• 제목/요약/키워드: 집광

검색결과 297건 처리시간 0.026초

LCD 백라이트용 렌티큘라 렌즈필름의 광구조 최적화에 관한 연구 (Study on the Optimization of the Optical Structure of Lenticular-Lens Films for LCD Backlight Applications)

  • 서재석;고재현
    • 한국광학회지
    • /
    • 제22권6호
    • /
    • pp.247-255
    • /
    • 2011
  • 최근 확산기능과 집광기능을 동시에 가지는 복합필름에 대한 관심이 커지고 있다. 본 시뮬레이션연구에서는 복합필름으로 주목 받고 있는 렌티큘라 렌즈필름의 광학구조를 최적화하고 이를 기존의 백라이트가 보이는 광학 성능과 비교하였다. 보다 정확한 시뮬레이션의 수행을 위해 시험적으로 제작된 렌티큘라 렌즈필름이 보이는 휘도의 시야각 분포를 측정하였고 이 실험 결과를 재현할 수 있는 시뮬레이션 조건, 특히 도광판의 산란 패턴이 가지는 쌍방향 산란분포함수의 수학적 모델을 확보하였다. 이에 근거해서 시뮬레이션을 수행한 결과 렌티큘라 렌즈의 종횡비가 1.25, 굴절률이 1.65인 조건에서 이 필름의 집광성능이 최대가 됨을 확인하였다. 최적화된 렌티큘라 렌즈필름이 1매 포함된 백라이트 모델은 프리즘필름이 1매 포함된 기존의 백라이트에 비해 집광성능이 현저히 떨어졌지만 렌티큘라 렌즈필름 2매를 직교해서 적용하게 되면 프리즘필름 1매가 가지는 집광 성능과 비슷한 성능을 달성함과 동시에 부드러운 시야각 특성의 구현에 기여할 수 있다는 점을 확인하였다.

집광 조건에서의 GaInP/AlGaInP 이종접합 구조 태양전지 특성 연구 (Study on the Characteristics of GaInP/AlGaInP Heterojunction Photovoltaic Cells under Concentrated Illumination)

  • 김정환
    • 공업화학
    • /
    • 제30권4호
    • /
    • pp.504-508
    • /
    • 2019
  • GaInP/AlGaInP 이종접합 구조를 제안하고 집광 조건에서 가장 높은 효율을 달성한 III-V 화합물 반도체 다중접합 태양전지의 맨 위 subcell에 주로 사용되는 GaInP 동종접합 구조를 대체해 이종접합 구조가 응용될 가능성에 대하여 조사하였다. $2^{\circ}$ off 된 웨이퍼와 $10^{\circ}$ off 된 서로 다른 off-cut 방향을 갖는 두 종류의 GaAs 기판 위에 성장된 태양전지의 특성을 집광 조건에서 측정하고 비교하였다. $10^{\circ}$ off 된 태양전지에서 더 높은 단락전류와 변환효율을 얻었다. 1 sun 조건에서 $10^{\circ}$ off 된 기판 위에 제작된 $2{\times}2mm^2$ 면적의 태양전지에서 $9.21mA/cm^2$의 단락전류밀도와 1.38 V의 개방 전압이 측정되었다. $10^{\circ}$ off 기판 위에 제작된 $5{\times}5mm^2$ 태양전지에서 집광도 증가에 따라 곡선인자(fiill factor)가 감소하여 변환효율은 6.03% (1 sun)에서 5.28% (20 sun)로 측정되었다.

fθ 공식을 활용한 텔레센트릭 렌즈 및 플라이아이 렌즈의 설계 (The Design of Telecentric Lenses and Fly-eye Lenses by Utilizing fθ Formula)

  • 임천석
    • 한국광학회지
    • /
    • 제24권1호
    • /
    • pp.9-16
    • /
    • 2013
  • 본 논문에서는 근축광학적인 대수식(algegraic equations)과 설계경험적인 근사조건을 통해 텔레센트릭 렌즈를 구조적으로 이해할 수 있는 일반화된 관계식을 찾는다. 이 관계식은 $f{\theta}$ 공식으로 명명되고, 단매렌즈, 이중가우스렌즈, 쿠크(Cooke)의 삼중렌즈, 쿠크의 삼중렌즈와 이중가우스렌즈가 결합된 복합렌즈의 순서로 단계적으로 적용된다. 그리고 이 공식은 조명광학용으로 사용되는 단매의 플라이아이 렌즈와 집광렌즈, 2매의 플라이아이 렌즈와 집광렌즈에 대해서도 순차적으로 적용된다. 여기서, 집광렌즈는 텔레센트릭 렌즈와 광학적으로 동일한 속성을 가진다. 결론적으로, 본 논문에서 찾은 $f{\theta}$ 공식은 텔레센트릭 렌즈에 대한 구조적인 이해를 이끌어냄과 동시에 직관적인 방식의 설계에도 활용될 수 있음을 보여 준다.

