• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.3
• /
• pp.133-149
• /
• 2021

This study aims to report the behavioral mechanism of steel pipe reinforcement grouting, which is being actively used to ensure the stability of the excavation surface during tunnel excavation, based on measurements taken at the actual site. After using a 12 m steel pipe attached with a shape displacement meter and a strain gauge to reinforce the actual tunnel surface, behavioral characteristics were identified by analyzing the measured deformation and stress of the steel pipe. Taking into account that the steel pipes were overlapped every 6 m, the measured data up to 7 m of excavation were used. In addition, the behavioral characteristics of the steel pipe reinforcement according to the difference in strength were also examined by applying steel pipes with different allowable stresses (SGT275 and SGT550). As a result of analyzing the behavior of steel pipes for 7 hours after the first excavation for 1 m and before proceeding with the next excavation, the stress redistribution due to the arching effect caused by the excavation relaxation load was observed. As excavation proceeded by 1 m, the excavated section exhibited the greatest deformation during excavation of 4 to 6 m due to the stress distribution of the three-dimensional relaxation load, and deformation and stress were generated in the steel pipe installed in the ground ahead of the tunnel face. As a result of comparing the behavior of SGT275 steel pipe (yield strength 275 MPa) and SGT550 steel pipe (yield strength 550 MPa), the difference in the amount of deformation was up to 18 times and the stress was up to 12 times; the stronger the steel pipe, the better it was at responding to the relaxation load. In this study, the behavior mechanism of steel pipe reinforcement grouting in response to the arching effect due to the relaxation load was identified based on the measured data during the actual tunnel excavation, and the results were reported.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.60-77
• /
• 2020

An assumption can be made that, as a start point for the recognition and utilization of cultural heritage, the "choice" of such would reflect the cultural ideology of the ruling power at that time. This has finally been proved by the case of Korea in the 20th century. First, in the late Korean Empire (1901-1910), the prevailing cultural ideology had been inherited from the Joseon Dynasty. The main objects that the Joseon Dynasty tried to protect were royal tombs and archives. During this time, an investigation by the Japanese into Korean historic sites began in earnest. Stung by this, enlightened intellectuals attempted to recognize them as constituting independent cultural heritage, but these attempts failed to be institutionalized. During the 1910-1945 Japanese occupation, the Japanese led investigations to institutionalize Korean cultural heritage, which formed the beginning of the current cultural heritage management system. At that time, the historical investigation, designation, protection, and enhancement activities led by the Japanese Government-General of Korea not only rationalized their colonial occupation of Korea but also illustrated their colonial perspective. Korean nationalists processed the campaign for the love of historical remains on an enlightening level, but they had their limits in that the campaign had been based on the outcome of research planned by the Japanese. During the 1945-2000 period following liberation from Japan, cultural heritage restoration projects took places that were based on nationalist ideology. People intended to consolidate the regime's legitimacy through these projects, and the enactment of the 'Cultural Heritage Charter' in 1997 represented an ideology in itself that stretched beyond a means of promoting nationalist ideology. During the past 20 centuries, cultural heritage content changed depending on the whims of those with political power. Such choices reflected the cultural ideology that the powers at any given time held with regard to cultural heritage. In the background of this cultural heritage choice mechanism, there have been working trade-off relationships formed between terminology and society, as well as the ideological characteristics of collective memories. The ruling party has tried to implant their ideology on their subjects, and we could consider that it wanted to achieve this by being involved in collective memories related to traditional culture, so called-choice, and utilization of cultural heritage.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.42-51
• /
• 2020

