• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.17.2-17.2
• /
• 2009

Al Foam 소재는 다공질 금속으로써 저밀도 및 우수한 충격에너지 흡수능으로 최근 새로운 기능성 재료로 부상하여 세계 각국에서 연구개발이 활발하게 진행되고있다. 특히 이러한 Al Foam재를 자동차용 부품의 충격흡수재로사용할 경우 뛰어난 충격흡수능으로 인해 고안전 차량 부품 개발에 획기적인 기술 적용이 기대된다. 그러나, 종래 Al Foam재를 기계부품 등에 삽입할 경우 발포금속을 제조하여 부품 형상에 따라 가공하여 삽입하였으나 이는 공정 중 추가적인 기계 가공 및 비용이 들며 이에 따라생산성이 떨어지는 단점이 있었다. 따라서 본 연구논문에서는 차량용 충격흡수 부품 제작에있어 추가적인 가공 및 공정 수를 줄일 수 있는 Y-프로세스라는 주조공법을 적용하여 Net 형상 Al Foam재를 제작하였다. Y-프로세스는 Al Foam 금속 용탕이 주형에 투하되었을 때 Net 형상의 주형을 용탕 내 삽입하여 금속 용탕의 발포 및 응고시 Net 형상을따라 발포 및 응고가 되도록 하여 Net 형상의 Al Foam이삽입된 부품을 만드는 공법을 말한다. Y-프로세스로제조된 Al Foam재는 주형 내 완전히 충진되지는 못하였으나 주형내 충진된 Al Foam재의 상하부 셀크기가 비교적 균일한 모습을 나타내어 향후 공정제어를 통해 우수한 품질의 Net 형상 Al Foam 제조가 가능함을 알 수있었다.

• Journal of KIISE:Information Networking
• /
• v.37 no.2
• /
• pp.157-161
• /
• 2010

Vehicular Ad-hoc NETworks (VANETs) suffer from frequent network disconnections due to obstacles such as buildings even in urban environments with high density of traffic. Thus, in this paper, we propose a routing algorithm that finds optimal end-to-end paths in terms of both traffic density and distance in the urban VANET and selects the next hop with the minimum distance, while maintaining the minimum hop counts over the path. The simulation results show that the proposed algorithm achieves higher throughput and smaller end-to-end delay than Greedy Perimeter Stateless Routing (GPSR) with message carrying.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10C
• /
• pp.992-998
• /
• 2005

In this paper, An Ultra Fast Acquisition Algorithm of low transmission rate ultra-wideband(UWB) systems for car positioning and traffic light controling is proposed. Since the acquisition algorithms for CDMA system are not fast enough to access the low transmission rate UWB systems, the new ultra fast acquisition scheme which can be implemented with low cost and simplified circuit is required. The proposed algorithm adopted the Recurrent Sequential Estimation scheme and trinomial M-sequence. Therefore, The proposed scheme can reduce the average acquisition time in $1\~3{\mu}sec$ with simple circuit, even for the UWB systems which use long pseudo-noise(PN) sequence and transmit low power below the FCC EIRP emission limits. The simulation results for the average acquisition time of the proposed scheme are compared with the ones of the existing acquisition schemes.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.439-442
• /
• 2010

본 논문에서는 비전 기반의 실시간 대기오염 모니터링 시스템을 제안한다. 제안된 시스템은 먼저 실시간으로 제공되는 동영상을 분석하여 차종 별 대수와 평균속도 등의 교통 파라미터를 실시간으로 추출하고, 이를 바탕으로 대기 중의 CO, NO2등의 밀도를 추정하여 시간대별 대기 오염도를 모니터링 한다. 이를 위해 제안된 시스템은 배경모델을 이용한 차량 추출, 차종 별 윤곽선 및 크기 정보를 이용하여 템플릿 기반으로 차종을 인식하고 이를 추적하여 대수 및 속도를 인식한다. 제안된 시스템의 평가를 위해 교통이 밀집된 공간에 설치하여 테스트하였고, 실제 결과와 비교한 결과, 차량 속도에서 정확도 83.3%, 차종인식에서 정확도 86.98%를 보였다. 이러한 실험 결과는 제안된 시스템이 다양한 지역에서 실시간 대기오염물질 배출량을 산정하는데 적용될 수 있음을 보여주었다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.195-200
• /
• 2020

