• Title/Summary/Keyword: 진행방향

Search Result 4,577, Processing Time 0.03 seconds

SAW Sensors for Measurement of Surface Forces in Fluid Flows (유체흐름에 의한 표면력 측정을 위한 탄성 표면파 센서)

  • 노용래
    • The Journal of the Acoustical Society of Korea
    • /
    • v.9 no.6
    • /
    • pp.81-90
    • /
    • 1990
  • 유체 동역학에서, 난류에 의해 수중 구조물에 가해지는 압력과 전단력의 측정은 중요한 문제이 다. 이러한 유체의 흐름에 의한 압력과 전단력, 나아가 유체의 흐름방향까지 시간과 거리의 함수로 측정 할 수 있는 새로운 탄성표면파 센서가 개발되었다. 센서는 압축 인장형 전단력을 받는 두 개의 표면파 와 흐르는 유체 속의 표면파의 속도차는 또한 유체흐름에 의해 가해지는 압력에 비례한다. 정지류 속의 표면파와 흐르는 유체 속의 표면파의 속도차는 또한 유체흐름에 의해 가해지는 압력에 비례한다. 이 센 서를 응력 로젯과 같이 배열하면 유체의 진행방향도 함께 측정할 수 있다. 표면파 센서는 넓은 주파수 대역에 걸쳐 사용이 가능하므로, 적절히 설계하면 유체의 흐름에 의한 표면력과 유체의 진행방향을 동 시에 거리와 시간의 함수로서 국부적으로, 광역적으로 측정할 수 있다.

  • PDF

Non-Linear Fracture Analysis of Concrete Composite (콘크리트 복합체의비선형 파괴해석)

  • 김상철
    • Magazine of the Korea Concrete Institute
    • /
    • v.9 no.4
    • /
    • pp.187-196
    • /
    • 1997
  • 시멘트를 기초로하는 복합재료의 파괴거동은 주균열이 진행하기 이전에 파괴진행영역이라고 하는 미세균열대가 콘크리트 내부에 형성고기 때문에 선형파괴역하게 입각하여 해석하게 되면 실험치와 상당한 차이를 나타낸다. 이러한 문제점을 해결하기 위해 가상균열모델이나 균열띠 모델, 두 파라메터 파괴모델 등 비선형해석에 따른 여러 파괴역학모델들이 제안되었으나 이들 모델들은 2차원 해석에 근거를 두고 있기 때문에 구조체의 두께 방향으로 동일한 균열이 형성되며, 특히 콘크리트 실험에서 관찰되는 비연속적 균열발생에 대해서 설며이 어려웠다. 이에 본 연구는 콘크리트를하나의 다종복합체로 가정하고 연립변형모드 및 진행파괴모드 방향으로 구성재료를 배열한 상태에서 가상균열 이론에 근거한 비선형해석방법으로 모델링하였다. 진행파괴모드로 구성재료를 배열하면 강성이 높은 구성재료를 통과하여 균열이 진행될 때 균열선단으로부터 분포된 응력이 상층의 허용인장강도를 초과하게 되어 균열이 발생되며 이러한 균열은점진적인 균열진행과는 달리 비연속 동시 발생 균열ㄹ로 나타났다. 본 연구는 진행파괴모드에서의 파괴 해석 방법과연립변형모드에서의 해석 방법을 제시하였으며, 해석결과를 실험결과와 비교함으로써 검증하였다.

Aspect ratio에 따른 [100], [110]방향 Silicon nanowire GAA MOSFET의 특성 비교

  • Kim, Mun-Hoe;Heo, Seong-Hyeon
    • Proceeding of EDISON Challenge
    • /
    • 2017.03a
    • /
    • pp.412-416
    • /
    • 2017
  • CMOS device에서 off leakage current로 인한 power dissipation 문제는 미래 소자에 주어진 주요한 과제이다. Nanowire FET은 이러한 문제를 해결할 주요 미래소자로 각광받고있다. 하지만 nanowire FET을 공정할 때 채널 에칭을 완벽한 원형 구조로 가지는 것이 어렵기 때문에 타원형으로 시뮬레이션을 진행해 볼 필요성이 있다. 본 논문에서는 nanowire의 aspect ratio, crystal orientation의 변화에 따른 nanowire FET의 전압-전류 특성 및 transport 특성을 관찰하는 연구를 진행하였다. 시뮬레이션 결과, [100] 방향은 완벽한 원형구조에서 최적인 반면에 [110] 방향은 타원형으로 모델링함에 있어서 장점이 있는 것으로 나타났다.

