• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.468-474
• /
• 2019

Korea had the highest accident rate among OECD countries in 2018, with 8.4 per 100,000 population, ranking 4th among 35 countries. In addition, the accident rate of traffic with children and the elderly was also high. This study reviewed the relevant literature and analyzed the traffic-accident analysis system. Customized traffic safety facilities were developed. In addition, by measuring the visibility of the traffic safety facilities by installing a test bed, this study measured the forward driving frequency and vehicle driving speed while driving. As a result of applying the "pedestrian pedestrian model" collision test model, the possibility of serious injury after installing the facility was reduced greatly to 4.6%. In this study, the visibility of traffic safety facilities and the effect of reducing the traffic speed were verified through test beds. Recognizing traffic safety facilities will reduce traffic accidents.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.227-235
• /
• 2018

In this study, we developed a relational formula for observing high - resolution rainfall using vehicle rain sensor. The vehicle rain sensor consists of eight channels. Each channel generates a sensor signal by detecting the amount of rainfall on the windshield of the vehicle when rainfall occurs. The higher the rainfall, the lower the sensor signal is. Using these characteristics of the sensor signal generated by the rain sensor, we developed a relational expression. In order to generate specific rainfall, an artificial rainfall generator was constructed and the change of the sensor signal according to the variation of the rainfall amount in the artificial rainfall generator was analyzed. Among them, the optimal sensor channel which reflects various rainfall amounts through the sensitivity analysis was selected. The sensor signal was generated in 5 minutes using the selected channel and the representative values of the generated 5 - minute sensor signals were set as the average, 25th, 50th, and 75th quartiles. The calculated rainfall values were applied to the actual rainfall data using the constructed relational equation and the calculated rainfall amount was compared with the rainfall values observed at the rainfall station. Although the reliability of the relational expression was somewhat lower than that of the data of the verification result data, it was judged that the experimental data of the residual range was insufficient. The rainfall value was calculated by applying the developed relation to the actual rainfall, and compared with the rainfall value generated by the ground rainfall observation instrument observed at the same time to verify the reliability. As a result, the rain sensor showed a fine rainfall of less than 0.5 mm And the average observation error was 0.36mm.

• Journal of Practical Engineering Education
• /
• v.14 no.3
• /
• pp.593-600
• /
• 2022

Various sensors such as lidar, radar, and camera are fused and used in autonomous vehicles. Rider and radar sensors are difficult to popularize because they are expensive equipment. In order to popularize autonomous vehicles, research that can replace expensive equipment is continuously being conducted. In this paper, we use a single camera that is inexpensive and can be easily mounted. We propose a method for detecting the wheels and adjacent lanes of a front-side vehicle of a driving vehicle and estimating distances. Our proposed method detects lanes and wheels from frame images after frame extraction via input images. In addition, the distance is measured and compared with the actual distance measured in the actual road environment. The distance could be calculated relatively accurately within the error range of ± 3 cm. Through this, it is expected that the camera can be used as an alternative means when the cost of autonomous vehicles is reduced or when the lidar or radar sensor fails.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.789-792
• /
• 2008

Actually, The present traffic accident detection system is subsisting limitation of accurate distinction under the crowded condition at intersection because the system depend upon mainly the image information at intersection and digital image processing techniques nearly all. To complement this insufficiency, this article aims to estimate the level of present technology and a realistic possibility by analyzing the acoustic characteristic of crash sound that we have to investigate for improvement of traffic accident detection rate at intersection. The skid sound of traffic accident is showed the special pattern at $1[kHz]{\sim}3[kHz}$ bandwidth when vehicles are almost never operated in and around intersection. Also, the frequency bandwidth of vehicle crash sound is showed sound pressure difference over 30[dB] higher than when there is no occurrence of traffic accident below 500[Hz].

