• Journal of Korea Game Society
• /
• v.19 no.2
• /
• pp.23-32
• /
• 2019

The popularization of VR content is slow. It's because they have not created a new visual experience, that is, 'utility' beyond 'interest'. The utility of VR content starts from functional reality. And to enhanced it, realistic interaction is required. Specifically, this study presents three methods of network play, character artificial intelligence, and Haptic implementation. In order to confirm the hypothesis, we conducted all phases of VR content production from baseball to contents production, play test, and technical verification. Through the test of the user and the evaluation institution about the final product, it was evaluated that it contributed to the realization of the content realism through the realistic visual effect, the play presentation, and the impact evaluation by the vibration.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.5
• /
• pp.277-284
• /
• 2023

Hardness and damping characteristics of fine discontinuous precipitates (DPs) microstructure generated by low temperature long term isothermal aging were investigated in comparison with those of T6 heat-treated microstructure composed of DPs and continuous precipitates (CPs) in Mg-9%Al alloy. In this study, T6 and fine DPs microstructures were obtained by isothermal aging at 453 K for 24 h and at 413 K for 336 h, respectively, after solution treatment at 693 K for 24 h. The DPs microstructure exhibited higher hardness than the T6 microstructure, which is related to the lower (α + β) interlamellar spacing of the DPs. The DPs microstructure possessed better damping capacity than the T6 microstructure in the strain-amplitude independent region, whereas in the strain-amplitude dependent region, the reverse behavior was observed. The damping tendencies depending on strain-amplitude were discussed based on the microstructural features of the T6 and DPs microstructures.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1043-1046
• /
• 2011

건강에 대한 예방과 관리를 반영한 것이 대체의학이다. 대체의학 중에 이침(耳針)요법은 부작용이 적은 방법으로 널리 사용되고 있다. 이침요법은 간단한 교육과정을 거친 후 자가 진단을 통해 응급처치가 가능한 것으로 실생활에서 손쉽게 이용되고 있다. 따라서 본 논문에서는 심장에 해당하는 이(耳)혈 상응점을 자극하여 심장과 관련된 음성 요소의 변화를 측정하였다. 이를 위해 심장에 해당하는 이(耳)혈 상응점을 자극하기 전과 후의 음성을 수집하여 음성 분석 요소 중 Jitter와 2Formant Frequency Bandswidth을 적용하여 단위 시간안의 발음에서 성대 진동의 변화율과 공명강의 변화를 통해 심장과 음성의 상관성을 분석하는 연구를 수행하였다.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.6
• /
• pp.389-395
• /
• 2023

Damping capacities of Mg-2.5%Al and Mg-2.5%Zn (in atomic) solid solutions were comparatively investigated in order to clarify the influence of solutionized Al and Zn elements on the damping characteristics of Mg. In this study, solid solutions with similar grain size were obtained by solution treatment at 678 K for different times (24 h for Mg-2.5%Al and 36 h for Mg-2.5%Zn), followed by water quenching at RT. The Mg-2.5%Al and Mg-2.5%Zn solid solutions showed similar damping capacities in the strain-amplitude independent region of 1 × 10^-6 ~ 1 × 10^-5 and in the strain-amplitude dependent region below 6 × 10^-4, over which the Mg-2.5%Zn solid solution possessed better damping capacity than the Mg-2.5%Al solid solution. The damping tendencies depending on strain-amplitude for the two solid solutions were analyzed and discussed in terms of similar length between weak pinning points (solutes) and different solute/dislocation interaction forces in Granato-Lücke model.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.5
• /
• pp.221-227
• /
• 2024

The damping capacities in the strain-amplitude dependent and strain-amplitude independent regions were comparatively investigated for pure Mg and Mg-X%Al solid solutions (X : 1, 2 at%) to clarify the role of Al solute in the damping properties of Mg-Al binary solid solution. In order to rule out the effect of grain size on damping capacity, grain sizes of the samples were adjusted to an almost similar level by changing the heat-treatment or solution treatment times at 683 K (12 h, 24 h and 32 h for pure Mg, Mg-1%Al and Mg-2%Al alloys, respectively). The damping capacities of the heat-treated pure Mg and Mg-X%Al solid solutions exhibited a decreasing tendency with an increase in Al concentration both in the strain-amplitude dependent and strain-amplitude independent regions. The observed damping trends depending on strain-amplitude were analyzed and discussed in association with decreasing length between weak pinning points (Al solutes) in Granato-Lücke model.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.291-294
• /
• 2010

