• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.193-199
• /
• 2002

According to the NOx level requirement of annex Vl to IMO(International Maritime Organization) MARPOL 73/78, this regulation shall apply to each diesel engine with a power output of more than 130 ㎾ which is installed on a ship constructed and undergoes a major conversion on or after 1 January 2000. It is inevitable to adopt IMO standard for marine engines. Therefore, most of diesel engines which are being currently built should be tested and surveyed in accordance with the NOx technical code. In this study, various technics of NOx reduction methods were investigated for the diesel engines and the methods of NOx measuring were introduced by the new and simplified field detecting equipment. These results can be utilized for the basic design and developement of diesel engine for NOx reduction.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.3
• /
• pp.373-380
• /
• 2003

According to the NOx regulations of annex Vi to IMO MARPOL 73/78, all diesel engines with a power output of more than 130 kW should be delivered so as to comply with the IMO speed dependent NOx limit. It is inevitable to adopt this regulations for marine engines Therefore, most of diesel engines which are being currently built should be designed and tested in accordance with the NOx technical code In this study, NOx concentrations of 4 type engines were measured with portable NOx measuring system recommended by ISO-8178. As the results NOx concentrations of each engine by variation of engine speed and engine load were visualized Also these results can be utilized for the basic design and development of diesel engine for NOx reduction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.69-77
• /
• 2019

In this study, we evaluated the mechanical properties and nitrogen oxides removal characteristics according to the type and incorporation rate of the photocatalyst and investigated the method of separated placement for the production of economical and efficient photocatalyst concrete. As a result, when the photocatalyst incorporation rate was 5%, the highest compressive strength and elastic modulus were measured. As a result of evaluating the nitrogen oxides removal performance by the photocatalytic reaction, as the photocatalyst incorporation rate increased, the nitrogen oxide removal rate increased. At this time, the nitrogen oxides removal performance of photocatalyst P-25 was better than the NP-A. In consideration of economic efficiency, we have provided a method of separated placement for casting a constant thickness of concrete surface with photocatalyst concrete and evaluated the integrated performance at this time. As a result, it appears to be equal to or higher than mechanical performance and durability performance as compared with Plain, and it is judged that the integrated behavior is satisfied.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.7-11
• /
• 2001

Recently, increasing usage of diesel vehicle, many countries try to reduce the pollutant materials by emission regulation standard. Particularly in our country, the supplement ration of diesel vehicle is high, and air pollution by vehicle exhaust gas is very serious. So, in study, we tested exhaust gas by various mode in-light duty diesel engine. Therefore, we can know about NOx and smoke seriousness.

• Clean Technology
• /
• v.26 no.4
• /
• pp.304-310
• /
• 2020

In order to apply a photocatalyst (TiO2) to various building materials, TiO2-mayenite was prepared in this study. The TiO2 was synthesized using the sol-gel method by fixing titanium isopropoxide (TTIP) and urea at a ratio of 1 : 1. Later, they were calcined in a temperature range of 400-700 ℃ to analyze the properties according to temperature. BET, TGA, and XRD were used to analyze the physical and chemical properties of TiO2. The nitrogen oxide removal test was confirmed by measuring the change in the concentration of NO for 1 h according to KS L ISO 22197-1. The prepared TiO2 samples exhibited an anatase crystal structure below 600 ℃, and TiO2 (urea)-400 showed the highest nitrogen oxide removal rate at 2.35 µmol h-1. TiO2-mayenite was prepared using two methods: spraying TiO2 dispersion solution (s/s) and sol-gel solution (g/s). Through BET and XRD analysis, it was found that 5-TiO2 (g/s) prepared by spraying a sol-gel solution has maintained its crystallinity even after heat treatment. Also, 5-TiO2 (g/s)-500 showed the highest removal rate of 0.55 µmol h-1 in the nitrogen oxide removal test. To prepare TiO2-mayenite, it was confirmed that mayenite should be blended with TiO2 in a sol-gel state to maintain the crystal structure and exhibit a high nitrogen oxide removal rate.

• 기계와재료
• /
• v.24 no.2
• /
• pp.28-36
• /
• 2012

IMO의 해양오명 방지협약(MARPOL 73/78)에 의하면 선박 배기가스에 포함된 질소산화물(NOx)과 황산화물(SOx)의 배출 제한을 강화한 IMO Tier III 기준이 2010년에 발효되어 2016년부터 신조선에 적용되며, NOx는 85% 이상 저감할 것을 요구하고 있다. 국제적으로 적용되는 선박배출가스 기준을 국내에 적용하고, 검증하기 위해서는 이를 시험할 수 있는 시험/검증 절차와 방법을 개발하는 것 또한 시급한 문제이다. 선진국들은 이미 오염물질 배출 저감 장비를 채택하고 대기 중 오염물질 측정 장치 도입을 추구하는 추세이며, 친환경 선박 기자재 개발로 차세대 녹색선박기술 선점을 주력하고 있다. 대한전기협회에서는 독일 VGB사의 "VGB-R 302 He 1998 $2^{nd}$ Revised edition" 2010년 판을 참고하여 발전소에 대한 SCR 시스템의 성능시험 및 진단 권장지침을 만들어 이용하고 있지만, 선박 SCR 시스템에 대한 내용은 정해진 바 없으며, 이를 개발하는 것 또한 중요하다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.387-392
• /
• 2015

