• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.112-121
• /
• 1999

An MR(Magneto-Rheological) fluids damper is designed and applied to vibration suppression of a 1/4 car model. The damping constant of MR damper changes according to input current which is controlled in a semi-active way. Several control algorithms are compared in simulations and experiments. The advantage of the proposed Frequency shaped LQ control is that passenger comfort is emphasized in the range of 4~8Hz and driving safety is emphasized around the resonance frequency of unsprung mass.

• Journal of the KSME
• /
• v.33 no.10
• /
• pp.902-911
• /
• 1993

반능동 현가 시스템의 장점은 능동 및 수동 현가 시스템의 장점을 모두 갖고 있다는 것이다. 즉, 반능동 시스템은 수동 현가장치에 비해 우수한 성능을 제공하면서 대형 액츄에이터나 큰 동력 원을 필요로 하지 않는다. 지금까지는 승차감 및 조향성능을 향상시키기 위한 능동 및 반능동 현가시스템에 관한 연구가 많이 이루어졌으나, 능동 또는 반능동 현가시스템을 이용하여 대형 차량의 주행 안정성을 향상시키고, 대형차량에 의해 주로 발생하는 도로의 파손을 줄이면서 차 량의 수송능력을 향상시키는 연구는 최근에 유럽과 미국의 대형트럭 제조업체와 정부 주도로 활발하게 진행되고 있다. 그러므로 반능동 현가시스템에 의한 대형 트럭의 성능 향상 가능성 및 연구 개발도 승용차용 능동 및 반능동 현가시스템과 함께 앞으로의 주 연구 과제이다. 이글에 서는 우선 가변 댐퍼 및 반능동 현가시스템의 기본 원리를 설명하고, 반능동 현가시스템의 Bilinear Model, 제어방법에 대하여 언급한 후, 컴퓨터 모의 실험결과를 통하여 반능동 현가시 스템에 의한 차량의 동적 성능 향상을 두 가지 측면, 즉, 승용차와 대형트럭의 측면에서 언급될 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.82-88
• /
• 2018

This study investigated the structure of an 8-pole 8-slot linear generator, which acts as an electromagnetic damper by combining the structure of an electromagnetic suspension device capable of generating electrical energy through energy harvesting by absorbing the vibration energy from the road surface while driving. To compare the energy harvesting effect of the electromagnetic suspension according to the actual road surface, a driving road test was simulated for two actual road conditions, an asphalt road surface and unpacked road surface condition, using a civilian combined vehicle model in conjunction with a vehicle simulation program, Carsim and Simulink. As a result, the relative displacements of the suspensions on the asphalt road surface and the unpaved road were 8 mm and 13 mm, respectively. By applying the suspension displacement value derived by modeling the linear generator coupled to the electromagnetic suspension, the simulation was then performed for an analysis time of 0.3s by applying the same analytical conditions using the commercial electromagnetic analysis program, ANSYS MAXWELL, The average power generation on the unpacked roads and asphalt roads was 198.6W and 98.7W respectively, which was 103.7% higher for unpackaged roads. Finally, to compare the sensitivity of the road surface frequency and the suspension input displacement to the power generation output, the sensitivity of the two variables was 1.725 and 1.283, respectively, and the road surface frequency had a 34.5% higher effect on the average power generation.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.175-181
• /
• 2007

본 연구에서는 지하철용 전동차의 현가장치를 구성하는 1차 현가장치 및 2차 현가장치의 강성 및 감쇠지수 변화가 전동차의 상하진동에 미치는 영향을 분석하였다. 실제 운행 중인 전동차에 대하여 액슬박스, 대차, 객차에서 측정된 진동 데이터를 바탕으로 대차와 차체로 구성된 2자유도계 해석모델을 생성하였고, 실측된 윤축의 진동을 입력신호로 하여 수치해석을 수행하였다. 1, 2차 현가장치의 강성 및 감쇠지수의 변화에 따른 응답을 고찰한 결과, 차량의 상하진동에 지배적인 영향을 주는 설계변수는 2차 공기스프링의 강성임을 알았다. 또한 이러한 결과는 ADAMS/RAIL 전산해석을 통해서도 검증할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1003-1008
• /
• 2012

