• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.248-259
• /
• 1995

고리 3호기 원자로를 대상으로 압력용기에서의 고속중성자 집적량을 계산하였다. 수송계산에는 2차원 각분할 수송코드인 DOT 4.3을 사용하였고 핵단면적 라이브러리는 ENDF /B-II와 ENDF /B-III를 근거로 한 CASK와 ENDF /B-IV를 근거로 한 BUGLE80, 고리고 ENDF /B-Ⅵ를 근거로 한BUGLE93 등이다. 사용한 핵단면적에 따른 압력용기에서의 고속중성자속 분포를 살펴보고 최근에 배포된 BUGLE93 라이브러리의 Dosimeter File을 사용하여 1, 2차 감시시험에서 측정된 중성자 측정시료의 방사능으로부터 계산된 고속중성자속 측정치를 계산된 고속중성자속과 비교하였다. 이 비교를 통하여 압력용기에서의 고속중성자속과 수명기간동안의 고속중성자 집적량을 평가하였다.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.59-66
• /
• 1999

원자력발전의 고유한 문제점을 해결할 수 있는 새로운 집적폐회로형 AMBIDEXTER 원자력시스템 개념을 제안하였다. 이 복합시스템은 일체형 원자로를 중심으로 열/에너지 변환회로와 방사선/물질 수송회로를 서로 독립적으로 구성하므로 최소 방사선 위험부담 아래서 원자력에너지의 잇점을 극대화하는 설계이다. 특히 방사선/물질 수송회로로부터 분리된 고준위 방사성 폐기물에서 고부가가치 동위원소나 방사선원을 선별적으로 용이하게 추출, 활용할 수 있다. 원자로 계통은 얇고 큰 Hastelloy 합금 원자로용기 내부를 노심, 침니, 열교환기, 다운캄어 및 입구플레넘 콤파트먼트로 분할하여 배관이나 벨브관이 없으므로 기기파손으로 인한 방사성물질의 대량 외부 누출은 불가능하다. Th/233U 용융염핵연료의 핵물리 및 열수력학적 특성을 살려 AMBIDEXTER 노심의 핵적 자활성 설계에 융통성을 부여하는 변성핵연료주기를 도입하면 핵연료자원의 공급 안정화나 핵확산방지의 투명성 제고에 큰 효과가 있다. AMBIDEXTER 설계연구에 관련된 핵심기술들은 일찍이 미국 ORNL에서 시작한 MSR 프로그램을 통해 개발되어 이미 대부분 상용화하고 있기 때문에 현재 추진 중인 250 MWth급 원형로 모듈의 개념개발에서는 주로 시스템 통합에 관한 문제들이 중점적으로 다루어진다.

• Journal of Korea Foundry Society
• /
• v.28 no.4
• /
• pp.175-178
• /
• 2008

우주선, 항공기, 수송차량 등은 기능은 집적 다양화 그리고 성능의 고도와 됨에 따라 에너지 효율성을 위해 구조부재의 경량화가 중요성은 증가되고 있다. 경량화 구조부재 재료 중에는 알루미늄 합금, 세라믹, 복합재료 등이 개발되어 우주선, 항공기, 수송차량 구조부재에 적용하기 위한 많은 연구가 이루어지고 있다. 이들 중, 20세기 초 알루미늄합금이 초 경량화 구조부재로서 많이 이용되었다. 본 논문에서는 경량화 재료 중 이방성을 가지는 복합재료를 구조부재에 적용하였다. 그러나 구조부재에 적용되기 위한 이방성 복합 재료는 강한 충격 이후 취성의 특징 때문에 하중과 흡수에너지가 급속히 감소하는 단점을 가지고 있다. 그래서 이방성 복합재료의 각 층간을 완전히 접합하여 성질이 매우 우수한 부재를 제작할 수 있는 Autoclave 성형법으로 제작하였다. 이방성 복합재료 중 CFRP를 설계 메커니즘 변수에 따라 Autoclave 성형을 하고 하중과 흡수에너지가 높음 평가하기 위해 굽힘실험을 하였다.

• 전기의세계
• /
• v.35 no.11
• /
• pp.716-721
• /
• 1986

디지틀기술은 근래에 들어서 반도체 집적회로와 이용기술의 비약적인 발전에 따라 각종분야의 정보를 검출해서 전송처리하는데 고신뢰도, 고정도, 고속도화 시키고 제반장치의 소형화하는데 필수적으로 이용되고 있다. 특히 전력분야에서도 최근 경제활동을 고도화와 다양화가 진행됨에 따라서 종래보다 더욱 고품질의 전기를 생산 수송하기 위해 전력계통운용에 필요한 정보나 장치가 디지틀기술의 적용이 불가피한 실정이다. 이미 도입 신설되는 발전계통 이외에도 개설되어 있는 급전, 송변전, 배전계통을 망라해서 정보처리나 송신등이 디지틀방식으로 전환 추진되고 있다. 본고에서는 현재 이러한 전력계통에서 적용되고 있는 디지틀기술의 현황과 동향에 대하여 기술하였다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.127-135
• /
• 1999

