• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.1
• /
• pp.92-97
• /
• 2010

In general, the softer the stiffness of a linear vibration isolator the better the performance of isolation can be achieved. However, the stiffness of the isolator cannot be made too soft because it needs a sufficient stiffness to hold the load. This is the most critical limitation of a linear vibration isolator. Recently, a HSLDS(high-static-low-dynamic-stiffness) magnetic vibration isolator was proposed to overcome this fundamental limitation. The suggested isolator utilizes two pairs of attracting magnets that introduces negative stiffness. Previously, this new type of vibration isolator was merely introduced and showed a possibility of practical use. In this paper, detailed dynamics of the HSLDS magnetic isolator are studied using computer simulations. Then, the isolation performance is examined for various design parameters to aid the practical use.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.309-312
• /
• 2004

본 연구에서는 매미가 소형이면서도 광대역의 소리를 낼 수 있는 원리가 무엇인지를 파악하고 이중 음향 발생 장치 제작에 적용할 수 있는 요소를 도출하였다. 매미의 발음기관에서 가장 중요한 부분은 복부 공명실과 진동판이다. 복부 공명실은 위상 반전형 인클로져 시스템으로 모델링 할 수 있으며, 진동판은 돔 형태의 박판으로 볼 수 있다. 근육에서 발생된 입력 신호는 진동판의 곡면에 의해 판에 좌굴을 일으켜 높은 음압의 소리를 발생시킨다. 발생된 소리는 복부를 통해 위상이 반전되어 특정 대역이 강조된다. 진동판의 가장 큰 특징은 곡면구조에 의한 비선형적인 출력이며 이를 통하여 가진 주파수와 상이한 주파수 성분들을 효과적으로 발생시키게 된다. 이러한 구조를 음향 발생장치로 활용하기 위하여 단순한 곡면판의 기하학적 파라미터 변화에 따른 출력 변화 경향을 관찰 하였으며, 이러한 원리를 활용한 음향 발생장치를 구성하였다.

• Journal of KSNVE
• /
• v.5 no.3
• /
• pp.385-394
• /
• 1995

Recently, since robot manipulator becomes faster and lighter, its link is no longer regarded as rigid body, and robot controller which only controls robot position cannot reduce vibration of the flexible link. Therefore vibration control is needed in robot manipulator control in addition to position control. In the case that tip mass changes when robot manipulator in working, it is clear that the efficiency of the vibration/position controller designed for the fixed system goes down. In this paper, the system with time varying parameters, adaptive control theory is adopted which estimates parameters changed by the variation of the tip mass and re-calculates the gain of the controller. Validify of the proposed adaptive controller and capability of the estimator are evaluated by computer simulations and experiments. Comparison results of the optimal controller for the fixed system and proposed adaptive controller and carried out.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.352-356
• /
• 2011

The isolation performance of a linear vibration isolator is limited to the ratio of stiffness to mass it supports. The stiffness of the isolator must be large enough to hold the weight. This results in the deterioration of the isolation performance. Recently, to overcome this fundamental limitation, the HSLDS(high-static-low-dynamic-stiffness) magnetic vibration isolator was introduced and its isolation characteristic was investigated theoretically. In this paper, the isolation performance of the HSLDS magnetic isolator is examined experimentally. Considerable amount of experiments are performed by carefully considering nonlinear characteristics. The experimental results verify the practical usability promisingly and agree with the theoretical studies, i.e. its performance is largely dependent on the key design parameter.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.298-302
• /
• 2002

Equivalent volume estimation of the coupler and two coupled microphones has a key role in standard microphone pressure calibration. The equivalent volume of the microphone is determined by the dynamic characteristics of the diaphragm system and front cavity. Therefore the modal parameters of diaphragm system - natural frequency and damping fatter - should be measured explicitly for the estimation of the equivalent volume. The diaphragm system is composed of the vibrating diaphragm, back slit behind diaphragm, pressure equalization vent, and front cavity which are acoustically coupled. In the measurement, the electrostatic actuator was used to excite the system with the swept sine, and the frequency response was obtained. The close actuator in front of the diaphragm must influence the radiation impedance of the system, and then the modal parameters. From the measured frequency response, the natural frequency and the damping factor could be estimated with the Complex exponential method based on the Prony model and the zero crossing real and imaginary plot.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.185-188
• /
• 2006