  • PDF

Study on the Prediction of the Occurrence and Distribution of the Microcracks in Rock (암석의 미세균열의 발달과 분포의 예측방법에 관한 연구)

  • 백환조;김덕현;최성범
    • Tunnel and Underground Space
    • /
    • v.8 no.3
    • /
    • pp.226-233
    • /
    • 1998
  • Microcracks in rock materials, whether natural or induced, provide useful information on the engineering performance of in situ rockmasses. A population of preferentially oriented microcracks has observable effects on the physical properties of a rockmass, but their effects may not be evident if the rock material is highly anisotropic due to other causes. An experimental program was undertaken to investigate the effect of rock fabrics on the physical properties of rock materials. In this study, anisotropy in the circumferential wave velocity and the direction of induced fractures under axial point loading were measured. Rock specimens (NX-size) of the leucocractic Pocheon granite were cored from rock blocks, retaining the relative directions of each specimen. Another set of specimens was prepared from the rock cores of the same meterial, obtained in the field. The master orientation line (MOL) was set to be the representative direction of the microcracks in the specimen. Variation of the circumferential wave velocity of each specimen was then measured along the core, keeping the MOL as reference. The direction of the minimum wave velocity was nearly perpendicular to the direction of the MOL. Coring of smaller-sized (EX-size), concentric specimens from the NX specimens were then followed, and axial point loading was applied. The direction of induced fractures due to axial point loading was closely related to the MOL direction, confirming the prior test result.

  • PDF

Rerouting Technique with Walking Vector for Avatar Location Synchronization in CVE (아바타 위치 동기화를 위한 이동 벡터를 이용한 경로 재설정 방법)

  • 김종석;김학근;최윤철
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2002.05c
    • /
    • pp.479-484
    • /
    • 2002
  • 본 논문에서는 다중 사용자 간의 상호 작용과 공동 작업을 가능하게 하는 3차원 그래픽 기반의 가상 현실 시스템인 YVES(Yonsei Virtual Environment System) 의 성능향상을 위한 아바타 객체의 효과적인 동기화 방법에 대하여 제안하였다. YVES 는 연세대학교 컴퓨터과학과 멀티미디어 연구실에서 2001년도에 개발된 시스템이다. YVES의 사용자간 동기화 알고리즘은 기존의 방법에 비해 객체의 Poping현상을 없애고 동기화를 유지한 점에서 개선되었다고 할 수 있었다. 그러나 원래의 경로와는 변화된 다른 경로가 설정된다는 것과 이동이 완료되었을 때 수정된 경로로 향한 객체 진행 방향을 완료시점에서 원래의 진행방향으로 수정해야 항으로써 자연스럽지 못한 움직임을 보인다는 것이 문제점으로 지적되었다. 이를 보완하기 위해서 본 논문에서는 기존의 움직임 벡터를 새로 움직여야 할 움직임 벡터에 반영하여 새로운 경로가 원래의 경로와 보다 근접할 수 있도록 하고, 이동의 완료시점에서 객체가 향하는 방향이 원래 경로로 이동했을 경우와 동일하도록 하는 알고리즘을 제안하고, 각 알고리즘을 동일한 이동경로를 적용하여 비교하였다.

  • PDF

Low Bit-Rate Speech Coder (낮은 전송률 음성 부호화 방법)

  • 윤대희
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • 1994.06c
    • /
    • pp.267-270
    • /
    • 1994
  • 정보 및 통신의 필요성이 증대되면서 음성 부호화 방법에 관한 연구는 꾸준히 진행되어왔다. 특히, 이동통신에 대한 수요가 증가함에 따라 선진국에서는 기본 표준안을 완성하고, 채널 용량을 확대하기 위한 half-rate 표준화 작업이 한창 진행되고 있다. 본 논문에서는 표준화되거나 표준안으로의 가능성이 높은 음성 부호화 알고리즘들에 대해 서술한다. 또한 이로부터 향후 진행방향에 대해 언급하고자 한다.

  • PDF

Determination of Localized Defects in Wood by the Transfer Time of Ultrasonic Waves (초음파의 통과시간을 이용한 목재 결점부위의 평가)

  • Park, Jun-Chul;Hong, Soon-Il
    • Journal of the Korean Wood Science and Technology
    • /
    • v.36 no.1
    • /
    • pp.61-68
    • /
    • 2008
  • The effect of rupture on the speed of ultrasonic wave was investigated with the PUNDIT and the effective detecting method of defects, moving transmitter and receiver. The speed of ultrasonic wave according to the course of rupture was not affected by transmitter and receiver and in the course of parallel rupture, but only in the course of vertical rupture. When rupture was not located on the ultrasonic wave progressing course, rupture was not detected. However, if rupture was formed perpendicularly to the ultrasonic wave progressing course but located on the ultrasonic wave progressing direction, rupture can be detected. Also, the rupture can be detected, when one transmitter and receiver was placed at top and the other at bottom. After detecting rupture in a part, rupture was determined accurately, placing and moving two transmitters and receivers at width.