• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.136-138
• /
• 2022

Edge detection includes information such as the shape, position, size, and material of an object with respect to an image, and is a very important factor in analyzing the characteristics of the image. Existing edge detection methods include Sobel edge detection filter, Roberts edge detection filter, Prewitt edge detection filter, and LoG (Lapacian of Gaussian) using secondary differentials. However, these methods have a disadvantage in that the edge detection results are somewhat insufficient because a fixed weight mask is applied to the entire image area. Therefore, in this paper, we propose an edge detection algorithm that increases edge detection characteristics by considering the center pixel in the mask. In addition, in order to confirm the proposed edge detection performance, it was compared through simulation result images.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.50-50
• /
• 2019

최근 국지성 호우 및 하천 제방의 노후화로 인한 제방 붕괴 피해가 빈번히 발생하면서 제방의 안정성 및 표면 보강을 위한 다양한 연구가 시도되고 있다. 본 연구에서는 제방 붕괴에 따른 피해 최소화 및 대책을 수립하기 위한 방법으로 시멘트와 같은 지구온난화를 야기시키는 물질이 아닌 친환경 신소재 바이오폴리머를 흙과 혼합한 재료를 활용하여 제방의 내구성을 강화하기 위한 연구가 수행되고 있다. 이에 안동하천실증연구센터에서는 현장토를 사용하여 높이 1 m, 폭 3 m, 사면경사 1 : 2, 총 길이 5 m 의 중규모 제방모형을 제작하였으며, 공동연구기관인 카이스트에서 개발된 바이오폴리머와 흙을 적정 비율로 혼합한 바이오-소일을 제방 전면에 일정 두께로 피복하여 월류 발생에 따른 제방 안정성 평가 실험을 수행하였다. 1차 실험은 흙 제방 조건이며, 2 3차 실험은 제방 표면에 5 cm 두께로 신소재가 피복된 조건으로 안정된 결과 도출을 위해 반복 실험을 수행하였다. 제방 천단면 및 사면에서의 유속분포를 측정하기 위해 드론 및 비디오카메라를 활용한 LSPIV 기법을 적용하여 실험조건에 따른 표면유속과 월류 흐름이 제방 붕괴에 미치는 영향에 대해 비교분석하였다. 또한 그래픽 소프트웨어를 이용한 픽셀기반 영상분석 기법을 적용하여 시간에 따른 제방사면의 붕괴면적을 산정하여 신소재 피복에 따른 붕괴 지연효과 분석을 통한 신소재 활용 제방의 현장 적용가능성 및 안정성을 평가하였다. 본 연구결과, 흙 제방의 경우 월류 흐름 발생 직후 침식현상이 전개되어 유속분포가 집중되고 있었으며, 이후 발생하는 강한 수직흐름으로 인해 입자추적을 통한 분석이 더 이상 불가능하였다. 신소재 제방의 경우 월류 흐름 발생 직후 침식은 발생하지 않았으며 일정시간동안 유속분포가 유지되었다. 지속적인 월류 흐름으로 인해 제방 끝단에서 침식이 발생하였으며 이때 최대 유속은 3.3 m/s 로 나타났다. 또한 픽셀기반 분석을 통해 30초 단위로 표면손실률을 산정한 결과, 신소재 활용 제방(2, 3차)의 경우 같은 실험조건에도 불구하고 최종 붕괴시간은 약 3배의 차이를 보였으며, 양생 과정에서의 크랙 발생을 최소화한다면 월류 발생 시 상당한 붕괴지연효과가 있는 것으로 판단된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2010년도 춘계학술발표대회
• /
• pp.490-493
• /
• 2010

