjects, 74.8% were found out to favor engineered jean pants. Those who have engineered jean pants turned out to pursue well-known brands more than practicality. 2. Pattern comparison analysis of basic jean pants and engineered jean pants Though similar sizes existed in pants tips and belt width, engineered jean pants showed bigger values in waist circumference, crotch circumference, hip circumference, knee circumference, thigh circumference and so on. There were no big differences in the front part except for the items like crotch circumference and crotch length, but engineered jean pants had bigger sizes in the rear part. Engineered jeans in the rear contained the outward curved silhouette of the legs, curved tips, and a dart design instead of a back yoke. 3. Evaluation of appearance and functions In the scores of appearance, basic jean pants were higher at 3.65 in the order of front > side > back. On the contrary, engineered jean pants were excellent in the order of side > back > front. In the items of functions, engineered jean pants were higher at 4.23 in the order of hips > thighs> waist > abdomen > knee > crotch. On the other hand, basic jean pants showed the order of knee > crotch & thighs > abdomen > hips > waist. In every movement, engineered jean pants revealed higher functionality. In particular, the bigger physical movement led to the greater functional differences between the two kinds of jean pants.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.103-120
• /
• 2012

The study aimed to evaluate the appearance of the men's work clothes jumpers developed to suggest the prototype work clothes jumper patterns by using the 3-D clothing simulation technology. The 3-D simulated clothing images considered the upper body features of men in the age range between 20 and 59 in South Korea. A questionnaire survey conducted previously suggested a basic jumper style with shirt collar and snap opening cuffs for the heavy industry workers; and discomforting parts of the work clothes jumper of the subject workers have been referred to for the experimental jumper appearance test. Besides, defining the measurements of men's upper bodies enabled to generate the men's 3-D virtual models representing each age group's average body feature. The significant body measurement factors for men's 3-D body modeling and jumper pattern-making were stature for the height factor; chest, waist and hip circumferences for the circumference factor; waist back, hip and arm lengths and interscye front/back for the length factor; and back neck breadth for the breadth factor and armscye and scye depths for the depth factor. The men's body measurements of 30's were implemented to three experimental jumper pattern-making methods, i.e. the 1st method using the relations based on stature and chest circumference; the 2nd method using the direct body measurements; and the 3rd method adopting the maximum ease amount of given body measurements whether relations or direct measurements except the direct measurement of scye depth. A comparison among the three experimental jumpers' simulated images highlighted that the appropriate ease amount of the jumper gained higher scores in terms of the jumpers' front, side, back and sleeve parts and the total silhouettes. Therefore the 3rd experimental jumper was finally selected for the heavy industry workers.

• Journal of Fashion Business
• /
• v.24 no.4
• /
• pp.63-84
• /
• 2020

It is essential to consider the heavy industrial working environment factors which are regarded as harmful to workers' health and safety and suitable work motion factors for the workers' motion while developing the work clothes for painting workers in the machinery and shipbuilding industries. This study suggests the use of 3D virtual clothing simulations as a solution to protect the human body from hazardous working conditions accompanying the development of painting work clothes and assessing the work motion performance associated with the comfort while workers wear them during the work clothes. The initial aim of the study is to examine a male avatar to run work motions simultaneously within a 3D virtual clothing simulator, secondly, to present the simulation images of coverall type men's painting work clothes with the application of two experimental painting work motions and one control motion to the avatar, and finally, to present the distance analysis images of the painting work clothes and the avatar body and air gap rates through the analysis of cross-sections of the avatar body while wearing the coverall work clothes according to the work motions. The results showed that the distance degree of painting work clothes to the avatar body for each part of the human body when performing painting work motions. Moreover, 3D virtual clothing simulations enabled the creation of a male model avatar to run painting work motions together and the painting work clothes developed were found to be suitable for the painting work motions.