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.8
• /
• pp.62-69
• /
• 1999

This paper presents a vision-based real-time traffic surveillance system. Current research in machine vision applied to traffic is due to its potential for more powerful process, its flexibility and its lower cost. Our traffic surveillance system consists of FPA and TSM on the Internet. The FPA provides image data, vehicle speed and vehicle density for the TSM. Traffic parameters, the vehicle speed and density, are extracted over many frames using differences between the sampling points of a background image and those of incoming frames. The FPA works by just processing groups of pixels without any understanding of the image. Although this system has an accuracy limitation, it can be used in applications requiring an approximate vehicle density and vehicle speed in real-time.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.49-56
• /
• 2011

One of the most important VANET applications is providing active safety by broadcasting emergency messages. In order to prevent broadcast storm of flooding-based broadcasting scheme in which any node receiving message will rebroadcast, the existing protocols use the different methods to limit the number of relay nodes. Nevertheless, the existing protocols have low delivery ratio with high traffic density and cause message overhead. Currently, the dramatic increase in the number of vehicles equipped with Global Positioning System (GPS) and onboard radar created new application scenarios that were not feasible before. Consequently, we proposed a broadcasting protocol that selects relay node by using GPS-based position information and detecting neighboring vehicles with the help of onboard radar to. Simulation results show that our proposed protocol has better performance than the existing schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2008-2015
• /
• 2010

Ns-2 is a proven simulator which is widely utilized to evaluate the performance of wired and wireless network. Ns-2.33 version introduced the extended version including the modules which the core functions of existing 802.11 PHY and MAC layer are implemented. However, if the error rate, one of most important parameters to evaluate a performance of wireless network, is applied to the extended version, the simulation is ceased with several fatal errors. Furthermore, a packet error is detected and discarded on MAC layer in the traditional protocol architecture, but there is the problem which can't identify information about a packet with error by processing packet error on PHY layer in this version. In this paper, we modify the extended version to resolve the above mentioned problems. And also we perform ns-2 simulation using the modified version on the IEEE 802.11p based vehicular ad-hoc networks, and then analyze effects of error rate.

• Journal of Korea Game Society
• /
• v.15 no.5
• /
• pp.131-142
• /
• 2015

A self-driving car is an autonomous vehicle capable of fulfilling the main transportation capabilities of a traditional car. It must be capable of sensing its environment and navigating without human input. In this paper, we design the agent that can simulate these self-driving cars and develop a prototype for it. To do this, we analyze the requirements for the self-driving car, and then the agent is designed to be suitable for traditional multi-agent system. The key point of the design is that agents move along the steering forces only. The prototype of the designed agent was implemented by using Unity 3D. From simulation results using the prototype, movements of the agents were very realistic. However, in the case of increasing the number of the agent the performance was seriously degraded, and so the alternatives of the problem were suggested.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.535-542
• /
• 2011

The Global Navigation Satellite System(GNSS) is being utilized in numerous applications. The research for autonomous guided vehicles(AGVs) using precise positioning of GNSS is in progress. GNSS based AGVs is useful for setting driving path. This AGV system is more efficient than the previous one. Escipecially, the obstacle is positioned the driving path. Previcious AGVs which follow marker or wires laid out on the road have to stop the front of obstacle. But GNSS based AGVS can continuously drive using obstacle avoidance. In this paper, we developed collision avoidance system for GNSS based AGV using laser scanner and collision avoidance path setting algorithm. And we analyzed the developed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.485-492
• /
• 2010

Intelligent Transport System(ITS) has been studied in various systems, such as road environment information offering, vehicle short-range wireless/wire communication, vehicle collision preventing and pedestrian safety offering systems. Related to this, the USN technology based on the sensing accuracy for motorists and pedestrians safety, the information reliability, the maintenance and convenience for Sensor Network is highlighted. This study uses various sensors to construct USN to the road, and connect it to the developed RSU so it collects the real-time road environment information and offers it to OBU and Traffic Control Surveillance Center with Road Weather Information System. RSU collects roadside information for driver's safety and analyzes it to offer IP and beacon service according to the service priority to OBU & upper layer terminal. In the upper layer terminal it is developed the IP based Settop Box application program to offer the urban traffic information & road environment, and environment sensor error, etc. Finally, RWIS develops the real-time collection of roadside information to complement the driver's safety to the intelligent traffic system, and presents various service modes with technology convergence.