• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.440-447
• /
• 2009

This study was performed to compare the wear resistance of sealant and flowable resins for analyzing the effect of flowable resin as a sealant in preventive resin restorations. Specimens were made and Vicker's hardness number and surface roughness were measured. SEM observations of the polished and abraded surfaces were established. Kruskal-Wallis rank test and Mann-Whitney U test at the significant level of ${\alpha}$=0.05 were used. The following results were obtained: 1. The microhardness was decreased among groups in following order: Z350 (3M ESPE, U.S.A), Estelite (Tokuyama Dental, Japan) and Ultraseal (Ultradent, U.S.A). There were significant differences in all groups (p<0.0001). 2. The surface roughness was decreased among groups in following order: Ultraseal XT plus, Palfique Estelite LV and Filtek Z350 flowable. However, there is no statistically significant differences in roughness among Estellite, Z350 and Ultraseal at the significance level of ${\alpha}$=0.05, with p=0.116 3. SEM observation of the unworn and worn surfaces revealed the qualitative differences in the wear appearance among groups. The results in this study indicate that flowable resin is better than sealant in aspect of physical properties.

• Korean Journal of Poultry Science
• /
• v.33 no.2
• /
• pp.141-149
• /
• 2006

An experiment was conducted to investigate the effects of dietary acidifier($Lactacid^(R)$) and essential oil($Immunocin^(R)$) on the performance, nutrient metabolizability, small intestinal microflora, IgG level and leukocytes and erythrocytes in broiler chickens. Five hundred males and 500 females broiler chickens($Ross^(R)$) were divided into 20 pens of 50 chickens(25 birds in each sex). Five pens were assigned to each of four dietary treatments: control, diets containing antibiotics(Bacitracin methylene disalicilate), acidifier($Lactacid^(R)$) and essential oil($Immunocin^(R)$) dietary treatments. Birds were fed experimental diets ad libitum 5 wks. Weight gain, feed intake, and feed conversion rate were significantly affected by dietary treatment(P<0.05). Overall weight gain($0{\sim}5$ wks) of $Lactacid^(R)$ treatment was significantly lower than the others. Feed intake was highest(P<0.05) in the control followed by antibiotics, $Lactacid^(R)\;and\;Immunocin^(R)$ treatment. Feed conversion rate of $Immunocin^(R)$ treatment was lowest(P<0.05) followed by antibiotics, $Lactacid^(R)$ treatment and the control. Production indices of $Immunocin^(R)$ and antibiotics treatments were significantly higher than those of the control and $Lactacid^(R)$ treatment(P<0.05). $Immunocin^(R)$ treatment was the highest and antibiotics was lowest in serum IgG level. The number of leukocytes and stress index(neutrophil/lymphocytes) tended to be lower in $Immunocin^(R)$ treatment than others. There were no significant differences in erythrocytes among the treatments. The cfu of E. coli was significantly lower in $Immunocin^(R)$ and antibiotics treatments than $Lactacid^(R)$ treatment and the control. Metabolizability of crude protein was significantly lower in the control than $Lactacid^(R)\;and\;Immunocin^(R)$ treatment while that of NFE was significantly lower in $Immunocin^(R)\;than\;Lactacid^(R)$ and antibiotics treatments. It was concluded that essential oil product $Immunocin^(R)$ is as effective as antibiotics in improving feed conversion efficiency and production index while $Lactacid^(R)$ is not.

• Clinical and Experimental Pediatrics
• /
• v.50 no.7
• /
• pp.672-677
• /
• 2007

