• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.47-51
• /
• 2010

A vehicle classification data is essential for traffic road planning and pavement. In this study, the vehicle height, vehicle criteria for classification applied to measure the height of the car driving has devised a way to install equipment. It is capable of measuring the vehicle height was confirmed to field experiments, the measurement system is obtained to the vehicle length and height data. In this experiment, results showed the accuracy of 88.6% compared to classification data using the discriminant function obtained from video replaying. The height of vehicle applying the classification criteria can be utilized to determine the vehicle class.

• Journal of Practical Engineering Education
• /
• v.16 no.3_spc
• /
• pp.391-399
• /
• 2024

All highway toll gates in Korea use low-speed WIM(Weight-In-Motion) to block overloaded cargo vehicles from entering the main highway, but some cargo vehicle owners are illegally modifying vehicles to operate variable axles and evading crackdowns by manipulating the axles. In previous studies detect all tires of a running vehicle were detected to determine whether there is axle manipulation. However, because the vehicle entry area at the highway toll gate checkpoint is very narrow, there is a problem that it is realistically difficult to film all tires of the entering vehicle in one video frame. In this paper, we proposed a system that can determine whether the axle is being operated through changes in the height of the vehicle's cargo box rather than by detecting tires. To detect changes in the height of a cargo box, we propose a method to extract the representative line of the cargo box using Hough transform and then measure the change in height of the representative line to detect the change in height of the cargo box. In addition, we propose a method to detect changes in the vertical height of a cargo box by accumulating motion vectors of pixels within a certain area of the image using optical flow. And the two methods were compared and their advantages and disadvantages were analyzed and presented.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.30-33
• /
• 1997

차량의 제동에 의한 기존의 연구는 차량의 bounce와 pitch에 의한 차량의 거동특성에 따른 고려만이 이루어져 왔으며 교량의 수직방향 offset에 의한 고려는 이루어지지 않았다. 여기서 교량의 offset이란 교량의 주형과 상판 그리고 교좌부의 중심간에 수직방향 높이의 차이를 말하며, 차량의 제동이 발생할 때 이러한 offset에 의한 추가적인 휨거동이 발생하므로 이러한 offset을 고려하여야 한다. 아울러 고속철도와 같은 중차량의 경우에는 교각의 상대적인 강성에 의한 효과도 고려되어야 할 것이다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.279-282
• /
• 2000

물류시스템설계 및 개선의 일환으로 차량운송계획 문제는 매우 중요시되는 분야이다. 본 연구는 유전자 알고리즘을 이용한 통합물류 운송계획문제(Integrated Vehicle Routing Problem : IVRP)를 위한 전산화 모델의 개발로서 운송 중인 차량의 자동위치 조회시스템(Automatic Vehicle Location System : AVL)을 이용하여 차량운송의 통제기능을 높이며, 차량운송 효율을 높이는 목적으로 VRP문제와 AVL문제를 연계하는 통합운송시스템의 개념 연구이다. 본 연구에서는 다-물류센터를 고려한 운송 영역할당(Sector Clustering), 경로계획 문제(VRP) 및 유전자 알고리즘을 이용한 운송순서 계획(GA-TSP)을 고려한 통합운송계획모델의 개발을 목적으로 차량의 운송간의 통신 및 통제 등의 기능을 위하여 위치 추적을 가진 GPS와 통신시스템을 위한 TRS 및 위치설정을 위한 GIS를 고려하였다. 본 연구에서의 AVL시스템 개발을 위한 GPS, GIS 및TRS 등 AVL시스템의 구성요소에 대하여 그 개요를 조사 연구하였다. 또한 GPS, GIS을 기반으로한 물류시스템의 구성과 시스템에 필요한 기능 및 구성요소를 파악하고 서브 시스템을 구성하여 각 서브 시스템의 기본설계를 실시하기 위한 연구이다.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.508-516
• /
• 2008

• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.197-206
• /
• 1995

Microphone array is designed to measure the equivalent source height of vehicle noise. The equivalent source position is defined for an arbirary distribution of acoustic sources above a perfectly reflecting plane and a microphone array for its measurement is developed. The normalized errors of the measured equivalent source heights are defined including the effects of background noise, the geometric near field, and source size. Normalized errors of the measured source heights obtained by a nemerical simulation for each parameter lead to optimization of the microphone spacing and to the design of an array which gives the equivalent source height as a function of frequency. The performance of the designed array is verified using the stationary loudspeaker experiments.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.139-149
• /
• 2019

For retaining wall designs, horizontal earth pressure induced by traffic loads over the walls is calculated based on equivalent uniform pressure height. The AASHTO LRFD design standards propose equivalent uniform pressure height of traffic loads; however, the equivalent uniform pressure height is calibrated using the US standard trucks. As the domestic standard trucks are different from the US standard trucks, in this study, new domestic equivalent uniform pressure height is proposed using the Boussinesq theory varying vehicle directions, Poisson's ratios of pavement layers, and retaining wall height. The proposed equivalent uniform pressure heights are generally higher than those proposed by the AASHTO design standards because the axle loads and their densities of two domestic standard trucks are higher than those of the US standard trucks. The most highest equivalent uniform pressure height was found for traffic direction perpendicular to longitudinal direction of retaining wall.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.47-52
• /
• 2011

Vehicle classification data are considerably used in the almost all fields of transportation planning and engineering. Highway agencies use a large number of vehicle classification schemes. Vehicles on the national highway are classified by 12-Category classification system, using number of axles, distances between axles, vehicle length, overhang, and other factors. In the case of using existing axle-sensor-based classification counters (that is, 12-category classification system), two-axle vehicles(Class 1 to 4) can be erroneously classified because a passenger vehicle becomes larger and similar with class 3 and 4. In this reason, this study proposes the vehicle classification scheme based on using vehicle height profiles obtained by a laser sensors. Also, the accuracy of the proposed method are tested through a field study.

• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.457-460
• /
• 2010

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.772-774
• /
• 2012

최근 차량과 플랫폼 사이의 공간에 휠체어의 바퀴 또는 승객의 발이 빠지는 등의 안전사고가 보고되고 있어 교통약자의 이동을 제한하는 요소로 작용함에 따라 차량과 플랫폼 사이 공간을 메우는 안전스텝을 개발하게 되었다. 안전스텝으로 기존 플랫폼에 설치하는 고무타입은 고정식 고무발판을 미리 설치해 두어 차량과 플랫폼의 간격을 미리 줄이는 방식이나 직선, 곡선 형태의 각각의 역사가 가지는 조건에 유연하게 대응하고, 차량의 승객수와 플랫폼의 조건에 따라 달라지는 승하차 높이에 유연하게 대응하고자 차량에 설치하는 방식을 개발하게 되었다. 본 논문에서는 개발한 안전스텝의 구성 및 기능을 설명하고 논하고자 한다.