• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.352-356
• /
• 2010

In this study, it is discussed how the directional property of the sound lateralization is influenced by proceeding or succeeding tone. The acoustic source applied here is a reference sound which has 0.5 msec interaural time difference(ITD). Based on this reference sound, interfering sounds with five levels of magnitude are applied to the subjects with four kinds of inter-stimuli time intervals(ISI). The interfering sounds are also added as two different types, proceeding tone and succeeding tone. Additionally, in order to investigate a frequency influence, the reference sound and the interfering sounds are generated by using 2kHz, 4 kHz and a white noise. As a result, the influence on lateralization by proceeding tone is lager than that by succeeding tone. It can consider this result as the effect of temporal masking on lateralization. Moreover, there are small differences of masking effect on lateralization by combinations of pure tone. This result shows that the dependency of frequency domain between reference sound and interfering sound is small on the sound lateralization.

• Korean Journal of Weed Science
• /
• v.13 no.1
• /
• pp.62-70
• /
• 1993

There was intraspecific variation in Echinochloa crus-galli var, crus-galli in response to quinclorac, showing that plan height and dry weight of a locally collected barnyardgrass(Chinjupi) from Chinju were 90.5 and 37.8% of the untreated control, while those of a locally collected one(Iripi) from Iri showed 19.1 and 14.4%, respectively. The normal distribution curve was obtained from frequency distribution of 89 rice cultivars as affected by the application rates of quinclorac at 30, 300, and 3,000g ai/ha. Protein patterns(SDS-PAGE) of two barnyardgrasses belonging to E, crus-galli var. crus-galli such as Iripi and Chinjupi were not affected by the quinclorac application, indicating that inhibition of enzyme and/or protein biosynthesis seems to be not the primary action target of quinclorac. Electronmicroscopic observation on the injured leaf of Iripi which is considered as a susceptible one showed prominent membrane disruption. Chuchungbyeo(rice variety) resulted in a greater inhibition of tomato growth than those from Chinjupi or Iripi, indicating a great amount of quinclorac discharged from rice root, Chinjupi which is relatively tolerant to quinclorac than Iripi, discharged more quinclorac causing a greater inhibition of tomato growth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.303-308
• /
• 2012

One dimensional line edge detection sensor was investigated for the application to detect line or edge of wide sheet winding to cylindrical roller. Line edge detection sensor was realized using align-free 1:1 optical system having 1 convex lens and by processing sum or difference of signals from two photo-diodes in a bi-cell photodetector. Line width up to 0.1mm on object having various materials and colors was detectable, and the deviation of wound sheet was found to be under 0.2mm.

• Electronics and Telecommunications Trends
• /
• v.27 no.1
• /
• pp.1-18
• /
• 2012

미래 사회는 나노기술(NT)을 바탕으로 IT-ET-BT 기술이 융합된 유비쿼터스 사회로 진화하고 있으며, 미래 산업 사회로의 전환을 위해서는 성능개선이 아닌 성능한계 돌파의 패러다임 전환이 가능한 임계성능의 나노 소재/신소자의 개발이 절실히 요구되고 있다. 또한 차세대 단말기는 휴대성의 편리함, 융복합화/다기능화, 인간 친화형이 요구되고, flexible/stretchable/bendable한 형태로 발전하고 있는 상황이다. 나노 피에조트로닉스(nanopiezotronics) 기술은 역학적 에너지를 전기적 에너지로 변환하는 나노 발전 소자(nanogenerator)의 원리를 기반으로 하며 나노선, 나노벨트와 같은 1차원적 나노구조 소재의 압전성과 반전도성이 결합된 특성을 이용한 신기능의 미래 IT 융합 나노 전자/에너지 소자를 구현하는 기술로서 미래 유망 기술로 부각되고 있다. 현재 기술 수준은 압전 전계 효과 트랜지스터, 압전-다이오드, 압전 센서, 압전 나노 발전 소자 등과 같은 prototype 소자를 제작하는 수준에 머무르고 있으나 향후 초고감도 압전 센서, 자가발전 MEMS/NEMS 및 나노 시스템, 스마트 웨어러블 시스템, 건강 모니터링 시스템, 인체 삽입형 소자, portable 및 투명 유연 전자소자 등의 다양한 미래 융합 나노 소자 및 시스템에 광범위한 활용이 가능하며, 향후 신기능의 소자/부품/시스템 창출을 위한 기술로 자리매김할 것으로 전망된다. 본고에서는 압전 나노선, 나노튜브, 나노섬유 등의 1차원적 나노구조체 기반의 nanopiezotronics 기술과 최근의 연구결과들을 소개한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.51-57
• /
• 2004

