• Korean Journal of Optics and Photonics
• /
• v.32 no.3
• /
• pp.108-113
• /
• 2021

We propose and experimentally demonstrate a method of remote sound extraction using laser Doppler interferometry. The output frequency of a laser Doppler interferometer changes to be the same as the frequency of the acoustic wave from than object vibrated by the sound due to the Doppler effect. Based on this phenomenon, we measure the vibrational frequency of a remote target affected by a sound wave in real time, via laser Doppler interferometry. We track the peak frequency of the interferometer's output via appropriate signal processing, which confirms that the characteristics of the so detected wave are the same as that of the original sound source. We also confirm that the same method can retrieve the sound waves not only from remote sources of single tones, but from those of any sound.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.28-33
• /
• 2023

In this research, the isolator and the inner gimbal inside of typical EO/IR equipment were replaced with a spring stabilizer. This Spring stabilizer system revealed an internal platform capable of external vibration damping and 6-DOF driving. This system was designed based on machined springs and spring modules of the spring stabilizer, structure, and other fixture. Through modal vibration analysis, suitable material for the spring was determined. Structural stability of the spring stabilization device was determined through random vibration analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.127-134
• /
• 2009

In this study, possibility of the laser eavesdropping is investigated on the window glasses with various thicknesses, Glass windows are excited by maximum length sequency (MLS) signal and the vibration sound is detected by a laser doppler vibrometer. From the detected sound, speech intelligibility is objectively estimated. Speech transmission index (STI), which is based on the modulation transfer function (MTF). is calculated for the estimation. Finally, disturbing wave effect on the speech intelligibility is analysed by using an outside speaker and a window shaker attached on the glass window. The purpose of the study is to estimate the possibility of remote eavesdropping by the laser sensor and to evaluate the performance of the homemade window shaker to protect from the remote eavesdropping.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.12-18
• /
• 2021

The purpose of this study is to effectively mitigate the bending displacement that occurs in the bridge due to forced vibration. We developed CTMD (Combine Tuned Mass Damper) that combines the relationship between spring and mass to control the bending behavior of simple beams. The experiment was conducted to confirm the control effect according to the change in the mass ratio of the developed CTMD. The developed CTMD is designed and manufactured so that the mass ratio can be adjusted according to the characteristics of the bridge. The maximum load of the spring applied to CTMD was fixed at 33.15 N. In order to evaluate the performance of the developed CTMD, a simple beam composed of hinges and rollers as boundary conditions was fabricated. In the experimental method, a CTMD was installed in the center of a simple beam and the deflection displacement according to the mass ratio was measured. The shaking condition was shaken at 3 Hz to induce the maximum bending behavior of the simple beam. As a result of the experiment, it was confirmed that when the optimal mass ratio was 2.1, the damping rate of the bending behavior displacement was about 71.2 %, indicating the best control effect.

• Korean Journal of Agricultural Science
• /
• v.20 no.1
• /
• pp.68-87
• /
• 1993

Data acquisition system and computer program developed in this study could be well used in engine vibration analysis. The system and program developed were also operated to be able to control measuring interval, number of channels, number of data. The flywheel was specially studied to provide the proper weight with rubber damper for the engine design at low level of vibration. This study was conducted to obtain basic data which affect the engine vibration. The experiment of this study was performed on original weight flywheel, weight-reduced flywheel, weight-reduced and rubber-coated flywheel, weight-reduced and damper-attached flywheel. Avarage of peak value, maximum vibration, power spectrum density based on FFT analysis are major factors of this experiment. Results were obtained as follows : 1. When rubber was inserted in the flywheel rim of which weight was reduced from 32.2kgf to 24.4kgf, maximum vibration of the engine was decreased 48.3% at X axis, 35.5% at Y axis and 34.6% at Z axis in comparison with the flywheel of original weight. 2. When the flywheel of rubber damper was compared with the original flywheel, the average of absolute vibration for rubber damped flywheel was decreased at X, Y, Z axis and especially its decreasing rate was so high at X-axis comparing with the other flywheel, which implied that rubber damper was very useful to reducing the vibration of the engine at X axis. 3. Hysteresis losses of X, Y, Z axis were greatly decreased in the flywheel with rubber damper on rim. 4. Damped oscillation effect on X and Y axis vibration above average peak vibration by the flywheel of rubber damper on rim was larger than those by the other flywheels. 5. Power spectrums of vibration at real and imaginery part were bi-mode type. The vibration frequency of rubber dampered flywheel which weight is decreased was slightly increased as compared with original flywheel.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.146-156
• /
• 1998