This study was performed to support the 6th forest basic planning by Korea Forest Service as predicting the change of forestland area by the transition of land use type in the future over 35 years in South Korea. It is very important to analyze upcoming forestland area change for future forest planning because forestland plays a basic role to predict forest resources change for afforestation, production and management in the future. Therefore, the transitional interaction between land use types in future of South Korea was predicted in this study using econometrical models based on past trend data of land use type and related variables. The econometrical model based on maximum discounted profits theory for land use type determination was used to estimate total quantitative change by forestland, agricultural land and urban area at national scale using explanatory variables such as forestry value added, agricultural income and population during over 46 years. In result, it was analyzed that forestland area would decrease continuously at approximately 29,000 ha by 2027 while urban area increases in South Korea. However, it was predicted that the forestland area would be started to increase gradually at 170,000 ha by 2050 because urban area was reduced according to population decrement from 2032 in South Korea. We could find out that the increment of forestland would be attributed to social problems such as urban hollowing and localities extinction phenomenon by steep decrement of population from 2032. The decrement and increment of forestland by unbalanced population immigration to major cities and migration to localities might cause many social and economic problems against national sustainable development, so that future strategies and policies for forestland should be established considering such future change trends of land use type for balanced development and reasonable forestland use and conservation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.254-261
• /
• 2020

Purpose: The purpose of this study was to assess the marginal and internal fit of interim crowns fabricated by two different manufacturing method (subtractive manufacturing technology and additive manufacturing technology). Materials and Methods: Forty study models were fabricated with plasters by making an impression of a master model of the maxillary right first molar for ceramic crown. On each study model, interim crowns (n = 40) were fabricated using three types of 3D printers (Meg-printer 2; Megagen, Zenith U; Dentis, and Zenith D; Dentis) and one type milling machine (imes-icore 450i; imes-icore GmbH). The internal of the interim crowns were filled with silicon and fitted to the study model. Internal scan data was obtained using an intraoral scanner. The fit of interim crowns were evaluated in the margin, absolute margin, axial, cusp, and occlusal area by using the superimposition of 3D scan data (Geomagic control X; 3D Systems). The Kruskal-wallis test, Mann-Whitney U test and Bonferroni correction method were used to compare the results among groups (α = 0.05). Results: There was no significant difference in the absolute marginal discrepancy of the temporary crown manufactured by three 3D printers and one milling machine (P = 0.812). There was a significant difference between the milling machine and the 3D printer in the axial and occlusal area (P < 0.001). The temporary crown with the milling machine showed smaller axial gap and higher occlusal gap than 3D printer. Conclusion: Since the marginal fit of the temporary crown produced by three types of 3D printers were all with in clinically acceptable range (< 120 ㎛), it can be sufficiently used for the fabrication of the temporary crown.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2021

To investigate the effect of freshwater discharge on the seawater circulation in the semi-closed harbor, a 3-D hydrodynamic model was applied to the International Ferry Terminal (IFT). The model run is conducted for 45 days (from May 15 to June 30, 2020), and the reproducibility of the model for time-spatial variability of current velocity and salinity was verified by comparison with model results and observation data. There are two sources of freshwater towards inside of the IFT: Han River and water reservoir located in the eastern part of IFT. In residual current velocity results, the two-layer circulation (the seaward flow near surface and the landward flow near bottom)derived from the horizontal salinity gradient in only considering the discharge from a Han River is more developed than that considering both the Han River and water reservoir. This suggests that the impact of freshwater from the reservoir is greater in the IFT areas than that from a Han River. Additionally, the two-layer circulation is stronger in the IFT located in southern part than Incheon South Port located in northern part. This process is formed by the interaction between tidal current propagating into the port and freshwater discharge from a water reservoir, and flow with a low salinity (near 0 psu) is delivered into the IFT. This low salinity distribution reinforces the horizontal stratification in front of the IFT, and maintains a two-layer circulation. Therefore, local sources of freshwater input are considered to estimate for mass transport process associated with the seawater circulation within the harbor and It is necessary to perform a numerical model according to the real-time freshwater flow rate discharged.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.67-79
• /
• 2020