Purpose : To assess the prevalence and characteristics of headache comorbidity with epilepsy in children and adolescents in a specialty epilepsy clinic. Methods : Two hundred twenty nine consecutive patients attending the Chosun University Hospital Pediatric Epilepsy Clinic (mean age $10.0{\pm}4.1\;years$, range 4-17, M:F ratio 1.1:1.0) were interviewed with a standardized headache questionnaire. Headache was classified according to the International Classification of Headache Disorders, 2nd Edition and epilepsy was classified according to the International League Against Epilepsy. Disability was assessed using pediatric migraine disability assessment (PedMIDAS). Results : Of the 229 epilepsy patients, 86 (37.6%) had co-morbid headache. Of the headache patients, 64 (74.4%) had migraine (65.6%- migraine without aura, 20.3% - migraine with aura, 14.1% - probable migraine). The mean headache frequency was $7.2{\pm}8.4$ per month, mean duration was $2.2{\pm}4.0$ hours, mean severity was $5.2{\pm}2.2$ out of 10, and mean PedMIDAS score was $13.0{\pm}35.4$. The proportion of females was not higher in epilepsy with headache patients (48.8%) compared to epilepsy patients alone (48.0%). In the patients with migraine, 48.4% had complex partial seizures, 17.2% had simple partial seizures, and 34.4% had generalized seizures (P=0.368). A postictal association of migraine was reported in 18.8% with 17.2% reporting a preictal headache, and 7.8% reporting an ictal headache. Conclusion : The prevalence of headache in pediatric epilepsy is higher than that in general pediatric population, suggesting a co-morbidity of headache in epilepsy patients with migraine being the most frequent headache disorder. Altered cerebral excitability resulting in an increased occurrence of spreading depression may explain the headache comorbidity with epilepsy. Further studies are needed to assess the etiology of this co-morbidity as well as assess the frequency, duration, severity and disability response to antiepileptic drugs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.73-81
• /
• 2010

The objective of this study was to evaluate the color stability of new silorane-based composite resin compared with methacrylate-based composite resins after immersion in 3 staining solutions. One silorane-based composite(Filtek P90) and 3 methacrylate -based composites(Filtek Z250, Filtek Z350, Tetric Ceram) were evaluated. Twenty disk-shaped specimens($10{\times}2mm$) of each of 4 composite resins were prepared. The specimens were then divided into 4 groups of 5 specimens each and immersed in 3 staining solutions( coffee, red wine, curry solution) or distilled water(control) for 28-day test period. Color of the specimens was measured with a spectrophotometer(Color Eye 7000A) using CIE $L^*a^*b^*$ color space relative to CIE standard illuminant D65 at baseline, 1day, 3days, 7days, 14days, 21days and 28days after staining. The color differences( ${\Delta}{E^*}_{ab}$) were calculated. The results were obtained as follows ; 1. The mean color changes(${\Delta}{E^*}_{ab}$) of the composites were greatest in curry solution, then red wine, coffee and distilled water, in decreasing order. 2. The mean color changes(${\Delta}{E^*}_{ab}$) of the composites were greatest in Z350, Z250, Tetric Ceram and P90, in decreasing order.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.238-244
• /
• 2003

With the purpose of evaluating the effect of ailing amount of pit and assure sealants on the microleakage, 6 groups of specimens with different filling amount, filling materials and surface pretreatment were investigated. Sixty permanent third molars were divided into three groups. The occlusal surface of each tooth was divided into two parts; the filing width of one part was below 1mm (group1, 3, 5), and in the other part more than 2mm (group 2, 4, 6) Group 1 and 2: Helioseal F was applied directly to etched enamel; Group 3 and 4: Helioseal F was applied to etched and scotchbond Multi-purpose plus pre-treated enamel; Group 5 and 6: Tetric Flow was applied. After 500 times thermocycling and dye infiltration, we evaulated the microleakage. The results were as follows; 1. The mean microleakage score at each width were increased in the following order;group 5<3<1, and group 6<4<2. 2. In comparing the groups with same material and surface pretreatment but with different filling width (group 1 versus 2, 3 versus 4, 5 versus 6), the microleakage scores were significantly different. 3 The microleage was affected by filling amount of pit and assure sealants than Oiling materials and dentin bonding agent pretreatment.

• Journal of Adhesion and Interface
• /
• v.11 no.4
• /
• pp.155-161
• /
• 2010

A series of ethylene vinyl acetate (EVA) based hot melt adhesives containing different types and compositions of tackifier resins were prepared to investigate their rheological behavior and T-peel adhesion strength on polyurethane (PU) elastomeric sheets. C5 aliphatic hydrocarbon resin (C5 resin), C9 aromatic hydrocarbon resin (C9 resin), hydrogenated dicyclopentadiene resin ($H_2$-DCPD resin), and dicyclopentadiene and acrylic monomer copolymer resin (DCPD-acrylic resin) were used as the tackifiers for the hot melt adhesives. To determine the polarity of the tackifiers, their oxygen contents were analyzed, and the DCPDacrylic resin was found to contain an oxygen content higher than the other tackifiers. Only the DCPD-acrylic resin showed complete miscibility with EVA and the homogeneous phase of the hot melt adhesive blends at all compositions. The T-peel adhesion strength between the hot melt adhesives and polyurethane elastomeric sheets was mainly affected by the polarity of the tackifier resins in the hot melt adhesives, rather than by the storage moduli, G', of the hot melt adhesives themselves.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.554-563
• /
• 1999