In this study, we demonstrated high-efficiency blue organic light-emitting diodes (OLEDs) employing BCzVBi as a blue fluorescent dye doped into blue host material, DPVBi with various concentration. The optimized blue OLED device having high-efficiency was constructed with structure of NPB (500 ${\AA}$) / DPVBi:BCzVBi-6% (150 ${\AA}$)/$Alq_3$(300 ${\AA}$) / Liq (20 ${\AA}$) / Al (1000 ${\AA}$). The maximum luminescence of blue OLED was 13200 cd/$m^2$ at 13.8 V and current density and maximum efficiency were 26.4 mA/$cm^2$ at 1000 cd/$m^2$ and 4.24 cd/A at 3.9 V, respectively. Luminous efficiency shows two times higher than comparing with non-doped BCzVBi blue OLED whereas $CIE_{x,y}$ coordinate was similar with bare DPVBi blue OLED such as (0.16, 0.19). Electroluminescence of BCzVBi-6% doped blue OLED has two major peaks at 445 nm and 470 nm whereas pure DPVBi's blue peak appears at 456 nm and it is happened through endothermic Forster energy transfer by molecule's vibration between LUMO of DPVBi as host material and LUMO of BCzVBi as dopant in device.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.1 s.4
• /
• pp.135-141
• /
• 2002

Both non-linear damping values of the deep and shallow crustal materials and seismic source parameters are found from the observed near-field seismic ground motions at the South-eastern Korean Peninsula. The non-linear numerical algorithm applied in this study is Levenberg-Marquadet method. All the 25 sets of horizontal ground motions (east-west and north-south components at each seismic station) from 3 events (micro to macro scale) were used for the analysis of damping values and source parameters. The non-linear damping values of the deep and shallow crustal materials were found to be more similar to those of the region of the Western United States. The seismic source parameters found from this study also showed that the resultant stress drop values are relatively low compared to those of the Western United Sates. Consequently, comparisons of the various seismic parameters from this study and those of the United States Seismo-tectonic data suggest that the seismo-tectonic characteristics of the South eastern Korean Peninsula is more similar to those of the Western U.S.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.13 no.2
• /
• pp.111-119
• /
• 2013

Purpose: Mucopolysaccharidosis type I (MPS I) is a lysosomal storage disorder caused by deficiency of the enzyme ${\alpha}$-L-iduronidase, which leads to a broad spectrum of multisystemic manifestations. Short stature and decreased growth velocity are prominent features of MPS I. The aim of the present study was to evaluate the effect of enzyme replacement therapy (ERT) on growth of Korean MPS I patients from a single center. Methods: Height data were obtained by retrospective chart review of 10 Korean patients with MPS I who had received ERT for a minimum of 3 years. Height was expressed as standard deviation scores (SDS) based on normative data. Annual growth rates were calculated before and during ERT. A piecewise regression model was used to analyze height z-scores before and after treatment. Individual analysis was performed for impact of phenotype [(severe (Hurler) versus attenuated (Hurler-Scheie, Scheie)] on growth. Results: Annual growth was 3.3 cm (z-score= -0.21) in the year before ERT and 6.2 cm (z-score= 0.17), 5.8 cm (z-score= 0.07), and 3.8 cm (z-score= -0.4) in the first, second, and third years of ERT, respectively. Regression analysis showed improvement in the slope after ERT (difference= 0.04; P=0.022). Estimated slope differences between severe and attenuated phenotypes were statistically significant before (P=0.001) and after treatment (P<0.0001), although no significant difference was noted when stratified by phenotype. Conclusion: ERT with aldurazyme appears to have a positive impact on linear growth in patients with MPS I.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.90-90
• /
• 2017

