• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.73-81
• /
• 2003

The Government presented improvement plans such as "Traffic Accident Frequent Point" and "Hazardous Roads" to reduce traffic accidents on the increase after 1980s. In case of the hazardous roads, they are expressed by grades which are marked by geometric elements such as width, radius, grade. sight distance. and other environmental factors. As each business for improving roads goes by only focusing on improvement of geometric elements, excessive expense can be invested too much nowadays causing economical waste. Therefore, as improvement plans approached by economic access are needed, this paper shows the cost-effective improvement of the business to keep safety related to traffic accident and economical waste. The hazardous roads which authorized by Gwang-ju National Road Preservation Office of Construction and Transportation Ministry in 1995 for business for improvement of roads, were investigated before 1999. First of all, estimating traffic accident models are presented by using existed data statistically. The models help to maximize traffic accident decrease through control of the presented factor. Secondly, optimum construction cost of improvement is presented to prevent overcapitalization. However, this paper is limited because it was difficult to sort the data with various areas and to approach various ways.

• Smart Media Journal
• /
• v.6 no.3
• /
• pp.89-94
• /
• 2017

The existing geofences provide only context-awareness service for entering or leaving the set region when a user sets a virtual region for his/her PoI(Point of Interest). Applying the mobile-geofence technology to the connected car technology, which is attracting attention as a next generation technology, it is possible to provide application service without additional infrastructure construction cost However, to do this, we need to expand and improve the functions of traditional geofence. In this paper, we propose and implement a flexible mobile-geofence in which the radii of each geofence applied to vehicles is changed according to context-aware in order to support connected cars technology based on the previously studied mobile three-dimensional geofence system. The proposed flexible mobile-geofence shows experimentally that the region of the geofence is changed according to context-aware of itself and its surroundings after applying a flexible decision algorithm by the flexible factor analysis. In the future, we are expected that the flexible mobile-geofence proposed in this paper will be applied not only to connected-cars technology but also to the application technology of V2X(Vehicle to Everything) for safe and efficient vehicle operation.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.125-138
• /
• 2011

The highway visibility reduction caused by fog is one of the major elements of traffic accidents. Though the fog warning systems can lead drivers into safe driving by letting them aware dangerous situations in advance, the optical sensors, such as fog sensor, has been extremely costly. Through recent studies, it is delivered that visibility measurements have become obtainable with relatively cheap cameras and their functionality is as similar as a driver' visual sense. Those measurements however require additional signs or ROI, so it is still costly and unable to utilize the conventional images from the existing systems. This study proposes a new method to detect the visibility in real time based on the conventional images from the existing CCTV cameras. The proposed method builds a road model and extracts and applies vehicle movements and visible lines - those highlight easy and quick visibility measurements. The proposed method has advantages of both (1) having possible day and night visibility measurements similar to drivers' visual sense and (2) being easily applied to the existing CCTV system without additional devices. This paper presents field experiments using images acquired from the Central Inland Expressway and discusses future research directions.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.28-34
• /
• 2014

Automatic transmission fluid (ATF) is used for automatic transmissions in the vehicle as the characterized fluid. Recently, the vehicle manufacture usually guarantee for fluid change over 80000~100000 km mileage or no exchange, but most drivers usually change ATF below every 50000 km driving in Republic of Korea. It can cause to raise environmental contamination by used ATF and increase the cost of driving by frequently ATF change. In this study, we investigate the various physical properties such as flash point, fire point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and metal component concentration for fresh and used ATF after driving (50000 km, 100000 km). The result showed that the total acid number, pour point, Fe, Al and Cu component had increased than fresh ATF, but 2 kind of used oil (50000 km and 100000km) had similar physical values and metal component concentration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.245-253
• /
• 2009

Road facility is the most fundamental infrastructure for traffic and various information for smooth traffic is included in road surfaces. Various information included in road surfaces should be often removed and reinstalled by partial damage and aging. In addition, the existing road surface information should be removed in order to mark new information as traffic information changes. The existing road surface removal method suing grinders and torches had problems such as dangerous working equipment and workers' direct exposure to cars. In addition, although water-jet system using super high-pressure water was used to remove road surface in order of improvement of traditional method, there are another problems such as limitations according to water-tanks and water frost on the road surfaces after work. Therefore, this study analyzes and suggests systems to develop prototype after analyzing dry ice blaster in order to improve the current road surface removal methods. In addition, the study analyzes the possibility of introduction of dry ice blaster through a test for proposing an automatized equipment for new road surface mark removal considering environment and work efficiency, and compare traditional method with introduced dry ice blaster for operating cost.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.119-130
• /
• 2009

