• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.605-606
• /
• 2012

The cost of a PV(Photovoltaic) installation are driving the market and the need for subsidized schemes, such as feed-in tariffs. Concentrated photovoltaic(CPV) is leading the development of future low cost renewable energy sources. CPV is offering high efficiency systems. This paper proposes technology and market for CPV.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.304-304
• /
• 2012

III-V 화합물 태양전지는 실리콘 등 다른 태양전지에 비해 1sun상 30% 이상의 고효율을 갖고 있고 direct bandgap과 높은 이동도 등의 물질특성과 3족과 5족의 비율 조절로 같은 결정구조에서 에너지 bandgap이 다른 물질들을 만들기에 용이하여 태양전지 스펙트럼의 넓은 영역을 흡수할 수 있는 장점이 있다. 그러나 셀 자체의 물질이 실리콘에 비하여 고가여서 고성능이 요구되는 우주 인공위성 등에 적용이 되었지만, 2000년대 이후로 집광에 적용 가능한 태양전지의 연구를 거듭하여 2005년부터는 값싼 프레넬 렌즈를 이용하여 1 sun에 비해 500배 해당하는 빛을 셀에 집광하여 보다 효율을 증가시킴으로써 지상발전용에도 적용 가능한 셀을 형성하게 되었다. 더불어 태양전지의 효율을 증가시키기 위한 다양한 구조적 변화의 시도도 많이 이루어지고 있다. 최근 실리콘 태양전지의 표면에 texture 구조를 주어 높은 흡수율과 낮은 반사율을 갖게 함으로써 효율을 증가시키는 사례가 많아지고, III-V 화합물 태양전지도 texturing에 의해 증가된 효율을 발표한바 있다. 본 연구에서는 III-V 화합물 InGaP 태양전지의 window층으로 사용되는 InAlP 층에 Metal-assisted chemical etching (mac etching) 방법으로 texture 구조를 형성하여 etching 시간에 따른 InAlP층의 표면 변화와 반사율의 변화를 분석하였다.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.1
• /
• pp.39-45
• /
• 2017

This paper presents the effect of solar collectors on the performance of solar tracking daylighting systems. A series of measurements were made for two different types of solar collectors mounted on double axis solar trackers: Parabolic dish concentrator and Fresnel Lens. Indoor light levels were measured at different locations of an office space (longitude: 126.33 E, latitude 33.45 N) as photo sensors were placed on a task plane 80 cm above the floor. To accurately monitor the applicability of the systems, measurements were performed under clear and overcast sky conditions with the roll-screen (on the south window) in the down position. Comparing the illuminance data, the system with Fresnel lens outperformed that of parabolic dish concentrator. On clear days, the former delivered the light levels of 400~600 lux on the task plane whereas the latter recorded 100~200 lux. Depending on the amount of cloud cover, on overcast days, illuminance readings fluctuated to some extent.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.32-38
• /
• 2009

An FMEA for the waterjet-lifter of a DSNM is performed to prevent the occurrence of device failure. A waterjet-lifter raises and transports manganese nodules from the deep-sea floor up to a somewhat elevated place, from which a pin-scraper transports the lifted nodules to the inner space of the DSNM. A concept design for a device using the axiomatic design methodology is shown as the mapping between the functional domain and physical domain. The FMEA for a DSNM is introduced briefly and the rating criteria of severity, occurrence, and detection for the DSNM are defined. The FMEA of the functional requirements of a DSNM device is accomplished. Three kinds of failure modes, as well as their effects and causes, are predicted. Current design control methods for detecting potential failures, such as physical or computational experiments, design confirmation, and mathematical calculation, are described and the recommended actions for several significant causes are suggested.