오늘날 사회생활을 하는데 있어 대인관계는 원만한 조직의 운영에 필수적인 요소가 되고 있다. 그러나, 상대방의 성격을 잘 알지 못하거나 잘못 파악하여 실수하는 경우가 종종 일어난다. 이러한 문제를 해결하기 위해 본 논문에서는 영상공학적 기술을 이용하여 손톱 모양 및 크기에 따라 개인마다 보유하고 있는 성격의 특징을 연구하였다. 이를 위해 입력 영상에서 이진화 작업을 통해 1차 영상을 수집하고 필터링 및 스캐닝 작업을 통해 최종적으로 손톱의 영역을 추출하고 크기를 측정하는 방법을 사용하였다. 이를 기반으로 결과 영상 및 손톱의 수치값을 측정하고 손톱의 크기를 비교, 분석하였다. 결과적으로 실험값을 통해 손톱의 형태 및 크기를 비교, 분석하였으며 손톱의 크기에 따른 개인의 성격에 대해 분석하였다.

• The Journal of Korean Society for Radiation Therapy
• /
• 제26권1호
• /
• pp.59-67
• /
• 2014

Purpose : This study aims to evaluate 3D dosimetric impact for MIP image and each phase image in stereotactic body radiotherapy (SBRT) for lung cancer using volumetric modulated arc therapy (VMAT). Materials and Methods : For each of 5 patients with non-small-cell pulmonary tumors, a respiration-correlated four-dimensional computed tomography (4DCT) study was performed. We obtain ten 3D CT images corresponding to phases of a breathing cycle. Treatment plans were generated using MIP CT image and each phases 3D CT. We performed the dose verification of the TPS with use of the Ion chamber and COMPASS. The dose distribution that were 3D reconstructed using MIP CT image compared with dose distribution on the corresponding phase of the 4D CT data. Results : Gamma evaluation was performed to evaluate the accuracy of dose delivery for MIP CT data and 4D CT data of 5 patients. The average percentage of points passing the gamma criteria of 2 mm/2% about 99%. The average Homogeneity Index difference between MIP and each 3D data of patient dose was 0.03~0.04. The average difference between PTV maximum dose was 3.30 cGy, The average different Spinal Coad dose was 3.30 cGy, The average of difference with $V_{20}$, $V_{10}$, $V_5$ of Lung was -0.04%~2.32%. The average Homogeneity Index difference between MIP and each phase 3d data of all patient was -0.03~0.03. The average PTV maximum dose difference was minimum for 10% phase and maximum for 70% phase. The average Spain cord maximum dose difference was minimum for 0% phase and maximum for 50% phase. The average difference of $V_{20}$, $V_{10}$, $V_5$ of Lung show bo certain trend. Conclusion : There is no tendency of dose difference between MIP with 3D CT data of each phase. But there are appreciable difference for specific phase. It is need to study about patient group which has similar tumor location and breathing motion. Then we compare with dose distribution for each phase 3D image data or MIP image data. we will determine appropriate image data for treatment plan.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제27권4호
• /
• pp.453-460
• /
• 2009

For constructing 3D information using aerial photograph or video sequences, left and right stereo images having different viewing angle should be prepared in overlapping area. In video sequences, left and right stereo images would be generated by mosaicing left and right slice images extracted in consecutive video sequences. Therefore, this paper is focused on generating left and right stereo mosaic images that are able to construct 3D information and video sequences could be made for the best use. In the stereo mosaic generation, motion parameters between video sequences should be firstly determined. In this paper, to determine motion parameters, free mosaic method using geometric relationship, such as relative orientation parameters, between consecutive frame images without GPS/INS geo-data have applied. After determining the motion parameters, the mosaic image have generated by 4 step processes: image registration, image slicing, determining on stitching line, and 3D image mosaicking. As the result of experiment, generated stereo mosaic image and analyzed result of x, y-parallax have showed.