생체 신경세포를 모방하는 진동성 신경 셀을 아날로그 집적회로로 설계한다. 진동성 신경셀은 입력신호 취합을 위한 취합회로와 신경 펄스 발생회로, 신경펄스 발생을 위한 범프회로와 트랜스콘덕터로 이루어지는 부성저항 블록으로 구성된다. $0.35{\mu}m$ 2중 폴리 공정 파라미터를 이용하여 SPICE 모의실험을 실시하여 입력 신호 유무 및 크기변화에 따른 출력 펄스의 발생을 얻어 진동성 신경회로의 가능성을 확인한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.81-87
• /
• 2017

This paper describes the dynamic behavior and enhancement of Korean high-speed trains. The tail vibration reduction method of the yaw damper installation method change, which was derived from previous research, was applied to the running test of high-speed train. In addition, the vibration reduction method for the entire vehicle was derived by a numerical method and its effect was confirmed by a running test. The improved design was applied to the double-deck high-speed train coaches and the commissioning proceeded without problems in dynamic behavior. Sensitivity analysis of the suspension parameters affecting the critical speed of Korean next-generation high-speed trains was performed and four design variables that greatly affected the critical speed were derived. These were in the order of the primary elastic joint x-directional stiffness, the secondary yaw damper series stiffness, the secondary lateral damper damping coefficient, and the carbody damper damping coefficient. By optimizing the design variables, the suspension parameter that improves the critical speed by 23.3% can be used in the commercial designs of Korean next-generation high-speed trains.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.14-14
• /
• 2017

본 연구는 트랙터 주행노면의 토양 특성이 트랙터 승차진동에 미치는 영향을 분석하는 것을 목표로 하였다. 여러 토양조건에서 실제 트랙터 주행실험을 진행하는 것은 어렵기 때문에, 상용 CAE 프로그램을 이용하여 트랙터를 모델링하고 시뮬레이션을 진행하였다. 이를 통해 여러 토양조건에 따른 승차진동의 특성을 비교, 분석하였다. 모델의 유의성은 트랙터 아스팔트 주행실험을 통해 진동데이터를 획득하고 실측 진동 데이터와 시뮬레이션을 통해 얻어진 진동 데이터를 분석해 검토하였다. 이 때, 노면 토양의 특성에 따라서 트랙터가 장애물을 만났을 때 순간적인 진동 특성을 분석하기 위해서 트랙터 주행 노면을 사인범퍼(sine-bumper) 노면으로 설정하고 주행실험 및 시뮬레이션을 진행하였다. 본 연구에서는 강체 노면, Heavy clay, North Gower Clay Loam 토양, Grenvile Loam 토양의 네 가지 노면 조건을 분석하였다. 분석 결과 침하가 발생하지 않는 강체 노면보다 침하가 발생하는 세 가지 토양 조건에서 장애물에 따른 순간적인 진동이 더 크게 나타나는 것을 확인할 수 있었다. 다만 승차진동이 토양 파라미터와 단순히 선형적인 관계만을 보이는 것은 아니라는 것도 확인할 수 있었다. 이 후, North Gower Clay Loam 토양 조건에서 트랙터 속도에 따른 시뮬레이션 진행 결과를 분석하였을 때, 토양 침하가 발생하는 토양 조건에서도 속도가 증가함에 따라서 진동 크기가 증가하는 것을 확인할 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.364-370
• /
• 2019

In this paper, an individual blade control (IBC) methodology is applied to find the best input scenario for vibratory hub loads reduction of XH-59A co-axial rotorcraft in high speed flight. A comprehensive aeromechanics analysis code CAMRAD II is employed to analyze the aircraft. A parametric study is conducted for optimum IBC inputs leading to the maximum vibration reduction. Numerical results demonstrate that up to 50% reduction in the hub vibration index is obtained for an IBC input at 3/rev frequency with the amplitude and phase angle of 0.5 deg. and 300 deg., respectively. The upper rotor exhibits as much as 6% more vibration reduction as compared to that of the lower rotor due to a clean inflow characteristic of the rotor. It is found that further vibration reduction gain is reached for IBC inputs with advancing-side only control. The hub vibration becomes reduced by up to 17% in reference to that with full rotor disk control. It is noted that the additional gain is obtained with significantly less power input with the advancing-side only control.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.1031-1037
• /
• 1997

The main torsional vibration source of the driveline is the fluctuation of the engine torque. The gear rattle is generated by an impact in the backlash due to this torsional vibration. Optimization of the clutch torsional characteristic is one of the effective methods to reduce the idle gear rattle. Many researches have been reported on this problem but only few of them give sufficient consideration to the detail clutch modeling and clutch design parameters (stiffness, hysteresis torque, preload, first stage length). This paper pays attention to the gear impact mechanism and clutch design parameters to reduce the idle gear rattle with computer simulation.