• 제목/요약/키워드: 질량 추정

검색결과 220건 처리시간 0.029초

지구 평균 질량 변화를 포함한 GRACE 중력 모델 보정 (Refinement of GRACE Gravity Model Including Earth's Mean Mass Variations)

  • 서기원;엄주영;권병두
    • 한국지구과학회지
    • /
    • 제35권7호
    • /
    • pp.537-542
    • /
    • 2014
  • GRACE는 2002년 발사된 이래로 지하수, 빙하, 해수면의 변동에 의한 지구의 질량 재배치를 관측해오고 있다. GRACE 관측으로부터 추정된 지구 중력 모델은 기압보정을 거쳐 대기 질량이 제거된 지구 표면과 그 하부의 질량 변화를 나타낸다. 그러나 대기 총 질량은 지표면과 대기 사이의 물 교환에 의해 변한다. 그 결과 GRACE 중력 모델은 구면 조화 함수의 계수 degree 0, order 0 ($C_{00}$)에 해당하는 총 대기 질량 변화에 관련된 중력 스펙트럼을 가져야 한다. 주로 계절적인 시간 척도 안에서 변하는 수증기 때문에 $C_{00}$의 변화(${\delta}C_{00}$)는 특히 해수면의 계절적 변동과 북반구와 남반구 사이의 질량 균형에 매우 중요하다. 이 결과는 ${\delta}C_{00}$가 기후변동과 관련된 대륙 규모의 질량 변화 연구에 꼭 고려되어야 함을 뜻한다.

금속파편 충격신호에 대한 Benchmark Data 평가

  • 성게용;오규명;김봉현
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1996년도 추계학술발표회논문집(1)
    • /
    • pp.113-120
    • /
    • 1996
  • 원전 일차계통 내부구조물에 심각한 손상을 유발할 수 있는 금속파편의 탐지 및 진단기술을 비교하고 공유하기 위하여 LPM(loose part monitoring) Benchmark Exercise를 수행하였다. 금속파편 충격에 대한 Benchmark Data는 미국 Catawba Unit 2에서 취득하였으며 6가지 질량의 강구를 다른 높이에서 낙하시킨 36 종류의 data set으로 구성되어 있다. 출격위치 및 강구의 질량을 추정한 결과 실제값과 잘 일치하였고 국내 분석기술의 유용성을 보였으며 외국기술과 비교할 때 동등한 수준임을 확인하였다.

  • PDF

세종 산개성단 탐사관측 (SOS) II. 중년 산개성단 NGC 2353의 UBVI CCD 측광

  • 임범두;성환경
    • 천문학회보
    • /
    • 제35권2호
    • /
    • pp.79.1-79.1
    • /
    • 2010
  • 세종 산개성단 탐사관측 연구의 일환으로 중년 산개성단 NGC 2353에 대한 UBVI CCD 측광을 수행하였다. 측광학적인 방법으로 성단 내의 구성원을 선정하였으며, 이로부터 이 성단의 성간소광과 거리를 각각 E(B-V)=$0.10\pm0.02mag$$d=1.17\pm0.04\;kpc$으로 얻었다. 성단 구성원의 공간적인 분포를 통해서 성단의 형태가 북서 방향에서 남동 방향을 잇는 축을 중심으로 타원의 형태를 띠고 있는 것을 발견하였다. Padova 그룹이 제시한 이론적인 등연령 곡선을 관측한 색등급도에 맞춤으로써 이 성단의 나이를 1억 3천만년으로 추정하였으며, 이는 기존 연구보다 나이가 많은 것으로 나타났다. 구성원의 거리지수 분포에서 이 성단의 거리지수보다 밝은 곳에 나타나는 쌍성의 분포를 Gaussian 분포와 맞추어 $46\pm4%$ 정도의 최소 쌍성비율을 추정하였다. 마지막으로 광도함수와 질량함수를 유도하였고, 질량함수의 기울기는 $\Gamma=-1.4\pm0.2$를 얻었다.

  • PDF

시간-주파수 기법을 이용한 금속파편 질량 추정 (Mass estimation using time-frequency analysis)

  • 최영철;박진호;윤두병;박근배
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 춘계학술대회논문집
    • /
    • pp.1129-1134
    • /
    • 2006
  • Mass estimation was derived as functions of acceleration magnitude and primary frequency. The conventional method of mass estimation used frequency data directly in the frequency domain. The signals that can be obtained sensor contained noise as well as impact signal. Therefore, how well we can detect the frequency data in noise directly determines the quality of mass estimation. To find exact frequency data, we used time-frequency analysis. The time frequency method are expected to be more useful than the conventional frequency domain analyses for the mass estimation problem on a plate type structure. Also it has been concluded that the smoothed WVD can give more reliable means than the other methodologies for the mass estimation in a noisy environment.