The paper presents an Experimental Vehicle Model (EVM), that utilizes the kinematic characteristics of suspensions from SPMD test data. The relative displacement and orientation of a wheel with respect to the body are represented as a function of the vertical displacement of the wheel. The equations of motion of the vehicle are formulated in terms of local coordinates that do not require coordinate transformation, which improves the efficiency of dynamic analysis. The EOM was modularized for each suspension model, and a $6{\times}6$ vehicle model was obtained by combining six suspensions. The analysis results were compared with ADAMS to verify the accuracy of the EVM. This study also verifies the feasibility of real-time simulation with the developed EVM. For a vehicle simulation for 1 ms, the real simulation time required within 20% of the prescribed time. This result shows that the EVM meets the real-time simulation requirements.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.295-301
• /
• 1997

본 연구의 목적은 수도권 전동차량의 주행성능을 평가하는 방법으로 진동성능을 비교검토하기 위하여 실차측정하고 분석한 것이다. 전동차량의 제작년도별로 측정대상차량을 샘플링하여 다양한 조건에서 진동을 측정하고 실측데이타를 시간영역의 통계적 방법으로 분석한 결과 제작년도에 따른 영향도 약간 나타났으며 전동차량의 2차 현가장치의 종류에 따른 영향을 발견할 수 있었다. 또한 측정선로구간의 특성에 따른 영향도 비교적 잘 나타나고 있음을 알 수 있었다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1215-1223
• /
• 2006

A leaf spring suspension has been widely used since it can carry big load and its simplicity. But one major drawback is the poor ride performance because of the friction in the system and the high stiffness coefficient. To overcome these, an air spring suspension can be used. The air spring suspension system can improve the ride of the heavy vehicle significantly and also it can adjust the height to the loading and unloading. The road tests for the truck with the leaf spring suspension and air spring suspension are performed to compare the ride quality of the two systems. To develop the air spring suspension system tailored to the target truck, chassis development procedure using CAE has been applied.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.332-339
• /
• 2006

A leaf spring suspension has been widely used since it can carry big load and simplicity. But one major drawback is the poor ride performance because of the friction in the system and the high stiffness coefficient. To overcome these, air spring suspension can be used. The air spring suspension system can improve the ride of the heavy vehicle significantly and also it can adjust the height to the loading and unloading. A truck with the leaf suspension system is modified with the air suspension system and the performance of the vehicle is compared using the suggested method. The existing leaf suspension can be replaced with the air suspension system to improve the performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.25-30
• /
• 2013

In military vehicles moving over poor roads, severe vibration of the chassis can damage internal components. Currently, many studies have focused on active and semi-active suspensions to reduce the vibration of the chassis. In this study, a vibration reduction technique is suggested by applying a unique rotating suspension structure. SH-ADD, a type of modified Skyhook, was selected as a controller for vibration reduction. A random ISO class E road was selected as the driving road. The simulation was performed using ADAMS Control and Matlab Simulink. The control result was compared with the RMS acceleration with a focus on the cumulative fatigue of the internal equipment.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.210-211
• /
• 2017

본 논문에서는 자동차가 주행 시 노면에서 발생되는 충격을 흡수하는 현가장치에서 전기에너지를 얻기 위한 에너지 하베스팅 기술에 적용 가능한 전력변환 시스템에 관하여 연구 하였다. 제안된 전력변환장치는 2상 AC-DC 다이오드를 직렬로 구성하여 선형 발전기의 서로 다른 주파수와 크기를 갖는 출력전압에 대해 효과적으로 전기에너지로 변환하도록 하였다. 제안한 전력변환시스템의 가능성을 확인하기 위해 시뮬레이션과 실험을 통하여 검증하였다.