• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.403-416
• /
• 1998

Socket pressure distributions with gait analysis of a trnsfemoral and a transtibial prostheses were measured in order to assess an optimal socket fitting and function. Ankle joint was aligned by the neutral and the dorsi/plantar flexed positions. Compared to dorsi and plantar flexed positions of ankle joint, cadence and walking speed increased with the neutral ankle joint alignment. Other gait parameters were close to the normative data with the neutral ankle joint alignment. For the transfemoral amputee, dorsiflexed alignment of the ankle joint created high pressure on the lateral aspect of the socket, on the other hand, plantarflexed alignment resulted in increased pressure on the medial aspect of the socket. For the transtibial amputee, dorsiflexed alignment of the ankle resulted in high pressure on the antero-lateral aspect of the socket during mid-stance, but apltarflexion of the ankle joint showed slight increases in pressure at the same location in the socket. The present study clearly demonstarted that malalignment of a prosthesis results in localized increasesing pressure within the socket. Proper slignment of the prosthesis is required in order to acquire an appropriate socket-limb interface as well as the proper gait.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.237-245
• /
• 2011

Purpose: The present study was conducted to investigate whether certain repeated physical and/or chemical stimuli added on ophthalmic lenses might induce any changes of the functions of lens coatings. Methods: The changes in lens surface, light transmittance, foggy duration, durability of ophthalmic lenses were determined after the application of tearing-off with tape, rubbing with acetone, soaking in acetone or distilled water of ophthalmic lens (CR-39 material) as physical and/or chemical stimuli. Results: The change of ophthalmic lens surface was detected after soaking in acetone for longer than 30 minutes by observing the lens surface to figure out the functional change of hard coating. The ophthalmic lens soaked in distilled water for 180 minutes showed little functional change of anti-reflection coating as 1% by measuring light transmittance of lens. However, the function of anti-reflection coating was almost disappeared after the ophthalmic lens was soaked in acetone for 60 minutes. The foggy duration of ophthalmic lens soaked in acetone was increased by estimating foggy duration of lens. The lens coating was shown to be defected when the pre-damaged ophthalmic lenses were torn off with tape, rubbed with acetone and soaked in distilled water or acetone by observing pre-damaged lens surface to evaluate its durability. Conclusions: The careful management during ophthalmic lens dispensing or usual eyeglass wearing is needed since the change in ophthalmic lens coatings was shown by repeated physical and/or chemical stimuli.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.155-164
• /
• 2020

In this paper, we proposed the dimensional system and pattern of middle-aged women's rashguard swimwear for breast cancer patients. First, a survey of 37 breast cancer patients was conducted to determine the preferred swimsuit design for breast cancer patients. According to a survey of breast cancer patients, a rashguard swimwear with a low-exposure chest was designed. It has a pocket shape in which the cap is easy to insert and the cap is fixed. Second, we developed a dimensional system for swimsuits for breast cancer patients. Using direct measurement data from Size Korea for 1,625 women aged 30 to 69, 17-sizes for breast cancer patient's swimsuits were set through cross-analysis of major dimensions, with a coverage rate of 74.3%. It also extracted a standard size of bust circ. 90cm, hip circ. 95cm, and trunk circ. 150cm. Third, we developed a pattern for the central size of the swimsuit for breast cancer patients. For this purpose, we first produced the first central size pattern, and then completed the pattern after modifying it through the second and third wearing experiments. Experimental suits were produced at each pattern-making stage to evaluate wearing fit and motion suitability. Finally, the reduction rate of each dimension item for optimal pattern production was obtained, and the lashguard swimwear pattern for breast cancer patients was developed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.543-550
• /
• 2021