• The Optical Journal
• /
• s.154
• /
• pp.33-45
• /
• 2014

■ 광통신용 렌즈는 광통신 시스템에 있어서 송신단과 수신단에 사용되는 하나의 부품으로 집광/발산의 결상 기능을 지니며, 광회로 부품과 광섬유 또는 수발광소자인 LD/PD와 광섬유를 효율 좋게 저손실로 접속하는 기능을 수행함. ■ 마이크로 렌즈는 마이크로 광학의 분야에 있어 광의 집광 및 평행 광으로의 변환에 빠질 수 없는 가장 기본적인 소자로서, 마이크로 렌즈의 종류로는 마이크로 볼 렌즈, 비구면 렌즈와 GRIN 렌즈가 대표적으로 있음. ■ 렌즈에 적용되는 사양으로서 렌즈의 유효 구경, 초점(focal point), 주점(principle point), 주점에서 초점까지의 거리인 초점 거리(focal length), 가상의 법선을 기준으로 빛이 입사되는 각도인 입사각, 빛이 다른 매질을 만나 반사되는 각도인 반사각, 서로 다른 매질을 빛이 통과할 때 굴절하는 굴절각 등이 있음. ■ 렌즈 모듈의 구조는 렌즈, 스페이서(spacer), 아리리스(Iris), 백링(back-ring), 바렐(Barrel)로 구성함. ■ LD 모듈에서 광원에 패브리 페로(FP)로 사용하는 것에는 볼 렌즈가, DFB 광원으로 사용하는 것으로는 비구면 렌즈가 사용하고 있음. 이를 위해 PON용에서는 G-PON의 OLT, ONU 측, GE-PON의 OLT측에는 비구면 렌즈가 사용되나 GE-PON의 ONU측에는 볼 렌즈가 주로 사용되고 있음. ■ 2012년 볼 렌즈 시장은 수량 기반으로 2011년 대비 9.7% 증가한 7,350만 개, 금액기반으로는 17.0% 증가한 3,125만$를 기록하였음. ■ 2012년 비구면 렌즈 시장은 수량 기반으로 2011년 대비 22.0% 증가한 2,220만 개, 금액 기반으로는 32.0% 증가한 8,900만$를 기록하였음. ■ 2012년 광통신용 렌즈 시장(볼 + 비구면)은 수량 기반으로 2011년 대비 12.3% 증가한 9,570만 개, 금액 기반으로는 27.7% 증가한 1억 2,063만$이었음.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.11-18
• /
• 2004

A solar concentrator, named KIERDISH II, was built at KIER in order to investigate the feasibility of high temperature solar energy application system. The constructed concentrator is a dish type solar concentrator with a focal length of 4.68m and a diameter of 7.9m. To successfully operate KIERDISH II, optimal design of the absorber is very important and flux density distribution has to be known. The focal flux density distribution on the receiver was measured. We have observed the shape and size of flux images and evaluated percent power within radius. Flux density distribution is usually measured by a CCD(charge coupled device) camera and a radiometer. In this paper we present a flux mapping method to estimate the characteristic features of the flux density distribution in the focal region of solar concentrator. The minimum radius of receiver is found to be 0.15m and approximately 90% of the incident radiation is intercepted by receiver aperture.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.129-137
• /
• 2012

This thesis introduced an azimuth tracking prismatic daylighting system. The system improved several issues of the previous passive prismatic daylighting system: low efficiency at sunrise and sunset, glare effect and polarized. The system was developed to track the movement of sun with azimuth tracking device, and it has its own power from the attached solar cells. We compared the with previous passive one in terms with system efficiency and daylighting factors(DF).

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.113-119
• /
• 2012

The two-step water splitting thermochemical cycle is composed of the T-R (Thermal Reduction) and W-D (Water Decomposition) steps. The mechanism of this cycle is oxidation-reduction, which produces hydrogen. The reaction temperature necessary for this thermochemical cycle can be achieved by a dish-type solar thermal collector (Inha University, Korea). The purpose of this study is to validate a water splitting device in the field. The device is studied and fabricated by Kodama et al (2010, 2011). The validation results show that the foam device, when loaded with $CeO_2$ powder, was successfully achieved hydrogen production under field conditions. Through this experiment, we can analyze the characteristics of the catalyst and able to determine which is more advantageous thing to produce hydrogen compared with previous experiment that used ferrite-device.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.248-253
• /
• 2004

We propose a near- field scanning optical interferometer (NSOI) based on the facet reflection of a nano-sized moveable tapered optical fiber. The interferometer can measure the position and the wave-front of a focused spot simultaneously. The interfering fringes are generated by the reflected beams from the sample surface and from the fiber facet. The wave-front analysis at the focusing position is obtained by using a phase shifting technique with a four-step algorithm. It is found that the resolution for controlling the focal position of our proposed NSOI is less than λ/3 and the measured wave-front aberration at the focal position is in good agreement with the ones obtained by a Twyman-Green interferometer.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.319-322
• /
• 2006

The Deep-sea miner system is composed of body, actuators, sensors, and devices for control and monitoring. At present, we are manufacturing the miner's body included actuators and already consisted with off-the-shelf embedded controller. But sensors and those devices were just determined. To previously test performance of embedded controller which manages control and monitoring of miner system, its simulator must be developed for control and monitoring. Hardware-In-the-Loop(HIL) simulation is being increasingly used in industrial applications. This is an effective tool for the evaluation of electric system and drives. In the HIL simulator, we can test and design the control and monitoring system freely without the risk of hardware ruins and the load of expenses. Also the programming software for miner operating is verified on the HIL simulator. In this paper, we introduce the concept of HIL simulator for control and monitoring of deep-sea miner.