Grain-size distribution and accumulation rate of surface sediments on the tidal flats in Hampyong Bay, southwestern coast of Korea, were investigated in a sequential interval of 2 months for the period of 27 months (1994. 10~1996. 12). Seasonal variation of grain-size distribution is prevalent on the Shimock tidal flat in the southern side of the innerbay, rather than the Anarc tidal flat in the northern side around the baymouth. This variation, in particular, more distinctive in the areas around the both high and low tide water levels. The Shimock tidal flat shows typical seasonal variation of sedimentary processes, expected under monsoonal climate. Deposition of tine-grained sediments in summer dominates over erosion in winter, resulting in an annual accumulation rate of 3.7 mm/yr. In contrast, sedimentary processes on the Anarc tidal flat is abnormal that have experienced slight deposition of fine-grained sediments in the winter and severe erosion in the summer time, showing a negative annual accumulation rate of -49.6 mm/yr. Erosional processes in this area is interpreted due mainly to change of strength and direction of tidal currents, caused by the artificial construction of dyke for reclamation in the mid-tidal flat. As a result, It is immoderate to conclude whether sedimentary processes of Hampyong Bay is erosional or depositional at current situation. Further studies on sedimentary budget at the entrance to the bay are needed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2004

The summer distribution of $Cha-{alpha}$ and physical processes for simulating outbreak region of red tide were estimated by the Eco-Hydrodynamic model in Chinhae Bay. As a result of simulation of surface residual currents, the southward flow come in contact with the northward flow at the inlet and western part of bay in case of windlessness and below wind velocity 2 m/sec. As wind velocity increases, the velocity and direction of currents were fairly shifted. The predicted concentration of $Cha-{alpha}$ exceeded 20 mg/㎥ in Masan and Haengam Bays, and most regions were over 10 mg/㎥, which meant the possibility of red tide outbreak. From the results of the contributed physical processes to $Cha-{alpha}$, accumulation sites were distributed at the northern part of Kadok channel, around the Chilcheon island, the western part of Kajo island and some area of Chindong Bay. On the other hand, inner parts of the study area such as Masan Bay were estimated as the sites of strong algal activities. Masan and Haengam Bay are considered as the initial outbreak region of red tide by the modeling and observed data, and then red tide expanded to other areas such as physical accumulation region and western inner bay, as depending on environmental variation. The increase of wind velocity led to decrease of $Cha-{alpha}$ and enlargement of accumulation region. The variation of intensity of radiation and sunshine duration caused to rapidly fluctuation of $Cha-{alpha}$: however, it was not largely affected by the variation of pollutant loads from the land only.

• Journal of the Economic Geographical Society of Korea
• /
• v.3 no.1
• /
• pp.5-20
• /
• 2000

Recently as globalization of financial capital is progressed, possibility of crisis and unreliability of world economy is more growing. Korean economy required radical restructuring because of the financial crisis and the economic changes occurred in that process. This study is to explain the economic changes of Gwanagju city is produced by the financial crisis of Korean economy The most important industries are service and transportation equipment in Gwangju city. These industries began to decrease after financial crisis but machinery equipment, electrical machinery & electronics and rubber goods & plastic industry is growing relatively. Because of the decrease of service, the economy of inner city which service industry relatively agglomerated in is reducing. And agglomeration space for the optical photonics industry was built up by the upbringing policy of government on high-technology industry to overcome the economic crisis and micro industrial space such as venture building and establishment nursery center was built up. But high-technology industries have many geographical limits to embed in Gwanagju city, so there needs to construct regional innovation system for knowledge based economies

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.266-275
• /
• 1993

We made $P_2O_5-SiO_2$ films on silicon for integrated optics application by low pressure chemical vapor deposition using TEOS (tetraethylorthosilicate) and TMPite (trimethylphosphite) and studied the deposition characteristics. The activation energy of the reaction was changed from 54.6 kcal/mole to 39.2 kcal/mole by incorporating the TMPite into the reaction of TEOS. The deposition rate and the P concentration of films increased in proportion to the flow of TMPite. As the deposition temperature increased, the deposition rate of the films increased but the P concentration decreased. The fabricated films showed the increase of refractive index of 0.0019 per 1 wt% of P concentration. The nonuniformity of films was ${\pm}$7% in thickness and ${\pm}$0.5wt% in P concentration and we showed this'nonuniformity is due to the nonuniform transport of TMPite. The films of more than 10wt% P concentration developed phosphoric acid on its surface when exposed to air for long time.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.506-510
• /
• 2007

Vacuum deposited 4,4',4''-tris(N-(1-naphthyl)-N-phenylamino)-triphenylamine (1-TNATA), a widely-used semiconductor material, is placed as a thin interlayer between indium tin oxide (ITO) electrode and a hole transporting layer (HTL) in OLEDs and a well-stacked 1-TNATA layer leads to stable and high efficiency devices by reducing the carrier injection barrier at the interface between the ITO anode and hole transport layers. According to Raman spectra, thermal annealing after deposition as well as electromagnetic field treatment during deposition lead to closer stacking of 1-TNATA molecules and resulted in molecular ordering. By thermal annealing at about $110^{\circ}C$, an increase in current flow through the film by over 25% was observed. Molecularly-ordered 1-TNATA films played an important role in achieving higher luminance efficiency as well as higher power efficiency of the multi-layered organic EL devices in the present work. Electromagnetic field treatment during deposition was less effective compared to thermal annealing

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.2
• /
• pp.111-116
• /
• 2010

In this study, the structural analysis was performed to optimize the membrane humidifier with hollow fiber membrane for polymer electrolyte membrane fuel cell system. The main design factors were considered by evaluating the humidifying performance according to various structural parameters such as packing density and length. The effects of operation conditions of membrane humidifier were also elucidated experimentally. Results imply that there are optimum points for the packing density and length of humidifier. It was also found that among operation conditions, relative humidity of wet exhaust gas and temperature of dry inlet gas have major effects on the humidifying performance.