• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.198-203
• /
• 2001

This paper discusses an experimental method for measuring the insertion loss (IL) performance of a double panel that are used in vehicles. Instead of two adjacent reverberation chambers which are generally used to measure the transmission loss (TL) of the large sound isolation materials, air-borne sound insulation tester was utilized to determine the IL and articulation index (AI) of standardized deadening materials. In comparison to reverberation chamber method, air-borne sound insulation tester method is more space-saving, more time-saving and more simple to the automotive acoustics. From the empirical results, it is verified that the performance of deadening materials is closely connected with thickness of panels, type of filling material that is filled into a double panel, and area ratio of double panel.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.892-897
• /
• 2003

This study deals with the performance of a simplified test apparatus for measurement of sound insulation of panels. In order to investigate its performance, results from experiment and theory of the sound transmission loss for single and double panels are compared. Comparative results show that in evaluation of the sound insulation performance, the test apparatus has a cumbersome problem at the low frequency region, i.e. below 315 ㎐, presumably because of the poor diffuse sound field in the chambers. Meanwhile at the high frequency, it shows a considerable results comparable to the theoretical prediction. One of the objective of this study that compares measured results between a real reverberation chamber and a simplified test apparatus, by using a specimen of a sandwich panel. It shows qualitatively resonable agreement from which one can find a potential to provide a design tool.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.174-177
• /
• 2003

Comparisons of measuring apparatus for sound insulation are made between a reverberation chamber and a simplified test apparatus(APAMAT II) that is used to measure sound insulation performance of inner panels for automobiles. Also, theoretical prediction by using sandwich model are made in order to compare it with experiments and to consequently provide a design tool. Comparative results show that steel ball excitation in APAMAT II has a serious problem with sound insulation performance at the low frequency region, while speaker excitation gives a good agreements with theoretical prediction.

• 한국음향학회지
• /
• 제42권4호
• /
• pp.285-297
• /
• 2023

본 연구의 목적은 대한민국 학교 교실 중 학교공간혁신사업을 통해 도입된 9세 이하 초등학생이 사용하는 1, 2학년 창의융합교실의 음향성능을 조사하는 것이다. 이를 위해 창의융합교실 3개를 대상으로 음향성능을 측정하였다. 측정된 음향인자는 배경소음, 잔향시간(Reverberation Time, RT), 음성명료도(D₅₀), 음성전달지수(Speech Transmission Index, STI) 및 양이간 상호상관도(Inter-Aural Cross Correlation, IACC)였다. 또한 벽체의 차음성능분석을 위해 투과손실(Transmission Loss, TL), 표준화음압레벨차(D_nT) 등을 측정하였고, 교실의 문과 창문의 개폐 여부에 따른 소음레벨을 측정하였다. 그 결과, 배경소음은 공조기를 가동하지 않았을 때 평균 28.0 dB(A) ~ 32.8 dB(A)로 나타났으며 잔향시간은 0.6 s를 초과하지 않았다. 다양한 책상 배치에 따라 양이간 상호상관도(IACC)에 차이가 나타났는데, 중심선과 음원 근처 좌석에서 IACC 값이 높게 나타났다. 특히 음원을 정면으로 바라보는 중심선의 좌석에서 더 높은 IACC가 측정되었다. 문과 창문의 개폐에 따른 교실 내 소음레벨은 모든 창문과 문을 열었을 때와 복도측 창문과 문을 열었을 때 기준을 초과하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1234-1237
• /
• 2002

When measuring sound transmission loss (STL) in a laboratory, the specimen location in test aperture affects considerably the measuring accuracy through the influence of so-called “tunneling effect” In this paper, for a single panel and a double panel with air cavity, experimental STL evaluations on various specimen locations on test aperture were carried out to explain the phenomenon. It is shown that the difference of STL is more than 2dB especially at the low frequency region and the case of the center-located panel yielded the lower STL than that of flushing with the end of tunnel, which confirms that the tunneling effect plays an important role in STL measurement.