생력화를 위한 구기자의 수확 기계화는 열악한 수확작업환경을 쾌적한 작업환경으로 개선하고 노동력 감소, 생산비 절감을 할 수 있다. 관행 손 수확과 진동 고리형 수확기 방법보다 높은 작업 능률 향상으로 영농규모의 확대 촉진 및 안정적인 영농 구조를 구축하여 재배농가의 생산비를 절감하여 경쟁력을 높일 수 있으며, 기존 인력에 의존하였던 수확작업을 기계화함으로서 전업농 및 대단위 경작이 가능하게 함으로서 국내에서 생산한 양질의 구기자를 국민에게 안정적으로 제공할 수 있다. 따라서, 본 연구는 구기자 수확작업의 생력화를 위하여 개발 보급된 수목형의 재배법 특성을 분석하고 이를 토대로 타격장치를 적용한 보행형 구기자 수확기를 개발하는데 목적이 있다. 수목형 구기자나무의 분지에 착과되어 있는 숙과를 주행하면서 탈과 할 수 있는 탈과 장치를 제작하기 위하여 타격형 탈과 장치를 3D 모델링 작업(Inventor V.11, Autodesk, USA) 후 시작기를 제작, 구기자 수확 시작기는 주행부, 타격장치, 집과부, 분지유인부로 구성하였다. 구기자 수확 시작기의 최대 높이는 형태학적 특성을 토대로 타격봉의 높이를 900 mm 이하로 제한하였으며, 조향장치의 높이는 800 mm로 하였다. 주행부는 구기자 재식 조사결과를 이용하여 고랑 폭 1,500 mm 이하에서 자유롭게 전 후진 이동이 가능하고 경사로 등을 주행 시에도 안전성을 높이기 위해 자동브레이크 기능이 있으며 타격장치의 타격 봉은 알루미늄 재질로 지름 100 mm, 길이 400 mm로 설계 제작하였으며, 구기자 분지 타격 시 분지와 타격 봉이 수직 상태로 타격이 가능하도록 제작, 집과장치는 포장의 두둑, 고랑은 일괄 표준화가 되어 있지않아 청양구기자시험장에서 측정한 재배법을 바탕으로 설계된 수집부 프레임의 적용범위는 폭 450 mm, 길이 720 mm, 높이 1,500 mm를 집과 범위로 하여 설계 제작하였다. 타격 방식을 적용한 구기자 수확기 성능평가 결과 조숙기에 30초 이상의 탈과 시 87.5 % 이상 탈과는 어려울 것으로 판단되었으며, 성숙기에는 타격시간에 관계없이 92 %의 매우 우수한 탈과율이 나타났다. 성숙기의 주행속도 48 m/h 일 때 탈과율과 집과율은 89 %, 92 %로 나타났다.단위작업시간당 최대 수확 능력은 관행작업 2.9 kg/hr, 진동고리형 수확기 5.2 kg/hr, 타격방식을 적용한 구기자 수확기는 최소 7.6 kg/hr, 최대 24.1 kg/hr로 관행작업과 비교하여 주행속도와 시기별 최소 2.6배, 최대 8.3배의 작업 성능 차이가 나타났다. 재배양식에서는 기계화 수목형이 적합한 것으로 나타났고, 타격방식을 적용한 보행형 구기자 수확기를 이용하여 수형별 시간대별 수확성능을 시험한 결과 우수한 결과가 나타났다. 이에 따라 구기자 재배 농가에 기계화수목형 재배법을 보급하고 타격방식을 적용한 구기자 수확기를 이용하면 작업환경 개선과 노동력, 인건비 절감을 통한 영농규모의 확대 촉진 및 안정적인 영농 구조로 구기자 경쟁력 제고를 할 수 있을 것으로 판단되어진다.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.186-193
• /
• 2010

Track system and periodic live load are characteristics of railway bridges. In the design and construction of railway bridge, periodic live load increases the importance of dynamic behavior. And It is well known that behavior of railway bridge may be affected by track system in real bridge. Through experimental study, static and dynamic behaviors were investigated. Deflection and stress due to bending moment were measured, the location of neutral axis of each section, natural frequency, damping ratio were analyzed for each three track systems - girder only, installed ballast track system and installed concrete slab track system. According to measured values for the each type of track system, concrete track system increases the stiffness of bridge by 50%, and ballast system does by 7%, dynamic responses of structure change linearly with the magnitude of load and location of neutral axis of each sections varies with each track system. Damping ratio is almost equal without and with track. Therefore, the effects of track system on the integral behaviors of railway bridge can not be ignored in the design of bridge, especially in the case of concrete slab track system. So study of the quantitative analysis method for effects of track system must be performed.