• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.42-47
• /
• 1999

Based on characteristics of resonator in BPF, a resonant characteristic is obtained by using variation of characteristic impedance in rectangular waveguide. And we have designed and made a novel waveguide BPF with this phenomenon. This filter can be made with arbitrary lengths of rectangular waveguide resonators.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.275-277
• /
• 2014

본 논문에서는 다양한 주파수 튜닝이 가능한 직접변환방식을 이용한 Gm-C 능동필터 회로를 설계하였다. 설계된 필터는 집적회로를 튜닝하여 요구되는 기준주파수 및 대역폭과 이득을 만족시킬 수 있다. 필터에 사용된 OTA회로는 전달 트랜스컨덕턴스 값을 외부전압으로 제어할 수 있도록 설계하여 다양한 주파수대역에서 사용할 수 있다는 장점을 가진다. 설계된 필터는 ripple 전압을 최소화 하고 이득 값을 높일 수 있는 Elliptic 필터를 사용하였다. 집적화를 위하여 수동필터를 능동필터로 변환할 수 Gyrator 방식을 이용하였다. HSPICE 시뮬레이션 결과, 외부전압을 1.0V~1.9V까지 변화를 주었을 때 1.4MHz ~ 2.8MHz의 차단주파수의 조정이 가능하였고 소비전력은 4.5mW~20mW임을 측정하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1485-1492
• /
• 1994

In this paper, we design and implement the Combline Bandpass Filters for the satellite transponder by using the least-squares curve-fitting method. The Combline Bandpass Filters are located front of the mixer and behind of it, which is the component of down converter. Comparing with the filters which have $\lambda$/4 resonance length. Combline Filter has wide range of stop-band by using $\lambda$/8. So, it is useful to the satellite transponder owing to its low mass and small size. The filters described are realized as coupled rectangular coaxial transmission lines. The choice of this type is due to the ease of machining and wide variations in coupling coefficients rather than the use of the round rod resonators. We determine 800 MHz bandwidths for the combline bandpass filters. By using Chebyshev filter function, we design and implement 4-pole combline filters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.24-29
• /
• 2015

In this paper, we propose a method of isolation improvement for broadband antennas using a high-permeability substrate. The substrate is applied for a planar monopole antenna based on near-field analysis to maintain radiation characteristics at its operating frequency while improving isolation by minimizing mutual coupling with nearby antennas at other frequency bands. To verify isolation improvement, we compare performance variations of $S_{21}$ according to the existence of the substrate using the proposed antenna and a reference antenna whose operating frequency is 2 GHz. As a result, the radiation characteristics are maintained, and $S_{21}$ performance is improved by more than 5~10 dB in the frequency band of greater than 2 GHz, which demonstrates the isolation can be improved by using the high-permeability substrate.

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.196-199
• /
• 2001

차량 실내소음의 주요 음원은 엔진과 그 주변부에 있다. 엔진에서 발생되는 소음을 차단하여 차실내 소음수준을 개선하기 위하여 엔진룸과 차실과 경계면을 이루고 있는 대시(dash)부의 차음성능이 중요하다. 특히, 음질을 결정하는 주파수 대역인 250Hz 이상의 소음을 제어하기 위하여 다양한 대시 판넬 뿐만 아니라 대시 판넬 전후에 다층구조의 차음재를 부착한다.(중략)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.34-41
• /
• 2006

This paper presents a CMOS multi-mode baseband filter architecture to support PDC/GSM/EDGE/WCDMA and its new automatic tuning method. 5-th order Chebyshev low pass filter is designed for implementing the baseband channel-select filter. Capacitors and resistors were shared efficiently between modes to minimize the area. And, the new cut-off frequency tuning method is proposed to compensate the process variation. This method can reduce the area and the noise level due to MOS switches.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.7
• /
• pp.693-700
• /
• 2008

High-Pressure gas Pipeline which is buried in underground has the Possibility that will be exposed to unexpected dangerous impact of construction equipment. To protect from this kind of danger, the real-time health monitoring system of the high-pressure gas pipeline is necessary. First of all, to make the real-time health monitoring system clearly, the acoustic wave propagation characteristics which are made from various construction equipment impacts must be identified. In link of technical development that prevents the damage of high-pressure gas pipeline, this paper gives FEM(finite element method) and BEM(boundary element method) solutions to identify the acoustic wave propagation characteristic of the various impact input signals which consist of Direc delta function and convolution signal of 45 Hz square signal and random signal.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.447-452
• /
• 2008

In the paper, the product-type PLL system, which is so suitable for synchronizing a single phase grid voltage is designed. The PLL system is modelled with the small signal analysis. Both the cut-off frequency of low pass filter and the optimal gain are derived by considering the transient response for synchronization as well as a distortion of synchronization signal. Through the simulation studies and experimental results, the transient response and ripple component of synchronization signal are investigated with a variation of both the cut-off frequency and gain in order to verify the performance of design.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.911-916
• /
• 2018

Among the various microwaves, the microwaves that we are using in our life are the things that combined with the information on what we need with various technologies. However, the signals that we do not want to get as an information is just noise. Therefore, we need to collect only the necessary information, and other information needs to be blocked. This technology is called Jamming. In this paper, the Partial-Band Jamming System through the Helical Antenna about target 95.1 and 97.3MHz in 88Mhz to 108MHz of the FM radio frequency band was studied.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.10-17
• /
• 2010

The interaction of oblique incident waves with a porous dual semi-cylindrical structure is investigated under the assumption of linear potential theory. The porous dual semi-cylindrical structure consists of two concentric bottom-mounted cylindrical structures that are porous in front half and transparent in back half. By changing porosity, gap, and wave characteristics(wave frequencies, incidence angle), the wave blocking performance as well as the wave loads and the wave run-up are obtained. As a convenient measure of overall wave blocking performance, the root mean square(R.M.S.) of the wave elevation in a sheltered region is used. It is found that the porous semi-cylindrical structure may significantly reduce the wave response in a sheltered region and the wave forces decrease largely compared to the impermeable structure. The dual structure is more effective in reducing the wave response in a sheltered region than the mono type in the region of high frequencies.