For the purpose of elucidating the polymerization modes of dual-cure restorative materials and comparing them with single-cure restorative materials, a study was performed on the light-cured composite resin, dual-cure composite resin, dual-cure glass ionomer cement and chemical-cure glass ionomer cement. By measuring the microhardness of each material at 0mm, 1mm and 3mm depth during initial 24 hours with predetermined interval, the state of polymerization and degree of conversion was indirectly evaluated for each material, and obtained results are as follows : 1. All of four materials tested showed significant increase in microhardness after 24hrs compared with just after curing starts. 2. In all materials except Ketac-fil, there showed a significant difference in microhardness between each depth at each time interval. 3. In the test of lap time till final curing for each material, the polymerization process was revealed to last longer in the dual-cure type materials than in single-cure type materials at 3mm depth. Based on the results above, it was demonstrated with materials of dual-cure mode that the degree of conversion increases by successive curing reactions even in the deeper layers where sufficient curing light is impermeable.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.333-342
• /
• 2004

The purpose of this study was to evaluate the clinical effectiveness of a plasma arc light and light emitting diode (LED), compared with shear bond strength and the failure pattern of brackets bonded with visible light in direct bonding. Brackets were bonded with Transbond XT to 60 human premolars embedded in the resin blocks according to different light-curing methods. Then, the shear bond strength of each group was measured using a universal testing machine (Instron) and the adhesive failure pattern after debonding was visually examined by light microscope. The results were as follows: 1. The shear bond strength showed no significant difference between the visible light and light emitting diode, but the plasma arc light exhibited a significantly lower shear bond strength compared with the visible light and light emitting diode. 2. In the visible light and light emitting diode, adhesive failure patterns were similar. Bond failure occurred more frequently at the enamel-adhesive interface. 3. The bonding failure of brackets bonded with plasma arc light occurred more frequently at the bracket-adhesive interface. The results of this study suggest that plasma arc light, light emitting diode and visible light are all clinically useful in the direct bonding of orthodontic brackets.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.27-33
• /
• 2010

Objective: The need to bond orthodontic brackets onto various alloys has increased because of the increasing demand for adult orthodontic treatment. This study tried to evaluate the shear bond strength between gold alloy and metal bracket using light emitting diode (LED) light curing after metal primer and silicoating surface conditioning. Methods: Half of the type III gold alloy plates were treated with sandblasting with aluminum oxide and metal primer containing 4-META. the other half were treated with silica and silane. Metal brackets were bonded with Transbond XT light curing adhesive on these plates and shear bond strength were evaluated 1 hour, 6 hours, and 24 hours later. The differences of shear bond strength between groups were evaluated with two-way ANOVA. Results: The results showed higher bond strength in the silicoating group and a tendency of bond strength increase over time. Conclusions: When using LED curing lights for metal bracket bonding to alloy surfaces, long curing time and silicoating can produce a reliable bonding strength.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.255-263
• /
• 2007

Composite resin restorations are widely used to restore decayed teeth or preventive restoration in children. Children often receive topical fluoride treatments on a semiannual basis. However there is concern that topical acidulated phosphate fluorides (APF) may cause deterioration of composite resins. The aim of this study was to evaluate the surface changes in composite resins due to topical fluoride application. Composite resins(Solitaire $2^{(R)}$, Metafil $CX^{(R)}$, Composan $LCM^{(R)}$, $Charmseal^{(R)}$) in topical fluoride agents were immersed and their surface roughness, weight loss and SEM findings were evaluated. The results were as follows: 1. The 4 minutes-immersion group showed more roughened surface than 1 minute-immersion group and the control group showed the smoothest surface among all the materials, and there was statistically significant difference between the groups except the Composan $LCM^{(R)}$ (P<0.05). 2. There was no significant difference between the 1 minute-immersion group and 4 minutes-immersion group in weight loss (P>0.05) 3. The experimental group treated with topical fluoride gel showed generally more roughened surface than control group in the SEM findings.