The aim of this study is to analyze the effects of DVR(Driving Video Recorder) operation on decreasing the number of traffic accidents, the cost of traffic accident claim, and the behavioral change in drivers' driving. The data for this research are obtained from taxi drivers in Busan. For this, Structural Equation Model and two-way ANOVA are employed for empirical analysis. Overall results of this study show that the number of traffic accidents of 4 taxi corporations in Busan has decreased by average 32.7 percent after using DVRs. In addition, as to the cost of taxi accident claims, it is expected that the DVR operation has a considerable effect on economic benefits of taxi corporations. Moreover, this study could make clear the difference in behaviors between DVR users and non-users, and discriminate the positive and negative impacts of the DVR operation on the drivers' driving behavior. The study quantitatively examined the indirect impact of 'attitude', 'subject norm' and 'behavioral control' factors on planned 'behavior', and the direct impact of 'behavioral control' factor on the planned 'behavior'. This study suggests that they should add the video recoding function of DVRs when operation recorder(blackbox for the car) is obligatorily set up on cars for business by traffic security law.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.35-44
• /
• 2006

Acceleration and deceleration curves have been used for design purposes worldwide. The curve in design level has been regarded as an single deterministic curve to be used for design of climb lanes. It should be noted that the curve was originally made using ideal driving truck and that the curve is applied during design based on the assumption of no difference between ideal and real driving conditions. However. observations show that aged vehicles and lazy behavioring drivers nay make lower performance of vehicles than the ideal performance. The present paper provides the results of truck speeds at climbing lanes then probabilistic variation of acceleration and deceleration corves. For these purposes. a study about identification of vehicle makers, and weights for trucks at freeway toll gates and then observation of vehicle-following speed were performed. The 85%ile results obtained were compared with the deterministic performance curves of 180, 200, and 220 Ib/hp. It was identified that the performance of 85%ile results obtained from vehicle-following-speed observations were lower than one from deterministic performance curves. From these results, it may be concluded that at the beginning Point of climbing lanes additional $16.19{\sim}67.94m$ is necessary and that at the end point of climbing lanes $53.12{\sim}103.24m$ of extension is necessary.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.517-528
• /
• 2007

Domestic or international existing researches regarding rail damage factors are focused on laying, vehicle conditions, driving speed and driving habits and overlook characteristics of track structure (elasticity, maintenance etc). Also in ballast track, as there is no special lateral spring stiffness of track also called as ballast lateral resistance in concrete track, generally, existing study shows concrete track has 2 time shorter life cycle for rail replacement than ballast track due to abrasion. As a result of domestic concrete track design and operation performance review, concrete track elasticity is lower than track elasticity of ballast track resulting higher damage on rail and tracks. Generally, concrete track has advantage in track elasticity adjustment than ballast track and in case of Europe, in concrete track design, it is recommended to have same or higher performance range of vertical elastic stiffness of ballast track but domestically or internationally review on lateral spring stiffness of track is very minimal. Therefore, through analysis of service line track on site measurement and analysis on performance of maintenance, in this research, dynamic characteristic behaviors of commonly used ballast and concrete track are studied to infer elasticity of service line track and experimentally prove effects of track lateral spring stiffness that influence curved rail damage as well as correlation between track elasticity by track system and rail damage to propose importance of appropriate elastic stiffness level for concrete and ballast track.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.1
• /
• pp.32-41
• /
• 2012

Greenhouse gases (GHGs) emissions from Kangwon National University was estimated to be 21,054 ton $CO_2$-eq in 2009, which was approximately 7% higher than that in 2005. Emissions from electricity usage in Scope 2 contributed to the upward annual trend of GHG emissions, comprising about 54.3% of the total GHG emissions. On the other hand, GHG emissions from Scope 1 and Scope 3 contributed approximately 25.3% and 20.4%, respectively. Various GHG reduction plans were also introduced and evaluated in this study. Among three reduction plans including LED substitution, improvement of transportation efficiency, and green campus action plan, the green campus action plan derived the most significant GHG reduction of 5.3% of total emissions. Estimated total reduced GHG emission was $1,570ton\;CO_2-eq\;yr^{-1}$ with all three reduction plans.

• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.55-63
• /
• 2022

In recent years, with the rapid development of large and medium-sized urban rail transit in China, the total operating mileage of high-speed railway and the total number of EMUs(Electric Multiple Units) are rising. The system complexity of high-speed EMU is constantly increasing, which puts forward higher requirements for the safety of equipment and the efficiency of maintenance.At present, the maintenance mode of high-speed EMU in China still adopts the post maintenance method based on planned maintenance and fault maintenance, which leads to insufficient or excessive maintenance, reduces the efficiency of equipment fault handling, and increases the maintenance cost. Based on the intelligent operation and maintenance technology of PHM(prognostics and health management). This thesis builds an integrated PHM platform of "vehicle system-communication system-ground system" by integrating multi-source heterogeneous data of different scenarios of high-speed EMU, and combines the equipment fault mechanism with artificial intelligence algorithms to build a fault prediction model for traction motors of high-speed EMU.Reliable fault prediction and accurate maintenance shall be carried out in advance to ensure safe and efficient operation of high-speed EMU.