• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.39-51
• /
• 1996

In the turning maneuver of the vehicle, its motion is mainly dependent on the genuine steering characteristics in view of the directional stability for stable turning ability. The under steer vehicle has an ability to maintain its own directonal performance for unknown external disturbances to some extent. From a few years ago, in order to acquire the more enhanced handling performance, some types of four wheel steering vehicle were considered and constructed. And, various rear wheel control logics for external disturbances has not been suggested. For this reason, in this posed rear wheel control logic is based on the yaw rate feed back type and is slightly modified by an yaw rate tuning factor for more stable turning performance. And an external disturbance is defined as a motivation of the additional yaw rate in the center of gravity by an uncertain input. In this study, an external disturbance is applied to the vehicle as a form of the additional yawing moment. Finally, the proposed rear wheel control logic is tested on the multi-body analysis software(ADAMS). J-turn and double lane change test are performed for the validation of the control logic.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.82-91
• /
• 2003

Vehicle dynamics control (VDC) has been a breakthrough and become a new terminology for the safety of a driver and improvement of vehicle handling. This paper examines the usefulness of a brake steer system (BSS), which uses differential brake forces for steering intervention in the context of VDC, In order to help the car to turn, a yaw moment can be achieved by altering the left/right and front/rear brake distribution. The steering function achieved through BSS can then be used to control lateral position in an unintended road departure system. An 8-DOF non-linear vehicle model including STI tire model will be validated using the equations of motion of the vehicle, and the non-linear vehicle dynamics. Since fuzzy logic can consider the nonlinear effect of vehicle modeling, fuzzy controller is designed to explore BSS feasibility, by modifying the brake distribution through the control of the yaw rate of the vehicle. The control strategies developed will be tested by simulation of a variety of situation; the possibility of VDC using BSS is verified in this paper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.87-96
• /
• 2013

This paper shows how the performance of an ESC(Electronic Stability Control) system can be affected by the selection of in-vehicle network protocols such as CAN or FlexRay. The vehicle control performance under ESC operation is analyzed by EILS(ECU-In-the-Loop Simulation). The experimental set-up for the EILS of the ESC system consists of two 32-bit microcontroller boards communicated with CAN or FlexRay protocols. A 7-DOF vehicle model and an ESC algorithm with 2-DOF reference vehicle model are implemented on each microcontroller respectively. It is shown by experimental results that the ESC system using the FlexRay protocol can achieve better performance than that using the CAN protocol for a fast and accurate lane changing.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.1 s.74
• /
• pp.69-74
• /
• 2007

This paper is concerned about the dynamic analysis of an underwater test miner, which operates on cohesive soil. The test miner consists of tracked vehicles and a pick-up device. The motion of the pick-up device, relative to the vehicle chassis, is controlled by two pairs of hydraulic cylinders. The test miner is modeled by means of commercial software. A terramechanics model of cohesive soft soil is implemented with the software and applied to a dynamic analysis of the test miner model. The dynamic responses of the test miner are studied with respect to four different types of terrain conditions.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.149-154
• /
• 2002

A simplified 3D dynamic model of tracked vehicle crawling on cohesive soft soil is investigated. The vehicle is assumed as rigid body with 6-dof. Cohesive soft soil is modeled through relations: pressure to sinkage, shear displacement to shear stress, and shear to dynamic sinkage. Equations of motion of vehicle are derived with respect to the body-fixed coordinates. In order to investigate 3D transient dynamics of tracked vehicle, Newmark's method is employed based on incremental-iterative algorithm. 3D dynamic simulations are conducted for a tracked vehicle model and steering performance is investigated.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.17-23
• /
• 2011

To estimate fuel consumption of a vehicle, a car can be tested on chassis dynamometer. In this case, test causes a lot of time and money. To predict the fuel efficiency of vehicles in the design stage or early stage of development, the development of computer simulation model is necessary. Using simulation to predict the fuel consumption, the driving model which consists of time-velocity profile and time-grade profile is necessary In this study, vehicle model is developed in MatLab/simulink to estimate real driving fuel consumption rate with time-velocity profile, time-shift gear profile and time-grade profile. Vehicle model consists of driver model, engine model, power train model, and so on. On-road vehicle tests to verify the vehicle model are carried out for analyzing the result of simulation and comparing with those of the experiments.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1270-1276
• /
• 2003

This paper describes an analytical method for wheel wear prediction. The outputs from vehicle dynamic software are used to calculation the wheel wear. Two calculation examples are shown for a high-speed line and a conventional line. Through the comparison of two cases, we can see the wheel wear characteristics on the conventional line and the high-speed line. The conventional line has many curved tracks that cause severe wheel flange wear. The influences of curve radius on wheel wear are also described considering the operational performance of the high speed trainset. A method of calculation using contact patch work model is presented for determination of the evolution by wear railway wheels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.164-172
• /
• 2001

Various HILS systems for developing and testing vehicle mechatronic systems have been proposed and constructed during the last few years. However, performance of those systems have not been evaluated in a systematic way. Based on the transfer function approach, this paper presents a method far evaluating performance such as stable dynamic simulation range of a proposed steering HILS system. In the evaluation, we have investigated effects of time delays that exist in the real-time dynamic simulation, additional actuators, and data transmission on the stable dynamic simulation range, simulation frequency range, and steering feel. This evaluation methodology may be useful to help engineers develop a HILS system for their own purposes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.101-109
• /
• 1994

Recently, four-wheel steering systems have been developed and studied as one of the latest automotive technologies for improving the handling characteristics of a vehicle. In much of the proposed four-wheel steering systems, the side slip angle at the vehicle's center of gravity is maintained at zero. This approach allows the greater maneuverability at low speed by means of counter-phase rear steering and the improved stability at high speed through same-phase rear steering. In this paper, the effects of several four-wheel steering systems are studied and discussed on the responsiveness and stability of the vehicle by using the linear analysis. Especially, the effects of the cornering stiffnesses of both front and rear wheels are investigated on the yaw velocity gain and critical speed of the vehicle.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.778-783
• /
• 2012

Due to the increase of oil price, the needs of the reduction of the fuel cost is rising. Therefore, necessity of hybrid vehicle that runs with engine and the electric motor is on the rise. In order to improve the performance of hybrid vehicle, many researches is carried out. Hybrid vehicles have been developed with the various layout such as serial type, parallel type, power split type, and multi-mode type. The multi-mode hybrid vehicles are designed to show the efficient driving characteristics at low speed and high speed. But the multi-mode system have the problem such as frequent clutch engagement. Frequent clutch engagement causes the shock of vehicles, and the shock inhibits the ride comfort. In this study, automation mechanism of clutch operation is proposed to mitigate the shock at engaging clutch. For this purpose, the dynamic characteristics of motor control is numerically analyzed by using Matlab/Simulink.