• Korean Journal of Remote Sensing
• /
• 제17권1호
• /
• pp.33-44
• /
• 2001

The paper presents several satellite models and satellite image decomposition methods for inaccessible area where ground control points can hardly acquired in conventional ways. First, 10 different satellite sensor models, which were extended from collinearity condition equations, were developed and then behavior of each sensor model was investigated. Secondly, satellite images were decomposed and also pseudo images were generated. The satellite sensor model extended from collinearity equations was represented by the six exterior orientation parameters in $1^{st}$, $2^{nd}$ and $3^{rd}$ order function of satellite image row. Among them, the rotational angle parameters such as $\omega$(omega) and $\Phi$(phi) correlated highly with positional parameters could be assigned to constant values. For inaccessible area, satellite images were decomposed, which means that two consecutive images were combined as one image, The combined image consists of one satellite image with ground control points and the other without ground control points. In addition, a pseudo image which is an imaginary image, was prepared from one satellite image with ground control points and the other without ground control points. In other words, the pseudo image is an arbitrary image bridging two consecutive images. For the experiments, SPOT satellite images exposed to the similar area in different pass were used. Conclusively, it was found that 10 different satellite sensor models and 5 different decomposed methods delivered different levels of accuracy. Among them, the satellite camera model with 1st order function of image row for positional orientation parameters and rotational angle parameter of kappa, and constant rotational angle parameter omega and phi provided the best 60m maximum error at check point with pseudo images arrangement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제34권4C호
• /
• pp.380-387
• /
• 2009

In this paper, optical image encryption using integral imaging and pixel-scrambling technologies is proposed. In the encryption process, we use pixel scrambling to change the order of subsections into which the cover image is divided, and the utilize the integral imaging scheme to obtain the elemental image from the scrambled image. In order to achieve higher security, we reuse pixel scrambling to the elemental image. In the decryption process, we employ optical integral imaging reconstruction technique and inverse pixel scrambling methode. Computer simulation results prove the feasibility of the proposed method and robustness against data loss and noise.

• The Journal of the Korea Contents Association
• /
• 제18권3호
• /
• pp.205-214
• /
• 2018

As the paradigm of the Fourth Industrial Revolution is expanding, VR devices and their contents industry are drawing more and more attention as the digital devices of the next generation. Of the realms of VR contents, $360^{\circ}$ 3D videos are receiving the most attention in the field of media, and they are being utilized by Google as educational contents. As such, this research analyzes actual condition of use and motivation of using corresponding contents through survey of $360^{\circ}$ 3D video users. Results show that the most utilized platform is Youtube, and the genres which the respondents have used or are willing to use turned out to be Games and Movies.

• Journal of the Korean Society of Radiology
• /
• 제5권5호
• /
• pp.295-302
• /
• 2011

To n the field of nuclear medicine, with regard to checking regular patients, from the moment they register up to the doctor's diagnosis, the person in charge of the checks can find errors in the diagnosis, reexamine, reanalyze the results or save images to PACS. Through this process, the results obtained from the readings are delayed due to checks and additional tests which occur in hospitals, causing patient satisfaction and affected reliability. Accordingly, the purpose is to include visual inspection of the results to minimize error, improve efficiency and increase patient satisfaction. Nuclear medicine and imaging tests from examines at Asan Medical Center, Seoul, from March 2008 to December 2008, were analyzed for errors. The first stage, from January 2009 to December 2009, established procedures and know-how. The second stage from January 2010 until June 2010 conducted Pre-and Post-filtering assessment, and the third stage from July 2010 until October 2010 consisted of cross-checks and attaching stickers and comparing error cases. Of 92 errors, the 1st, 2nd and 3rd stage had 32 cases, and there were 46 cases after the 4th stage, with the overall errors reduced by 74.3% from 94.6%. In the field of general nuclear medicine, where various kinds of checks are performed according to the patient's needs, analysis, image composition, differing images in PACS, etc, all have the potential for mistakes to be made. In order to decrease error rates, the image can continuously Cross-Check and Confirm diagnosis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.1012-1014
• /
• 2012

Integral imaging is considered as a next-generation 3D display which can display 3d imaging in space using lens array. The performance of integral imaging systems depends on several factors including display panel, lens array, imaging devices and so on. In this paper, we develop a unifying framework to evaluate the resolution of integral imaging systems under fixed resource constraints. The proposed framework enables one to optimize the system performance. To show the feasibility of the proposed method, we carry out Monte Carlo simulations based on this framework and present the results.