  • PDF

동적 저울의 진동응답 측정에 의한 질량 추정 알고리즘 (Mass-estimation Algorithm by Vibration Response Measurement of Dynamic Balance)

  • 김병삼
    • 한국음향학회지
    • /
    • 제19권5호
    • /
    • pp.71-78
    • /
    • 2000
  • Quickness and precision are the two most important requirements for an industrial scale used in production lines. In this paper, a new approach, "Mass-estimation algorithm by vibration-response measurement of dynamic balance", is presented to improve some of drawbacks in conventional scales. The system, consisted of velocity and displacement sensors, spring scale, analog-digital converter and microcomputer, is based on full utilization of dynamic mass measurement of velocity and displacement via microcomputer-assisted real time monitoring. The resulting system, when combined with appropriate mass estimation algorithm software, has shown its effectiveness in terms of two desirable characteristics required.

  • PDF

시간-주파수 기법을 이용한 금속파편 질량 추정 (Loose-part Mass Estimation Using Time-frequency Analysis)

  • 박진호;윤두병;박근배;최영철
    • 한국소음진동공학회논문집
    • /
    • 제16권8호
    • /
    • pp.872-878
    • /
    • 2006
  • Mass estimation was derived as functions of acceleration magnitude and primary frequency. The conventional method of mass estimation used frequency data directly in the frequency domain. The signals that can be obtained sensor contained noise as well as impact signal. Therefore, how well we can detect the frequency data in noise directly determines the quality of mass estimation. To find exact frequency data, we used time-frequency analysis. The time-frequency methods are expected to be more useful than the conventional frequency domain analyses for the mass estimation problem on a plate type structure. Also it has been concluded that the smoothed WVD can give more reliable means than the other methodologies for the mass estimation in a noisy environment.

동적 상태의 선박 조향각 및 실시간 질량 추정 시스템 (Caculating Ship Rudder Angle and Real-Time Mass Estimator Under Dynamic State)

  • 명진혁
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2022년도 춘계학술대회
    • /
    • pp.31-32
    • /
    • 2022
  • 초기의 선박들은 선회시 킥현상 등을 설명하고 대응하는 선박의 전복예방을 위한 정확한 방정식이 제공되지 못했다. 육상에서는 차량의 정상상태 선회방정식을 이용한 전복예방 기술이 많이 개발되었고 이는 해상에서의 기존의 방법들 보다 더 좋은 성능을 보였다. 이 논문에서는 더 정확한 선박의 선회시 전복방지를 위해 애커만 기하학 모델 기반 선회방정식을 이용하여 선박선회시 복원을 하는 방법을 제안하여 선박안전관리 방안을 향상시킨다.

  • PDF

신뢰성 보정된 발사체 개발비용 추정방안 연구 (Studies for Reliability-corrected Cost Estimation Methodology of Launch Vehicle Development)

  • 김홍래;유동서;장영근
    • 한국항공우주학회지
    • /
    • 제40권4호
    • /
    • pp.364-374
    • /
    • 2012
  • 본 연구에서는 발사체의 개념설계 단계 동안 성능 변수뿐만 아니라 신뢰성에 따른 개발비용 추정방안을 분석하고자 하였다. 과거에는 발사체의 개발비용을 예측하기 위해서 주로 발사체의 성능과 건조 질량 등을 독립변수로 하는 추정 방법이 많이 이용되었다. 이러한 접근 방법은 비교적 근사하였지만 신뢰성 수준에 따른 비용 변화를 반영할 수 없기 때문에 원하는 신뢰성을 가진 발사체의 개발비용을 근접하게 예측하기는 쉽지 않았다. 본 논문에서는 이러한 비용추정 방법의 한계를 개선하기 위해 성능과 질량을 기반으로 한 비용 모델인 TRANSCOST에 신뢰성 개념을 도입하여 발사체 비용을 추정할 수 있는 방법론을 제시하였다. 이를 기반으로 신뢰성에 따른 한국형발사체(KSLV- II)의 개발비용을 추정했다.