• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2256-2262
• /
• 2015

Recently, device-to-device (D2D) communication has been considered as key technology for future cellular system, because it can solve the problem of excessive data traffic increment and can also provide new communication services. Herein, we propose new neighbor discovery for D2D communication and examine its performance. Our proposed scheme is proximity beacon based discovery in which wireless resource for pilot transmission is assigned based on the spatial correlation of wireless channel and sensing period is adjusted according to target accuracy such that power consumption can be reduced. The performance of our propose scheme is analyzed mathematically and verified through computer simulations.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.427-433
• /
• 2015

The rapid advancement of computing technology has triggered the need for fast data I/O processing and high-performance storage technology. Next generation memory technology, which we refer to as new memory, is anticipated to be used for high-performance storage as they have excellent characteristics as a storage device with non-volatility and latency close to DRAM. This research proposes NTL (New memory Translation layer) as a technology to make use of new memory as storage. With the addition of NTL, conventional I/O is served with existing mature disk-based file systems providing compatibility, while new memory I/O is serviced through the NTL to take advantage of the byte-addressability feature of new memory. In this paper, we describe the design of NTL and provide experiment measurement results that show that our design will bring performance benefits.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.121-130
• /
• 2006

In next generation wireless networks, an application must be capable of rating service information in real-time and prior to initiation of the service it is necessary to check whether the end user's account provides coverage for the requested service. However, to provide prepaid services effectively, credit-control should have minimal latency. In an endeavor to support real-time credit-control for Mobile IPv6 (MIPv6), we design an implementation architecture model of credit-control authorization. The proposed integrated model combines a typical credit-control authorization procedure into the MIPv6 authentication procedure. We implement it on a single server for minimal latency. Thus, the server can perform credit-control authorization and MIPv6 authentication simultaneously. Implementation details are described as software blocks and units. In order to verify the feasibility of the proposed model. latency of credit-control authorization is measured according to various Extensible Authentication Protocol (EAP) authentication mechanisms. The performance results indicate that the proposed approach has considerably low latency compared with the existing separated models, in which credit-control authorization is separated from the MIPv6 authentication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.327-335
• /
• 2001

In the 21st century, broadcasting, communication, and computer have been integrated due to the development of digital technology. Accordingly, to overcome the limit of respective communication media and to maintain them, their independent area shall not be classified. This study is to examine the future environment of digital TV broadcasting, to analyze customizing type service and interactive type TV technology, and to make asymmetric interactive digital TV publication broadcasting system, which is TV broadcasting in the next generation to treat visual image, sound, and various data all together by harmonizing broadcasting and communication like ISDB(Integrate Service Digital Broadcasting). In addition, to develop service on publication broadcasting with high quality, this study is to propose to develop relative devices for TV/PC reception to realize a new communication type TV publication broadcasting, by analyzing technology for producing, sending, transmitting, receiving, and saving to apply to customizing type interactive system and by examining its application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.934-937
• /
• 2010

In this paper, we did pursue the embodiment of a mouse pointing system which help the handicapped and people of not familiar with using electronics use electronic devices easily. Speech Recognition and 3-axis acceleration sensors in conjunction with a headset, a new mouse pointing system is constructed. We used speaker dependent system module which are generating the BCD code by recognizing human voices because it has high recognition rate rather than speaker independent system. Head-set mouse system is organized by 3-axis accelerometer, sound recognition module and TMS320F2812 processor. The main controller, TMS320F2812 DSP-processor is communicated with main computer by using SCI communications. The system is operated by Visual Basic in PC.

• Journal of Internet Computing and Services
• /
• v.4 no.5
• /
• pp.1-9
• /
• 2003

In this paper, we combine AMC (Adaptive Modulation and Coding) with MIMO (Multiple Input Multiple Output) multiplexing to improve the throughput performance of AMC in Next Generation Communication Mobile Systems. In addition, we propose a system that adopts STD (Selection Transmit Diversity) in the combined system. The received SNR (Signal to Noise Ratio) is improved by adopting STD techniques and an improved SNR increases a probability of selecting MCS (Modulation and Coding Scheme) level that supports higher data rate. The computer simulation is performed in flat Rayleigh fading channel. The results show that higher throughput is achieved by AMC-TD schemes. AMC-STTD scheme shows about 250kbps increase in throughput. And AMC-STD with 2 transmit antennas achieves about 420 kbps throughput improvement over the conventional AMC at 9dB SNR.