A method for measuring and analyzing the $NO_x$ in ships is described in $NO_x$ Technical Code 2008. The analysis device, as required by the Code, has been to use a Chemi-luminescence detection method or Heated Chemi-luminescence detection. on the other hand, selective catalytic reduction using $NH_3$ as a reducing agent has an interference effect on the analyzer, and causes measurement error. In this study, the Chemi-luminescence detection method was examined according to how it affects the concentration of $O_2$, CO, $SO_2$, $NH_3$. Fourier transform infrared spectrometry analysis equipment and measurement methods were compared. In order to confirm the effect of the physical interference of the measuring device, it was confirmed by decomposing a measuring device. Consequently, white precipitate and moisture were generated inside the chemiluminescence detection system and I found that affecting interference. The influence of interference highlights the need to consider the minimized $NO_x$ measurement method.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.55-64
• /
• 2013

Conventionally, greenhouse gas (GHG) emissions in the transport sector have been estimated using the fuel consumption (i.e. Tier 1 method). However, the GHG emissions on road networks may not be practically estimated using the Tier 1 method because it is not practical to monitor fuel consumption on a road segment. Further, air pollutant emissions on a road may not be estimated efficiently by the Tier 1 method either due to the diverse characteristics of vehicles, such as travel speed, vehicle type, model year, fuel type, etc. Given these conditions, the goal of this study is to propose a Tier 3 level methodology to calculate $CO_2$ and $NO_X$ emissions on inter-regional roads using the information from ITS infrastructure. The methodology may avoid the under-estimation issue caused by the concavity of emission factor curves because the ITS speed or volume information is aggregated by a short time interval. The proposed methodology was applied to 4 road segments as a case study. The results show that the management of heavy vehicles' speed is important to control the $CO_2$ and $NO_X$ emissions on road networks.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.24-35
• /
• 1986

현재 주요 가스상물질은 미국의 경우 규제전보다 일산화탄소가 96%, 탄화수소 96%, 질소산화물 76%가 개선되어 어느정도 안정단계에 들어 갔다고 볼 수 있다. 그러나, 입자상물질규제는 디이 젤자동차의 증가와 더불어 1986-1994기간동안 대폭적으로 강화되고 있다. 그러나 자동차 배출 가스중에는 수백가지의 화학물질이 존재하고 인체에 유독한 물질은 규제물질외에도 엄청나게 많다. 따라서 1977년 8월에 개정된 미국의 대기정정법(CAA, clean air act)에는 "신규 제작자동 차나 엔진에 사용되는 어떠한 방지장치, 시스템 또는 부품도 공중보건, 복지 및 안전에 부당한 위험을 일으키거나 일으키는 요인이 될 수 없다"(참조, CAA 202 (a) 및 CFR 86.084-5)고 규 정하고 있다. 이에 따라 미국환경청에서는 회람 등을 통하여 가능한 독성물질에 대하여 경우에 따라 측정할 것을 요구하고 있다. 국내 환경보전법에도 자동차연료첨가제 사용할 때 현저하게 유해한 물질이 배출된다고 인정하는 때에는 그 사용을 규제할 수 있게 되어있고 새로 제정될 자동차 배출가스 시험검사방법 및 절차에 관한 규정에 이에 관한 사항을 추가할 움직임이 있다. 물론 미규제물질의 규제하는 인체에 대한 피해정도나 측정방법 등의 여러 가지 문제가 수반되나 장기적인 국민보건과 환경보전 측면에서 신중하게 다루어져야 되리라 봐서 여러 가지 오염물질의 현황이나 분석방법 등에 대하여 기술코자 한다.여 기술코자 한다.

• Journal of ILASS-Korea
• /
• v.24 no.2
• /
• pp.73-81
• /
• 2019

It is expected that the introduction of real-driving emission will strengthen the exhaust emission. However, various researches have been reported that real-driving emission has been influenced by factors such as characteristics of the test routes and driving characteristics for drivers. In order to reflect this effect, European Commission applied the concept of driving dynamics to prevent deliberately driving of excessive and acceleration over RDE test. The purpose of this study is to analyze the characteristics of exhaust emissions according to real-driving test in three test routes and driving style. As a result of the test, it was confirmed that when the same driver tested real-driving test under three test routes, it depends on the driving characteristics of the route. Also, RDE-NOx for driving style was that severe driving has been about 16 times higher than normal driving in KNUT route.