With the growing interest in fossil fuel depletion and environmental pollution, railroad cars operating in Korea are in progress as the conversion from diesel to electric vehicles expands. The photovoltaic system, which is applied as an example of the conversion of electric vehicles, is infinite and pollution-free, and can produce energy without generating hazards such as air pollution, noise, heat, and vibration, and maintain fuel transportation and power generation facilities. There is an advantage that is rarely needed. However, the amount of electricity produced depends on the amount of solar radiation by region, and the energy density is low due to the power generation of about 25㎡/ kWp, so a large installation area is required and the installation place has limited problems. In view of these problems, many studies have been applied to fuel cells in the railway field. In particular, the plan to link the fuel cell power generation system railroad power supply system must be linked to the power supply system that supplies power to the railroad, unlike solar and wind power. Therefore, it has a close relationship with railroad cars and the linkage method can vary greatly depending on the system topology. Therefore, in this paper, we study the validity through simulation modeling related to linkage analysis according to system topology.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.41-46
• /
• 2011

The tire damage classification method is researched by periodicity detection of ultrasonic envelope signals to occur at the driving vehicle tire. Because periodic signals is generated by rotations of the damaged tire, it should convert to pulse for using the density function. After time intervals of pulses are represented by the density function, the dominant periodicity is detected. The threshold to make a pulse is calculated by moving average of envelope signals. The result of time density function in case of one damage material, the first peak's time is equals to tire's rotation period, 162ms and 102ms, about the speed of 50km/h and 80km/h. In case of more than one damage material, the sum of each peak's time is equals to tire's rotation period about the speed.

• Journal of the Society of Disaster Information
• /
• v.7 no.2
• /
• pp.87-95
• /
• 2011

The skid resistant of pavement surface is an important parameter since it is directly related to the traffic safety under moving vehicular loads. In particular, it should be considered as a major factor in pavement performance evaluations to reduce the traffic accident from vehicular sliding. In this study, a portable and an automatic skid resistance tests were used to evaluate the skid resistances of the in-situ pavements. The test results showed that the skid resistance of the conventional dense graded pavement was more noticeable than the other pavement types such as the drainage pavement and the stone mastic asphalt(SMA) pavement as the service life of pavement was increased.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.43-49
• /
• 2008

The objective of this research was to test a hypothesis that sprawl increases congestion, and so the estimated evacuation time become longer. For this, sprawl was thought to be poor accessibility so that vehicle miles of travel become longer. This research shows that the daily vehicle miles per lane mile that are thought to be an accessibility index had a strong and statistically significant relationship to the estimated evacuation time, while urban population density has no statistically significant relationship to the evacuation time. The result of this research recommends that we should consider sustainable land use patterns that decrease traffic demand by providing good accessibility.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.291-296
• /
• 2015

The tire damage classification method is researched on the periodicity detection of ramdomness ultrasonic signals to occur at the driving vehicle tire. Setting method of adaptive threshold is proposed in order to valid pulse detection by tire damage in ultrasonic noise on the road and used low pass filter for decrease signal ramdomness as preprocessing. Time interval of detected pulse is setted the density function depend on the vehicle's speed and the method of tire damage detection is proposed that measuring the first peak's time of time density function.The result of time density function in case of one damage material, the first peak's time is measured within the error limit of tire's rotation period, 169.8ms and 97.9ms and 81.8ms, about the speed of 50km/h and 80km/h and 100km/h. In case of more than one damage material, the sum of each peak's time is measured within the error limit of tire's rotation period about the speed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.87-94
• /
• 2006

Estimating moving vehicle loads is important in modeling design loads for bridge design and construction. The paper proposes a moving force identification algorithm using moment influence lines measured at multi-axes. Density estimation function was applied to estimate more than two wheel loads when estimated load values fluctuated severely. The algorithm has been examined through simulation studies on a simple-span plate-girder bridge. Influences of measurement noise and error in velocity on the identification results were investigated in the simulation study. Also, laboratory experiments were carried out to examine the algorithm. The load identification capability was dependent on the type and speed of moving loads, but the developed algorithm could identify loads within 10% error in maximum.