• Information and Communications Magazine
• /
• v.30 no.12
• /
• pp.37-50
• /
• 2013

아이폰을 비롯한 새로운 스마트 기기의 도입으로 촉발된 폭발적인 데이터 트래픽의 증가는 사회.경제적으로 큰 변화를 가져 왔으며, 앞으로도 그 추세가 계속될 것으로 예측되고 있다. 국내의 경우 증가하는 데이터 트래픽을 수용하기 위해 10MHz의 LTE 시스템을 도입하여 상용 서비스를 시작한 바 있으며, 올해 하반기부터는 20MHz의 광대역 LTE 서비스와 함께 2개의 반송파를 집성하는 CA(Carrier Aggregation) 기술이 적용된 LTE-Advanced, 즉 4G 상용 서비스를 이미 개시하였다. LTE 상용 서비스가 본격화 되기 시작하면서 제조업체와 대학, 연구소 등을 중심으로 다음 세대 이동통신 기술에 대한 관심이 보다 높아졌으며, 최근 LTE-Advanced 상용 서비스 개시를 계기로 5G 이동통신에 대한 논의가 본격적으로 시작되고 있다. ITU-R WP(Working Party) 5D는 2012년 7월에 개최된 제13차 회의에서 2020년 및 그 이후의 미래 IMT 시스템을 위한 비전(Vision) 및 기술동향 연구를 수행하기로 결정하였으며, 2013년부터 본격적인 연구에 착수하여 미래 IMT 기술동향 보고서와 미래 IMT 비전 권고를 각각 2014년과 2015년까지 개발할 계획이다. 이와 관련하여 3GPP와 IEEE 802도 현재 표준화가 진행되거나 진행 예정인 최신 기술들을 중심으로 미래 IMT 기술동향 보고서에 대한 기고를 제출하였다. 향후 ITU-R WP 5D는 전례로 볼 때 현재 진행 중인 2020년 및 그 이후의 미래 IMT 시스템을 위한 비전 및 기술동향 연구 작업이 마무리하면, 4G인 IMT-Advanced의 경우와 마찬가지로 5G의 기술적 요구사항을 정의하고, 5G 후보 기술규격을 외부 표준화 기구들로부터 제안 받아 5G 기술로 승인하는 과정을 밟게 될 것이며, 이후 이 요구사항을 만족하는 시스템을 5G 이동통신 시스템이라고 명명하게 될 것이다. 5G 이동통신 시스템에 대한 요구사항은 다양한 의견 교류를 통해 큰 틀에서 컨센서스를 이루어가는 중이며, 이러한 내용이 ITU-R WP 5D의 기술적 요구사항에 반영되어 보다 구체화 될 것이다. 반면 5G에 대한 기술적 접근방법에 대해서는 여러 시각들이 존재하는 것이 사실이나, 현재 이에 대한 논의가 활발히 진행되고 있으며, 결국은 관련 표준화 기구들에서의 논의를 통해 그 접근방법이 최종적으로 결정될 것으로 보인다. 본 고에서는 먼저 5G 이동통신 요구사항과 4G 이후의 표준화 기술에 대해 살펴 본 후, 향후 이동통신 기술이 어떤 시나리오에 따라 발전할 것인지, 5G 네트워크는 어떤 구조를 갖게 될지, 그리고 어떤 기술이 적용될 지 등에 대해 개인적인 시각에서 전망해보고자 한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.44-53
• /
• 2013

Ongoing SWIM(System Wide Information Management) with the United States and European countries as the center is a part of the ASBU(Aviation System Block Upgrade) program improved performance of aeronautical data system in the International Civil Aviation Organization and a core technology of Integrated Aeronautical Data Management Network to elevate service through digitally aeronautical information management. Therefore, in this paper, we analyze SWIM architecture and network applied the concept of SOA(Service Oriented Architecture), and propose methods of implementation transforming applications operating established legacy aeronautical data system into integrated aeronautical data management network through adapter technology. This will allow development of middleware and application suitable for the next generation infrastructure network environment for efficient ATM(Air Traffic Management)and provide timely required information for users.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.343-350
• /
• 2002

This paper describes the implementation of H.235 protocol for authentication and media stream encryption of multimedia conference systems. H.235 protocol is recommended by ITU-T for H.323 multimedia conference security protocol to prevent from being eavesdropped and modified by an illegal attacker. The implementation in this paper has used password-based with symmetric encryption authentication. Media streams are encrypted using the Diffie-Hellman key exchange algorithm and symmetric encryption algorithms such as RC2, DES and Triple-DES. Also, 128-bit Advanced Encryption Standard and 128-bit Korean standard SEED algorithms are implemented for the future extension. The implemented authentication and media stream encryption has shown that it is possible to identify terminal users without exposing personal information on networks and to preserve security of multimedia conference. Also, encryption delay time and used memory are not increased even though supporting media stream encryption/decryption, thus the performance of multimedia conference system has not deteriorated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.275-282
• /
• 2017

Revit program is one of the architectural design programs based on the BIM (Building Information Modeling) technology, which is attracting attention as a next-generation three-dimensional architectural design technique. Revit is a program that enhances the information input side and makes it easy to understand components by making it an object called an information family of components from the design stage, but there is no program that easily compares the drawing output files extracted from this program. It is difficult to analyze the changes to the same drawings modified at the time of collaboration and easily share the drawing information. In this paper, we propose and implement a version management system for the output files on the same drawing, so that the parallel collaboration work of output drawing files through Revit can be efficiently performed. We propose an improved KMP algorithm.