집광된 IR-LED를 이용한 가시광 통신 상향 전송 프로토타입 구현 (Prototype Implementation of VLC Upstream Transmission Using Focused IR-LED)

  • 장윤선;최경묵;주민철;박영일
    • 한국통신학회논문지
    • /
    • 제37C권9호
    • /
    • pp.784-790
    • /
    • 2012
  • 본 논문에서는 가시광 통신(visible light communication: VLC) 상향 전송에서 전송거리 확대를 위한 전송방식을 제안하였다. 이를 위해 집광된 infrared(IR)-light emitting diode(LED)의 출력을 이용하여 조명에 위치한 광수신부에 전송하였다. 이러한 집광을 하는 경우 지향성이 너무 커서 IR-LED를 조명부 수신모듈에 정확히 향하지 않는다면 전송이 어렵게 되는 문제점이 있는데, 이를 해결하기 위해 여러 개의 IR-LED를 조금씩 다른 방향을 향하도록 배치하고, 수신부와 통신을 통해 이 중 최고의 전송성능을 보이는 IR-LED를 선택하는 방법을 제안하였다. 통신 성능을 주기적으로 감시하고, 성능이 저하되면 LED 재검색 과정을 통해 새롭게 최상의 성능을 보이는 LED로 통신을 교체하도록 한다.

태양열 집광기의 플럭스 밀도 분포 특성에 관한 연구 (An Experimental Study on the Characteristics of Flux Density Distributions produced by Solar Concentrating System)

  • 강명철;강용혁;윤환기;유창균
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.422-426
    • /
    • 2005
  • This experimental study represents the results of an analysis on the characteristics of flux density distribution in the focal region of solar concentrator. The characteristics of flux density distributions are investigated to optimally design and position a cavity receiver. This was deemed very useful to find and correct various errors associated with a dish concentrator. We estimated the flux density distribution on the target placed along with focal lengths from the dish vertex to experimentally determine the focal length. It is observed that the actual focal point exists when the focal length is 2.17m. The total integrated power and percent power was 2467W and $85.8\%$, respectively, in the case of small dish, and also 2095W and $79\%$, respectively, in the case of KIERDISH II. As a result of the percent power within radius, approximately $90\%$ of the incident radiation is intercepted by about 0.06 m radius. The minimum radius of receiver in KIERDISH II is found to be 0.15m and approximately $90\%$ of the incident radiation is intercepted by receiver aperture.

  • PDF

다중 파라볼릭 반사경 방식을 이용한 추적식 집광시스템 개발 (Development of Tracking Daylighting System Using Multi-Parabolic Reflector)

  • 이충식;김종민;박연민;성태경;정채봉;강승훈;김병철
    • 한국태양에너지학회 논문집
    • /
    • 제33권2호
    • /
    • pp.56-63
    • /
    • 2013
  • Daylighting system is an alternative lighting system using daylight collecting device, light transformer and light diffuser. In this paper, we developed a daylighting system in which the collecting device composed by dual parabolic reflectors, the silica optical fiber adapted to the light transformer and light diffuser made of the polyglass square sheet. We have estimated the system efficiency and general color rendering index(Ra) of the developed system. The system efficiency measured to 23.8% and Ra was revealed as 95. Ra number of the developed system is bigger than the number(65) of the previous fresnel lens based sunlight collector.

배면개구형 집광시트의 자체 정렬 특성 (Self-aligning Characteristics of Optical Sheets with Apertures)

  • 박경주;김영규;최계훈;백상훈;황성기;곽진석;이종훈;권진혁;박이순
    • 한국광학회지
    • /
    • 제20권5호
    • /
    • pp.301-307
    • /
    • 2009
  • 액정표시장치의 고효율 백라이트 집광시트로 활용하기 위하여 배면 개구형 집광시트를 설계 및 분석하였다. Microlens array sheet, 피라미드 array sheet, 그리고 cone array sheet에 대해서 자체 정렬에 의한 배면 개구 형성 특성을 비교 분석한 결과, microlens array sheet가 가장 우수하였고, 다음으로 피라미드 array sheet였으며, cone array sheet가 가장 부적합하였다.

집광 열유속 측정과 모델링의 비교를 통한 집광 오차 평가 (Concentration Error Assessment by Comparison of Solar Flux Measurement and Modeling)

  • 채관교;윤환기;이현진;이성욱;김시석
    • 한국태양에너지학회 논문집
    • /
    • 제33권3호
    • /
    • pp.82-90
    • /
    • 2013
  • Concentration errors critically affect the performance of solar concentrator, so their evaluation is important to the concentrated solar power technology. However, the evaluation is very challenging because error sources are various and not easy to measure individually. Therefore, the integrated effect of concentration errors is often more interesting and useful for large-scale applications. In the present work, we analytically investigate and classify various concentration error sources and then explain that the effect of various concentration errors can be represented in terms of a root mean square value of reflector surface slope error. We present an indirect approach to assessing the reflector surface slope error by comparing solar flux measurement data with modeling calculations. We apply the approach for solar furnaces with different thermal capacity and investigate its advantages and disadvantages.