• Journal of the Korean Data and Information Science Society
• /
• v.23 no.2
• /
• pp.247-256
• /
• 2012

Recently, estimation of greenhouse gas (GHG) emission has continuously emerged as an important global issue. This study compares various statistical methods for estimation of fuel consumption, which is necessary for calculation of GHG emission in road transportation sector. Existing methods have focused on using merely transportation fuel supply or distance traveled for calculation of fuel consumption. Estimates of GHG emission based on fuel supply, however, cannot reflect various vehicle types or model year. This study suggests and compares, from statistical point of view, several methods, which can be applied to estimate fuel consumption of each vehicle, by combining distance traveled and fuel efficiency (mileage), and total fuel consumption of all vehicles. It also suggests practical measures that can reflect vehicle types and model year to suggested methods for future research.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.291-297
• /
• 2010

Strut insulator in a vehicle is an important part to prevent noise and vibration which is created for driving on the road. Most of the viscoelastic-mounts are made of rubber and natural rubber is the key ingredient. These rubber products show well performance for the initial time, but they will degrade after they are exposed to a high temperature circumstance and a cyclic load. NVH performance and comfort in a vehicle were decreased by these degradation of the rubber. In this study, spring displacement in a vehicle was measured to make a profile in the simulation test performed with an acceleration sensor. In addition, acceleration level, rubber permanent deformation and hardness of the rubber were measured according to drive distance and vehicle model.

• Journal of ILASS-Korea
• /
• v.23 no.3
• /
• pp.128-135
• /
• 2018

In this study, the following conclusions could be obtained from the analysis of emissions contribution rates and features for contaminated emissions by 13,456 gasoline vehicles passed in the vehicle load test (ASM-idle) under the inspection year 2013 to 2017. It was confirmed that the contamination of the CO, HC, NOx by the displacement is reduced on over 3L engine. As a result of comparing the exhaust gas in the low speed idle mode and the AS2525 mode, the exhaust gas in the low speed idle mode was measured high. It is estimated that if ISG function is applied, emissions from idle condition will be reduced. NOx emissions were reduced when the engine power was above 200HP. It has been confirmed that the amount of exhaust emissions are significantly reduced for vehicles manufactured after 2004. As a result of analyzing the exhaust gas according to the season, it is judged that there is a correlation between HC and NOx according to the ambient temperature. The concentration of exhaust emission in vehicles with high accumulated distance increases, which is considered to be the result of aging of the vehicle.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2D
• /
• pp.167-174
• /
• 2012

Recently, the effort to reduce $CO_2$ emission concerning certified emission reductions (CERs) is progressing lively with the institute in the center through lifecycle. However, the technique for reduce $CO_2$ emission is the first stage yet and the technique is insufficient to calculate with accuracy it. Therefore, this study tries to develop the method to measure by actual time $CO_2$ emission of construction equipment using Zigbee sensor. To review the method that calculate $CO_2$ emission, have classified the impact factors that affect at $CO_2$ emission by IPCC guideline. It also has review the application of Zigbee sensor that use wireless data communication. The reviewed result get that the measuring objects are the $CO_2$ emssion, RPM and fuel consumption of equipment, there are needs to search the year of equipment, waiting time, kind of vehicle and fuel that affect to $CO_2$ emission.