Recently, there has been an increase of accidents related to the rise in the use of Personal Mobility Vehicle (PMV). To solve this problem, the National Assembly announced an amendment that restricted the use of PMV to bicycle roads and to prohibited for people under 13 years old to use PMV, but there is no detailed information about travel speed and safety. In this study, a survey was conducted by dividing the group into minors and adults based on the age of obtaining a driver's license to find out the direction of improvement of laws and systems about PMV. Our results showed that adults considered PMV as more dangerous (Adults 5.50, Minors 4.94) and the suggested age for PMV use was lower from minors than adults (Adults 15.70, Minors 13.85). We found that proper travel speed on bicycle roads differed according to the presence of a driveway (Driveway 26.21 km/h, Non-Driveway 23.55 km/h) and minors had higher a travel speed than adults on all types of bicycle road. Also, Helmets for PMV were seen as the most important safety equipment on all types of bicycle road. and the importance of other safety equipment differed according to the presence of a driveway (Driveway Front-Lighting, Non-Driveway Car Horn). Through this study, It proposes that we have to make new regulations about the use of front lights and horns, as well as enforcement measures that differentiate the speed on each bicycle road type as a way to improve the laws and systems for PMV.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.538-545
• /
• 2019

The purpose of this study was to analyze the change of body temperature and pain by application of Gaussian magnetic for the elderly delayed muscle pain. For the purpose, we selected 15 elderly women(age;$69.47{\pm}1.60$) and conducted repeated experiments. The Gaussian magnetic field area was divided into three areas (1000G, 1500G, 2000G). The applying arbitrarily manufactured magnetic field wristbands changes of body heat and pain before and after wearing Gaussian magnetic were measured and collected data were analyzed using SPSS 19.0. To examine the pre-and post-treatment differences by treatment areas, we conducted paired t-test. Group differences and interaction effects were analyzed using two-way ANOVA and Duncan post hoc tests. The significance level was set to ${\alpha}=.05$. The results are as follows. The change of body heat by the Gaussian magnetic field area showed significant differences in all three groups(P<.05). There were also significant differences in the results of group interactions and in the delayed muscle pain scale between groups(P<.05). The area with the largest difference appeared in the area of 1500G field. The 1000G-1500G Gauss field is considered to be the most ideal magnetic field for body heat and muscle pain changes. In conclusion, the Gaussian magnetic field of 1000G-1500G may affect body temperature and muscle pain in the elderly, and may have a significant impact on the quality of life in old age.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.409-417
• /
• 2019

Purpose: Since the implementation of the Chemical Substance Management Act, data on the number of occurrences by annual chemical accident in Korea and the contractor's contract data received from the competent authority were used. After the implementation of the contract reporting system, the contribution to the reduction of chemical accidents is summarized by statistical data. The characteristics of each region, month, type and those of similar industries and human life were compared and analyzed. Method: 4 years of chemical accident statistics from 2015 to 2018 and since 2003, we have used data from the Chemical Safety Clearing-House (CSC), which provides safety information on cases of chemical accidents. Results and Conclusion: The risk of accidents increases as a number of unskilled workers are put into the workplace during the period when the hazardous chemical handling process is temporarily suspended. Through the reporting for awarding a contract, the operators are strengthening the safety management of chemical accidents by educating unskilled workers and wearing personal protective equipment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.175-186
• /
• 2022

A crossed occlusion resulting from the presence of posterior teeth in one arch but no opposing teeth in the opposite arch results in collapse of the vertical dimension. In this case, the patient has a class III malocclusion with crossed occlusion and anterior crossbite. In order to evaluate the proper vertical dimension, provisional denture was used to stabilize the vertical occlusal dimension for 3 months. After, provisional fixed restoration was used for the stabilizing occlusal relationship and aesthetic improvement for lip support. Definitive prosthesis in implants in the mandible and abutments in the maxillary were using Porcelain-fused-to-metal crown (PFM) crown and the maxillary unilateral edentulous area was treated with removable partial dentures. Through this, proper support of the posterior region and normal anterior occlusal relationship were formed, and the patient was able to obtain aesthetically and functionally satisfactory treatment results.