This study analyzed the start-up education curriculum and start-up education programs of seven universities in the U.S. to find out what courses are provided, what various programs exist, and what the characteristics of start-up education in each university are. California State University, San Bernardino / University of California, Irvine / Drexel University / Oklahoma State University / Florida State University / San Diego State University / University of Southern California where entrepreneurship education based on the Entrepreneurship Degree Course is being established based on the Entrepreneurship Center of seven universities in the United States, which is not well introduced in Korea. This study examined how the start-up education courses and start-up support systems at seven universities in the U.S. are progressing at the undergraduate, MBA, master's and doctoral levels, and comparative levels. Through the case studies of the universities presented, the primary analysis was carried out to explore the various characteristics of American university start-up education. The implications of start-up education at American universities in this study are as follows. First, in order for universities to take the initiative in providing start-up education, they should be organized to suit the course of start-up education suitable for the characteristics of universities and introduce support programs. Second, it is necessary to establish an independent center within domestic universities to be operated autonomously. Third, the start-up education of universities should include building university-industry partnerships, operating entrepreneurship degree courses and collaboration between departments of universities. Fourth, the independent center should lead the active participation of alumni and local start-ups and start-up-related programs should be operated based on this. Fifth, Differentiated programs for each university's characteristics should be introduced and applied to universities. Although case studies have limitations that cannot be generalized, they can provide a useful framework. Therefore, it is necessary to design a systematic start-up education that reflects the correct design direction and characteristics of each university.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.260-279
• /
• 2021

The Goguryeo kingdom established a unique defense system centered on a series of mountain fortresses. However, modern-day studies on its defense system have tended to focus on how they were positioned and generally consist of little more than individual surveys or introductions to the relevant materials, leaving much to be desired. This study attempts to extend the scope of studies about fortresses dating back to the Goguryeo period, taking into account the limitations of the available materials. As such, this study reviews the defense system of Goguryeo during the Gungnaeseong Period (i.e., the period when Gungnaeseong was the capital of Goguryeo) using the GIS system, with the focus on fortresses that are thought to have been built in the area extending from the middle and upper reaches of the Amnok River to the mid-stream region of the Liohe River, based on the aforementioned studies. The results of the study are as follows. First, the major roads built during the Gungnaeseong Period were as stated in the foregoing studies to some extent. Researchers believed that during the middle period of the dynasty, a major road ran along the Suzihe, Fuer and Xinkai rivers before finally reaching Jian. The study found that fortified walls and fortress strongholds were built along this road. Second, there were seven fortresses between the middle and upper reaches of the Amnokgang River and the midstream region of the Liaohe River. A primary defense line was closely established between the strongholds and the nearby walls, with secondary and tertiary defense lines established more loosely and encompassing a much wider area. Third, regarding the defense system along the major roads, the Choejinbosanseong, Goisanseong and Cheolbaesanseong fortresses served as strongholds along the 60-kilometer-long primary defense line, with 80-kilometer-long secondary and tertiary defense lines set up behind it. The final 120-kilometer-long defense line of the capital was established along with the Onyeosanseong Fortress, while a stumbling block was set up close to the capital as a defense system, rather than building a fortified wall. To summarize, a primary defense system was established centered on a series of fortresses, with each stronghold maintaining a closely-knit defense system in connection with other nearby strongholds to repel invaders.

• Journal of Korea Water Resources Association
• /
• v.54 no.8
• /
• pp.629-641
• /
• 2021

In this study, a two-dimensional numerical model (Nays2DH) was applied to analyze the process of morphological changes in the river channel bed depending on the changes in the amount of flooding after fully opening the Sejong weir, which was constructed upstream of the Geum River. For this, numerical simulations were performed by assuming the flow conditions, such as a non-uniform flow (NF), unsteady flows (single flood event, SF), and a continuous flood event (CF). Here, in the cases of the SF and CF, the normalized hydrograph was calculated from real flood events, and then the hydrograph was reconfigured by the peak flow discharge according to the scenario, and then it was employed as the flow discharge at the upstream boundary condition. In this study, to quantitatively evaluate the morphological changes, we analyzed the time changes in the bed deformation the bed relief index (BRI), and we compared the aerial photographs of the study area and the numerical simulation results. As simulation results of the NF, when the steady flow discharge increases, the ratio of lower width to depth decreases and the speed of bar migration increases. The BRI initially increases, but the amount of change decreased with time. In addition, when the steady flow discharge increases, the BRI increased. In the case of SF, the speed of bar migration decreased with the change of the flow discharge. In terms of the morphological response to the peak flood discharge, the time lag also indicated. In other words, in the SF, the change of channel bed indicates a phase lag with respect to the hydraulic condition. In the result of numerical simulation of CF, the speed of bar migration depending on the peak flood discharges decreased exponentially despite the repeated flood occurrences. In addition, as in the result of SF, the phase lag indicated, and the speed of bar migration decreased exponentially. The BRI increased with time changes, but the rate of increase in the BRI was modest despite the continuous peak flooding. Through this study, the morphological changes based on the hydrological characteristics of the river were analyzed numerically, and the methodology suggested that a quantitative prediction for the river bed change according to the flow characteristic can be applied to the field.

