• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.22-28
• /
• 2011

This paper presents an active roll motion control of a passenger vehicle. The roll controller is designed in the framework of $H_{\infty}$ control scheme based on the 3 DOF vehicle model taking into consideration parameter variations, which affect the roll dynamics, and unmodeled high frequency dynamics for robustness and performance. In order to investigate the feasibility of the active roll control system in a car, its performance is evaluated by simulation in a full vehicle model with nonlinear tire characteristics under various operating conditions. Finally, in order to enhance the performance in a transient region taking into account the limited bandwidth of the actuating module, a hybrid control strategy is presented.

• 한국정보통신학회논문지
• /
• 제21권10호
• /
• pp.1879-1885
• /
• 2017

본 논문에서는 시간에 따라 방향 속도와 위치가 변하는 무인자동차의 궤적 추적 제어시스템에 대해 논한다. 무인자동차는 운전자의 도움이 없어도 스스로 주위환경을 인식하여 지정된 도로를 주행할 수 있는 자동차로 올바른 주행을 위해 고려해야 할 변수가 다양하다. 무인자동차의 궤적 추적 시스템에서 인식한 정보는 이산적인 값을 가지므로 센스 간의 간격으로 인하여 비연속성 및 비선형성을 가지고 있다. 이로 인하여 목표 궤적을 정확하게 추적하는 것 어렵다. 본 논문은 차량의 운동학 모델링을 통하여 선형오차, 제약 조건, 제어 목표함수의 세 가지 조건을 갖는 무인자동차 궤적 추적시스템을 제안한다. 제안된 궤적 추적시스템을 기반으로 동적 시뮬레이션 소프트웨어-카심(Dynamic Simulation Software-CarSim)의 결합시뮬레이션을 통해 시스템의 성능을 평가하였고, 그 결과로 더욱 정밀하게 목표 궤적을 추적할 수 있음을 확인하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.1173-1174
• /
• 2023

Shock Absorber 는 Suspension 부품 중 하나로 감쇠력을 통해 스프링의 수축을 제어함으로써 차량의 승차감 및 안정성을 향상시키는 장치이다[1]. 그러나, 스프링의 상하운동을 억제하기 위해 Shock Absorber 가 압축·인장 됨으로써 소음이 발생하여 탑승객을 불편하게 한다. 본 논문에서는 이에 대한 계측을 통해 원인을 파악하고 NVH 를 개선하여 승차감 향상을 도모한다.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.701-705
• /
• 2014

This article presents a comparison among several yaw and roll motion controllers for vehicle rollover prevention. In the previous research, yaw and roll motion controllers can be independently designed for rollover prevention. Following this idea, several yaw and roll motion controllers are designed and compared in terms of rollover prevention. For the yaw motion control, PID, LQR, SMC (Sliding Mode Control) and TDC (Time-Delay Control) are adopted. For the roll motion control, LQR, LQ SOF (Static Output Feedback) control, PID, and SMC are adopted. To compare the performance of each controller, simulation is performed on a vehicle simulation package, CarSim$^{(R)}$. From simulation, TDC and LQ SOF are the best for yaw and roll motion control, respectively.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.958-966
• /
• 2010

In this paper, we have proposed a integrated dynamic control architecture in 6WD(wheel drive)/6WS(wheel steering) vehicle for military applications. Since 6WD/6WS vehicle has inherent redundancy, the input variables to make any desired vehicle motion can not be determined uniquely. Therefore, optimal distribution method of tire forces is introduced, which is based on workload of each tire. Simulation result shows that this is effective for the energy minimization and dynamic performance enhancement. We also suggest how the integrated control with any failure mode should be reconstructed.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.22-27
• /
• 2022

An integrated front steering system and front brake system (FSFB) is developed to improve the stability and controllability of an SUV. The FSFB simultaneously controls the additional steering angle and front brake pressure. An active front steering system (AFS) and an active front brake system (AFB) are designed for comparison. The results show that the FSFB enhances the lateral stability and controllability regardless of road and running conditions compared to the AFS and AFB. As a result, the yaw rate of the SUV tracks the reference yaw rate, and the side slip angle decreases. In addition, brake pressure control is more effective than steering angle control in improving the stability and steerability of the SUV on a slippery road. However, this deteriorates comfort on dry or wet asphalt.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.70-75
• /
• 1997

This paper proposes a new approach to the design of fuzzy-neuro control for track vehicle system using fuzzy logic based on neural network. The proposed control scheme uses a Gaussian function as a unit function in the neural network-fuzzy, and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized learning architecture. It is proposed a learning controller consisting of two neural network-fuzzy based of independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is illustrated by simulation for trajectory tracking of track vehicle speed.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.15-20
• /
• 2012

This study is to propose and develop an integrated dynamics control system to improve and enhance the lateral stability and handling performance. To achieve this target, we integrate an AFS and a 4WS systems with a fuzzy logic controller. The IDCS determines active additional steering angle of front wheel and controls the steering angle of rear wheel. The results show that the IDCS improves the lateral stability and controllability on dry asphalt and snow paved road when double lane change and step steering inputs are applied. Yaw rate of the IDCS vehicle tracks reference yaw rate very well and body slip angle is reduced about by 50%. Response time of the IDCS vehicle is also decreased.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.190-198
• /
• 1999

Continuously controlled semi-active suspension system may improve ride and handling properties. Here, as a mechanism to control the fluid flow solenoid valve mechanism is introduced and added to the basic passive damper to create damping forces of the shock absorbers. The system may produce continuously controlled damping forces in both solenoid valve only and combination with passive shock absorber including fluid flow is studied, and then the combined model is added to the full vehicle model to evaluate its ride and handling performance. Finally, the simulation results are compared to the vehicle models having similar suspension system.

• 한국철도학회논문집
• /
• 제17권4호
• /
• pp.233-244
• /
• 2014

이 연구에서는 자기부상열차-가이드웨이 상호작용 해석기법을 현장에서 계측된 자료를 활용하여 검증한다. 자기부상열차의 차체와 대차는 병진운동과 회전운동을 하는 강체 질량으로 모사한다. 대차의 부상전자석에서 발생하는 부상력은 능동 제어 알고리즘에 의해 제어된다. 가이드웨이는 Euler-Bernoulli beam을 사용하여 수치 모형을 구성한다. 대차의 회전 운동으로 인한 부상공극의 변화와 가이드웨이에 작용하는 위치의 변화를 엄밀히 고려하여 자기부상열차-가이드웨이 상호작용계의 동적거동 해석을 수행한다. 인천공항 자기부상철도 노선에서 계측된 실측 자료를 이용하여 해석기법을 검증한다. 해석 결과와 현장 계측 결과의 비교를 통해 해석 기법의 정확성을 검증하고, 대상 구조물이 설계 기준을 만족하도록 안전하게 설계되고 시공되었음을 확인한다.