• Journal of the Korea Society for Simulation
• /
• v.30 no.1
• /
• pp.127-137
• /
• 2021

The method of utilizing the strain and vibration values of rails is primarily used to diagnose the condition of wheels and railroad facilities. The dynamic load is measured under the assumption that the strain of the rail and the load of the railroad vehicle are proportional. Wheel condition is measured under the assumption that the magnitude of the defect and the magnitude of the rail vibration are proportional. However, environmental factors affecting the strain and vibration of the rail such as vehicle speed, wheel load, climate, and track conditions are not reflected, many errors occur depending on the measurement conditions. In this study, the effect of track distortion, which is a major indicator of the track condition among the environmental factors that affect the strain and vibration of the rail, on the strain and vibration of the rail, was examined through dynamic simulation. As a measure to reduce the measurement deviation, the effect of securing additional measurement points was analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.697-704
• /
• 2017

This study was carried out to investigate and alleviate the vibration problem of commercial high-speed trains. First, the measurement of the carbody vibration was performed, in order to determine the vibration level of the high-speed train. The measurement result showed that the vibration level of the driver cab was higher than that of the passenger car and that the vibration became bigger toward the trailing end of the train. The vertical vibration of the driver cab and passenger car was larger than the transverse vibration, and the maximum value of the vibration in the ballast section was larger than that in the concrete section. A dynamic analysis was carried out to improve the vibration of the KTX-Sancheon train. The results of the analysis showed that it is necessary to reduce the vibration of the driver cab and both ends of the passenger cars. To reduce the vibration of the driver cab, it was recommended that the stiffness of the secondary coil spring be reduced and the damping coefficient of the secondary vertical damper be increased. It was found that the failure of the suspension system could be the origin of the vibration problem of the high-speed train. The proper management of wheel wear plays an important role in the improvement of the operation efficiency and reduction of the carbody vibration of high-speed trains, and research is underway to change the present wheel profile to increase the mileage between wheel turning.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.836-841
• /
• 2011

In recent years, the concern about the reliability of railway vehicles is increasing, Many studies on reliability is in progress. But, the existing railway cars have been running without any specific criteria for vibration. So, we looked into the effect of the vibration and braking devices.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.427-428
• /
• 2010

정비밴과 수리부속밴은 2.5톤 군용차량에 쉘터를 탑재하여 사용한다. 쉘터 내부는 선반형태로 구성된 정비밴과 서랍형태로 구성된 수리부속밴이 포장도로 및 비포장 도로 주행 시 받게 되는 진동,충격 등의 동특성을 비교 분석하여 유사체계에 설계 시 기초자료로 활용하고자 한다.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.139-146
• /
• 1992

Vibrational behaviors of highway girder bridges due to heavy traffics are discussed, and empirical formulae for impact factors are suggested in this paper. Appropriate vehicle model for vibration analysis is found and impact factors are calculated with different surface roughnesses, vehicle speeds and span lengths. It is shown that the present codes tend to underestimate impact factors.

• Journal of the KSME
• /
• v.53 no.2
• /
• pp.49-53
• /
• 2013

철도차량은 중요한 친환경 대중교통 수단으로서 운행 구간이 확장되고 있다. 그러나 철도선로가 거주지역을 통과하여 설치되면서 환경 소음 문제가 야기되고 있으며 이의 저감이 중요한 이슈 중 하나이다. 철도차량 및 궤도에서 발생하는 전동음은 저감해야 할 주요 소음원 중 하나이다. 따라서 철도의 진동 및 소음 관련된 연구현황들에 대해 알아보고 궤도 지지단을 고려한 레일의 진동과 방사 소음 특성을 예측하고 궤도 모니터링 시스템 개발에까지 적용이 가능한 방법들에 대한 연구가 필요하다.

• Computational Structural Engineering
• /
• v.5 no.2
• /
• pp.87-91
• /
• 1992

Vibrational behaviors of highway girder bridges due to heavy traffics are discussed, and empirical formulae for impact factors are suggested in this paper. Appropriate vehicle model for vibration analysis is found and impact factors are calculated with different surface roughnesses, vehicle speeds and span lengths. It is shown that the present codes tend to underestimate impact factors.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.459-464
• /
• 2001

Vibration characteristics of a vehicle are mainly influenced by dynamic stiffness of the vehicle body structure and material and physical properties of the components attached to the vehicle body structure. In this paper, modeling techniques of the vehicle components are presented and the effects of the vehicle components on the vibration characteristics of the vehicle are investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.617-623
• /
• 2020

Urban railroad vehicles carry many passengers and are the core of an urban railroad transportation system. Therefore, the dynamic performance of the vehicle must be ensured. Dynamic behaviors such as the vibration and ride comfort of railway vehicles are affected by the structure of the suspension system. We analyzed the dynamic behavior of a railway vehicle according to the suspension system of an urban railway vehicle, which is mainly operated in Korea. For two types of vehicles with different suspension structures, the vibration of the vehicles on railway tracks was measured, and dynamic behavior characteristics such as vibration, ride, and vibration reduction rate were analyzed. The result of the test shows that the vibration performance of the body is superior to that of B-bogie in the lateral direction and that of A-bogie in the vertical direction. Overall, the ride quality of the A-bogie car is superior to that of B-bogie. When analyzing the vibration attenuation rate of primary suspension system, the vibration attenuation performance of B-bogie with coil spring was superior to that of A-bogie with a conical rubber spring. The secondary suspension system has better vibration attenuation performance for A-bogie with air springs compared to coil springs.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.229-237
• /
• 2023

The use of artificial sources such as explosives and mechanical vibrations for seismic exploration in urban areas poses challenges, as the vibrations and noise generated can lead to complaints. As an alternative to artificial sources, the surface waves generated by traffic noise can be used to investigate the subsurface properties of urban areas. However, traffic noise takes the form of plane waves moving continuously at a constant speed. To apply existing surface wave processing/inversion techniques to traffic noise, the recorded data need to be transformed into a virtual shot gather format using seismic interferometry. In this study, various seismic interferometry methods were applied to traffic noise data, and the optimal method was derived by comparing the results in the Radon and F-K domains. Additionally, the data acquired using various receiver arrays were processed using seismic interferometry, and the results were compared and analyzed to determine the most optimal receiver array direction for exploration.