• Journal of Nutrition and Health
• /
• v.54 no.4
• /
• pp.355-372
• /
• 2021

Purpose: This study aimed to provide baseline data for establishing a sugar reduction policy at coffee shops by analyzing the factors that affect a coffee shop user's perception and behavioral intention of reducing sugar intake. Methods: An online survey was conducted involving 1,274 Daegu citizens aged 19-49 years, who had visited coffee shops within the last month. Results: When visiting a coffee shop, the purchase of sweet drinks was higher in the younger age group, and the addition of syrup or sugar was higher in the older age group. Of the total respondents, 42.1% were aware that some coffee shops accommodate reduced sugar requests, 57.9% perceived the need to reduce sugar in coffee shop beverages and 22.3% had purchased beverages intending to reduce their sugar intake. In addition, 59.7% knew about sugar nutrition labeling, and 68.8% perceived the need for nutrition labeling for sugar. When purchasing beverages, 35.6% checked the nutrition labeling, and 77.2% purchased alternative drinks when the sugar content was high. Guiding the choice of sweetness levels in coffee shop orders was seen to have the highest effectiveness and intention to reduce sugar intake. Moreover, the perceived need to reduce sugar intake had the most positive effect on the behavioral intention to reduce sugars in coffee shop beverages (β = 0.558, p < 0.001). Conclusion: Although the overall awareness and practice of reducing the sugar intake in coffee shop users were low, the behavioral intention to reduce sugars was positive, and this was most affected by the perception of the need to reduce sugars. Therefore, there is a need for differentiated education and promotion for each age group for recognizing the necessity and outlining methods for reducing sugar intake. Furthermore, coffee shops should reflect customer's sugar reduction needs.

• The Journal of the Korea Contents Association
• /
• v.21 no.8
• /
• pp.150-162
• /
• 2021

Companies have recently become increasingly interested in corporate entrepreneurship to establish a core employment policy in order to secure and maintain core employees and to foster an innovation-oriented organizational culture. Therefore, The purpose of this study is to empirically analyze the causal relationship between core employment policies and the team leader's the perceived internal process organizational competency and job satisfaction, and to investigate whether corporate entrepreneurship has a moderation effect. Non-financial service industries including ICT companies were subject of the study and human capital corporate panel(HCCP) was utilized. The samples were 367 team leaders from 79 domestic companies. This study also applied Multi-Level Analysis(HLM), which simultaneously analyzes variables at both the individual level and the organizational level in order to improve the accuracy of the study. According to the result of the study analysis, core employment policies have a positive(+) impact on the perceived internal process organizational competency and job satisfaction. In addition, the moderation effect of corporate entrepreneurship was verified during the process when core employment policies influence the two outcome variables. corporate entrepreneurship was found to have a moderation effect that strengthens the influence on job satisfaction, but the moderation effect on the perceived internal process organizational competency was not statistically significant. These results confirm that organizational cultural factors such as corporate entrepreneurship are important influence variables in the process of influencing individual-level variables such as core employment policies. Academically, It suggests that in order to enhance the effectiveness of company strategies in respect of human resource management such as core employment policies, it is important to foster a cultural environment that suits the industry and characteristics of the organization. In addition, it suggested that companies in need of new innovation need to utilize corporate entrepreneurship.