To mitigate excessive noise from highways, and high speed rail road, it is often necessary to construct a noise barrier. Absorptive barroer attenuation solution is obtained for the problem of diffration of a plane wave sound source by a semi-infinite plane. A finite region in the vicinity of the edge has an highly absorbing boundary condition ; the remaining portion of the half plane is rigid. The problem which is solved is a mathematical model for a hard barrier with an absorbing edge. If the wavelength of the sound is much smaller than the length scale associated with the barrier, the diffraction process is governed to all intents and purpose by the solution to a standard problem of diffraction by a semi-infinite hard plane with an absorbent edge. It is concluded that the absorbing material that comprises the edge need only be of the order of a wavelength long to have approximately the same effect, on the sound attenuation in the shadow side of the barrier. Traffic noise is composed of thousands of sources with varying frequency content. To simplify noise predictions when barriers are present, an effective frequency of 550Hz may be used to represent all vehicles. The wavelength of sound at f=550Hz for traffic noise is about 2 feet. According to the above conclusion, an absorptive highway noise barrier is only needed to cover to cover approximately a 2 foot length of absorbing material. It would be more economical to cover only the region in the immediate vicinity of the edge with highly sound obsorbent material.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.185-191
• /
• 2008

Today, Large and bigger underground construction are increased. In this study, Blating used electronic detonation (OBM Method) and non-electric detonation are carried out. Through comparison with two method, reduction of vibration and noise and efficiency of construction are investigated. As a result of this study, using electronic detonation is shown that it can control lower vibration and noise level, and better HCF, mucfile, advance rate and fragmentation.

• Computational Structural Engineering
• /
• v.5 no.4
• /
• pp.24-28
• /
• 1992

구조물의 지진응답해석에 사용하는 입력지진동 특성을 구성하는 요소로서, (a) 지진동의 최대 지반가속도치 (b) 지진동의 위상특성 (c) 지진동의 계속시간 (d) 지진동의 스펙트럼 특성 등을 들 수 있다. 그러나 이들 지진동을 구성하는 각 요소들이 구조물의 응답 및 손상에 직접 관련되어 지진동의 강도를 나타내는 척도로써 나타나는 것은 아니다. 그리고 이들 지진동 특성을 규정하는 각 인자와 구조물의 응답특성 및 구조물의 손상도와의 관계를 규명하는 것이 입력지진동의 설정에 있어서 매우 중요하다고 생각된다. 또한 탄성 응답특성과 탄소성 응답특성과의 관계를 규명하여, 탄성 응답스펙트럼이 구조물의 손상에 미치는 효과를 정량적으로 파악할 수 있다면 강지진에 대한 구조물의 내진설계는 보다 간편하게 할 수 있을 것으로 생각된다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.267-270
• /
• 2000

강제가진을 받는 진동장은 직접장과 반사장으로 이루어진다. 직접장은 무한구조요소가 점입력을 받을 때의 해와 같으며, 반사장은 직접장에 의해 발생되는 1차 반사파 및 추가로 발생하는 무수한 반사파들의 합으로 나타낼 수 있다. 본 논문에서는 점가진을 받는 유한한 평판의 단일 주파수 해석을 수행하기 위한 레이추적기법을 연구하였다. 이를 위해, 직접장은 고주파수 가정을 이용하여 원형전달파로 근사화하고. 이 원헝전달파를 다수의 파동관 (wave tube)으로 이산화하였다. 균일한 경계조건과 무시할 만큼의 미약한 굴절효과를 가정하고 경계에서의 정반사 (specular reflection)만을 고려하여, 경계에서의 입사파동관. 전달 및 반사파동관의 기하학적 관계를 제안하였다. 이들 파동관이 평판 내부를 진행하면서 관측점에 미치는 영향들을 합성하여 비교적 정확한 강제진동응답을 얻을 수 있음을 단일 평판의 예제를 통하여 확인할 수 있었다 그러나, 연성된 평판의 경우에는 다소 부정확한 결과를 얻었다.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.2
• /
• pp.36-40
• /
• 2012

Pitch control of wind turbine is activated above rated wind speed for the purpose of rated power regulation. When we design pitch controller, its gain-scheduling is essential due to nonlinear characteristics of aerodynamic torque. In this study, 2-mass model including a vibration mode of drive-train for a 2 MW wind turbine is considered and pitch control with gain-scheduling using a linearization analysis of the nonlinear aerodynamic torque is applied. Some simulation results for the pitch gain-scheduling under step wind speed are presented and investigated. It is shown that gain-scheduling in pitch control is important especially in the region of high wind speeds when there exists a vibration mode of drive-train.