• Journal of Intelligence and Information Systems
• /
• v.29 no.4
• /
• pp.325-345
• /
• 2023

In the rapidly evolving domain of e-commerce, our study presents a cohesive approach to enhance customer satisfaction prediction from online reviews, aligning methodological innovation with practical insights. We integrate the RFE-SHAP feature selection with LDA topic modeling to streamline predictive analytics in e-commerce. This integration facilitates the identification of key features-specifically, narrowing down from an initial set of 28 to an optimal subset of 14 features for the Random Forest algorithm. Our approach strategically mitigates the common issue of overfitting in models with an excess of features, leading to an improved accuracy rate of 84% in our Random Forest model. Central to our analysis is the understanding that certain aspects in review content, such as quality, fit, and durability, play a pivotal role in influencing customer satisfaction, especially in the clothing sector. We delve into explaining how each of these selected features impacts customer satisfaction, providing a comprehensive view of the elements most appreciated by customers. Our research makes significant contributions in two key areas. First, it enhances predictive modeling within the realm of e-commerce analytics by introducing a streamlined, feature-centric approach. This refinement in methodology not only bolsters the accuracy of customer satisfaction predictions but also sets a new standard for handling feature selection in predictive models. Second, the study provides actionable insights for e-commerce platforms, especially those in the clothing sector. By highlighting which aspects of customer reviews-like quality, fit, and durability-most influence satisfaction, we offer a strategic direction for businesses to tailor their products and services.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.69-75
• /
• 2024

This paper proposes an IoT-based indoor autonomous driving system that applies SLAM (Simultaneous Localization And Mapping) and Navigation techniques in a ROS (Robot Operating System) environment based on TurtleBot3. The proposed autonomous driving system can be applied to indoor autonomous wheelchairs and robots. In this study, the operation was verified by applying it to an indoor self-driving wheelchair. The proposed autonomous driving system provides two functions. First, indoor environment information is collected and stored, which allows the wheelchair to recognize obstacles. By performing navigation using the map created through this, the rider can move to the desired location through autonomous driving of the wheelchair. Second, it provides the ability to track and move a specific logo through image recognition using OpenCV. Through this, information services can be received from guides wearing uniforms with the organization's unique logo. The proposed system is expected to provide convenience to passengers by improving mobility, safety, and usability over existing wheelchairs.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.331-342
• /
• 2007

This study focused on developing MP3 smart clothing products and usability evaluation. MP3 smart clothing which was developed in this study contains e-textile keypad and a kit. The kit consists of MP3 Player, remote controller module and ear phone, and are easy to assemble and dismantle. And usability evaluation about MP3 smart Clothing which was developed in this study contains e-textile keypad and a kit. For making the MP3 Smart clothing, e-textile signal line and keypad was developed and a metal connection ring also was manufactured to adhere closely e-textile signal line to keypad. The last products are two kinds of MP3 smart clothing, jacket style of MP3-YSJ(Yonsei Smart Jacket) and safari style of MP3-YSS(Yonsei Smart Safari). Then usability evaluation conducted two times about MP3 smart clothing developed. Usability evaluation is classified by a module evaluation and an item evaluation. The module evaluation measured external appearance, material, a music controller, an ear phone(or a mini speaker) and connector. The item evaluation measured social acceptance, feeling of wearing, utility, easiness of maintenance and safety. The module evaluation described totally positive results in the first usability evaluation about MP3-YSJ 1.0 and MP3-YSS 1.0. The item evaluation shows a lower score in the social acceptance, especially the easiness of connector maintenance and the social acceptance of music-controller in MP3-YSJ 1.0 and MP3-YSS 1.0. The second usability evaluation conducted with improved products by the first usability test results. Results from second item evaluation indicated needs to improve the easiness of connector & music-controller maintenance and the social acceptance of music-controller in MP3-YSJ 2.0. In MP3-YSS 2.0, the easiness of material management and the social acceptance of music controller & connector needed to improvement. In particular, users felt inconvenience in the social acceptance because of e-textile keypad arrangement. To outweigh this disadvantage, further study is needed about keypad interface of the music controller.