A simple fiber length measurement technique has been demonstrated by using a self-seeding laser oscillation of a Fabry-Perot laser diode. We induced a self-seeding laser oscillation through a closed-loop by adjusting the modulation frequency of a Fabry-Peort laser diode when the output optical pulse of the laser reinjected into the laser after passing through the closed-loop. The length of a fiber-under-test was calculated from the difference between my two modulation frequencies at which self-seeding laser oscillation occurs at a specific mode. We have experimentally confirmed the technique for various fiber lengths from 0.1 km to 75 km. The relative error between the measurement result of the proposed technique and that of a commercial instrument was less than 0.24 %. The repeatability of the proposed technique was better than 0.1 %.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1236-1240
• /
• 1997

The crude extract of Morus alba Linne bark which showed strong antimicrobial activity on Listeria monocytogenes was fractionated by some solvents and applied column chromatography for purification of active component. By silica gel column chromatography, active fraction (F-5') was purely isolated and confirmed their strong bactericidal effect on Listeria monocytogenes tested at level of 100 and 300 ppm in tryptic soy broth. The cell wall observed by SEM was abnormal after treatment of F-5'.

• Composites Research
• /
• v.22 no.3
• /
• pp.74-81
• /
• 2009

Reversed plane bending fatigue tests were conducted on SiC particle reinforced and SiC whisker reinforced aluminum composite. The initiation and growth behaviors of small surface fatigue cracks were continuously monitored by the replica technique and the causes of fracture and fracture mechanism were investigated by SEM. The relationship between da/dn and $K_{max}$ show that da/dn increases in high stress level while decrease and again increases with increasing of $K_{max}$ in low stress level for two materials.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1810-1815
• /
• 2000

발전기 회전자와 고정자 사이에 유기되는 전자력은 발전기 운전중 진동 피로 현상을 유발시켜 발전기 수명 저감의 요인이 된다. 특히 고정자 코어부에 비해 기계적 구속력이 비교적 약한 권선 단말부에서의 진동은 냉각수 누수, 권선 마멸등에 의한 2차 사고를 유발시킬수 있다. 따라서 본 논문에서는 국내 발전소에서 운전중인 발전기를 중심으로 수행한 제작사별 고정자 권선의 진동 특성을 비교 분석하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.1
• /
• pp.20-25
• /
• 2012

Gender differences have been studied by using spectral features such as median frequency (MDF) respectively. MDF is the most commonly used as a feature to describe muscle conduction velocity. The aim of this paper is to detect gender differences from surface EMG signals during isotonic contractions of the bicep Brachii. Eight volunteers participated in surface EMG recordings placed on the biceps brachii and each recording experiment continued until their exhaustion. We used feature values and regressive slopes and compared the feature changes from the onset to the endurance time to find gender differences. The result of experiments shows that the regressive slope of these features is valid to measure gender differences.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.31-36
• /
• 2002

The 2nd level solder joint reliability of 153 FC-BGA for high-speed SRAM (Static Random Access Memory) with the large chip on laminate substrate comparing to PBGA(Plastic Ball Grid Array) was studied in this paper. This work has been done to understand an influence as the mounting with single side or double sides, structure of package, properties of underfill, properties and thickness of substrate and size of solder ball on the thermal cycling test. It was confirmed that thickness of BT(bismaleimide tiazine) substrate increased from 0.95 mm to 1.20 mm and solder joint fatigue life improved about 30% in the underfill with the low young's modulus. And resistance against the solder ball crack became twice with an increase of the solder ball size from 0.76 mm to 0.89 mm in solder joints.