• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.69.1-69.1
• /
• 2012

원자 한층 또는 수층의 두께를 가진 그래핀과 2차원 나노물질들은 그들의 적층형태의 3차원 물질들과는 두드러지게 다른 전기적, 전자적, 광학적, 화학적, 기계적 성질을 지닌다. 그래핀은 탄소원자들간에 sp2공유결합을 형성하여 뛰어난 기계적, 윤활적 특성을 가지고 있으며, 이황화몰리브덴 또한 좋은 윤활적 특성을 가지고 있다. 본 발표에서는 원자현미경을 이용해서 그래핀, 이황화몰리브덴, 질화붕소, 니오븀 다이셀레나이드 등의 원자 두께 수준의 2차원 나노물질들에서 나타나는 특이한 마찰적 특성들을 보고한다. 특별히 원자수준으로 얇아짐으로 두께에 따른 마찰력의 변화와 2차원물질의 주름에 따른 방향성있는 마찰특성 그리고, 기판에 따른 마찰력의 특성변화를 보고하도록 한다.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.179-186
• /
• 1989

The preparation of the fine BN powders by ammonia-nitridation of ammonia-decaborane derivate was attempted at temperature between 300 to 150$0^{\circ}C$. The formation mechanism of BN was examined and the resulant BN powder was characterized by means of IR, XRD, SEM and PSA method. In the nitridation below 80$0^{\circ}C$ bonding materials were identified with mainly BH and NH but above 80$0^{\circ}C$ with BN by IR spectra and X-ray patterns. Crystalite size, lattice constant and particle size distribution of hexagonal BN prepared at 1, 50$0^{\circ}C$ were La=470$\AA$, Lc=180$\AA$, a=2.5062$\pm$1$\AA$, c=6.8285$\pm$2$\AA$ and 2.0-5.4${\mu}{\textrm}{m}$, respectively.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.29-34
• /
• 2008

Application of ceramic has increased due to excellent mechanical properties, and machining of ceramic has demanded gradually a precision surface machining. For decreasing the surface roughness, the control of IED lapping parameters is very important. This paper deal with the analysis of the process parameters such as applied forces, percentage of h-BN and IED lapping time, developed based on Taguchi method. Also, SEM was used for monitoring of a machinable ceramic surface.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1216-1224
• /
• 1996

In the use of glass fiber reinforced plastics it is often necessary to cutting the components, but the cutting GFRP is often made difficult by the delamination of composites and the short tool life. In this paper, the machinability of GFRP by mean of tool materials and type was experimentally investigated. By proper selection of cutting tool material and type excellent machining of this workpiece is achieved. The surface quality relate closely with the feed rate and cutting tools.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.216-217
• /
• 2012

QM/MM 혼성 이론 방법인 ONIOM 계산을 통해, $CO_2$가 $B_N$-BNNT 벽면에서의 흡착 반응과 $H_2CO_3$로의 전환 반응 메커니즘을 규명함으로써 $B_N$-BNNT가 효과적인 $CO_2$ 흡착제와 $H_2CO_3$ 생성 반응 촉매로 개발 가능함을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.925-929
• /
• 2001

Ultra-abrasives such as diamond and CBN have used to maintain accuracy and form deviation for superalloy etc. This study contains the dry cylindrical grinding of metals with Vitrified-bond CBN wheel and Resinoid-bond CBN wheel. For various conditions of grinding speed, workpiece speed, grinding depth and feed speed of table, the grinding resistance, the surface roughness, and the material removal are measured and discussed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.315-320
• /
• 2001

Ultra-abrasives such as diamond and CBN have used to maintain accuracy and form deviation for superalloy etc. This study contains the dry cylindrical grinding of metals with Vitrified-bond CBN wheel and Resinoid-bond CBN wheel. For various condition of grinding speed, workpiece speed, grinding depth and feed speed of table, the grinding resistance, the surface roughness, and material removal are measured and discussed.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.97-105
• /
• 1985

PECVD 방법으로 만들어진 도핑한 박막에서 실리콘으로의 인이나 붕소의 확산 특성이 연구되었다. CVD PSC 박막도 역시 만들어면 PECVD PSG에 있는 인의 확산특성과 나란히 비교되었다. 인의 부산은 N2와 O2 분위기 및 1000℃, 1,050℃, 1,100℃의 온도에서 수행되었다. 붕소의 확산 변수들은 B2H2유량 및 박막형성 온도를 달리하여 만들어진 박막에 관하여 고찰되었다. 실리콘으로의 주입물 확산 계수와 확산 Profile이 측정된 혹산 깊이 및 불순물 표면 농도를 써서 Barry의 모델을 적용하여 계산되었다.

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.15-21
• /
• 2004

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 5, 10, 15, 20, 25 and 30%. The objectives of this paper is to evaluate the fracture phenomenon of the tungsten carbide tool and the variation of surface integrity of the manufactured machinable ceramics under various cutting conditions during end mill machining With CNC machining center.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.47-54
• /
• 2008

Recently, application of ceramics has increased gradually due to excellent mechanical properties. Si3n4-BN ceramic which is one of ceramics is very hard and has superior resistance against volatile temperature and wear. However, extremely high hardness of the $Si_3N_4-BN$ ceramic makes conventional machining very difficult. Therefore, the use of machinable ceramic has been in a poor because of difficult industrial processes in spite of many advantages. And so new technology being called IED(In-process electrolytic dressing) was introduced to solve this problem. The aim of this study is to determine the machining characteristics in terms of pressurized weight to the workpiece and the influence with h-BN content using IED lapping system. Also, Acoustic Emission (AE) is used for the monitoring of surface characteristics.