• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.9
• /
• pp.817-824
• /
• 2012

Transmission of unwanted vibration to sensitive systems can cause various problems including performance degradation and system malfunction. The most common approach to limit the transmission of harmful vibration disturbances to the sensitive system is adapting passive vibration isolator. The classical passive vibration isolator comprising a viscous damper and spring element in parallel, however, exhibits conflicting performance characteristics in that low amplification at the resonance, which is desirable, can only be achieved at the sacrifice of vibration isolation performance in high frequency region, which is undesirable. In this paper, vibration isolation characteristics of various passive isolator schemes in literature to circumvent this conflict are introduced and compared.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.10
• /
• pp.902-908
• /
• 2013

The input torque ripple induced by combustion engines is a significant source of NVH(noise, vibration and harshness) problem in automotive transmissions. Because this torque fluctuation is primarily transmitted to the input shaft of automotive powertrains(e.g., automatic transmissions) when the lock-up clutches are closed, a torsional damper with helical springs is generally inserted between engine and transmissions to isolate the input vibratory energy, which is essential for the passenger comfort. The torsional vibration isolator exhibits frequency ranges in which there is low vibration transmissibility. However, the isolation performance is currently evaluated through the static torsional spring characteristics. In this study, the transmissibility of torsional spring dampers, essential dynamic performance index for vibration isolator, is first experimentally evaluated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.98.1-98.1
• /
• 2015

G-M극저온냉동기의 구동으로 인해 발생되는 크라이오 펌프의 진동 저감을 위해 각 요소에 해당하는 부품의 소재 및 모델 변경으로 설계에 반영하고자 한다. G-M극저온냉동기는 헬륨냉매를 사용하여 2개의 정압과정과 2개의 정적과정으로 구성되는 냉동사이클을 구성하는데, 구조적 특성상 내부 왕복기의 운동과 고저압변환에 따른 압력차이가 냉동기의 진동을 유발하므로 진공성능에 영향을 줄 수 있으므로, 이를 최소화하는 기술 개발이 필요하다. 헬륨냉매의 고압 유동에 따른 관로 압력증가로 인한 유동소음이 발생하는데, 이로 인한 소음을 줄이기 위해 관로의 최적화 설계/방진구조반영(DAMPER)으로 진동 안정화(Vibration Stabilization)설계를 수행 하고자 하며, 이에 따른 최적화 연구을 수행하고자 한다. 일차적으로, 기존 시스템의 진동측정을 통해 진동의 가진원을 밝히고 진동 전달경로를 파악하고자한다. 진동 가진원의 가진 최소화, 진동전달경로의 전달률 최소화, 고압유동에 따른 관로 설계 최적화를 진동해석, 탄성체 동역학해석, 그리고 유동해석을 통해 진동 및 소음의 최소화 방안을 도출하고자 한다. 해석결과를 토대로 진동가진원의 최소화를 위한 제품설계변경과 진동전달경로에 대한 방진을 위한 dmper 적용(전달률 최소화) 및 유동소음 최소화를 위한 damper나 관로 최적화 설계를 수행한다. 상기 기존시스템 측정/분석, CAE해석을 통한 진동/소음의 최적화방안도출 및 실제품 적용기술은 저진동 크라이오펌프 개발을 위한 기반 기술 확립에 크게 기여할것이며, 향후 크라이오펌프 고도화 및 최신 기술 제품 개발에 큰 기여가 기대된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.138-145
• /
• 2005

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.83-84
• /
• 2013

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1-6
• /
• 2006

촉감 제시 방법은 다른 사람에게 방해를 주지 않고 은밀하게 정보를 전달할 수 있는 장점이 있으며, 특히 시각 혹은 청각 장애인에게는 반드시 필요한 정보 전달의 수단이다. 또한 촉감을 이용한 정보의 전달은 시청각을 이용한 정보전달의 방법을 보완하거나 때로는 대체할 수도 있다. 본 논문에서는 웨어러블, 모바일, 또는 유비쿼터스 컴퓨팅 환경에서 사용할 수 있는 착용 가능한 진동촉감 제시 장치를 제안한다. 이 진동촉감 제시 장치는 25개의 진동모터를 $5{\times}5$의 형태로 배열하여 문자, 숫자뿐만 아니라 다양하고 복잡한 패턴을 표시할 수 있다. 코인형 진동모터 각각을 스펀지로 감싸고 푹신푹신한 재질의 패드에 세워서 배열하여 진동의 퍼짐을 최소화하고 사람의 글씨 쓰는 순서에 따라 진동모터를 순차적으로 구동시키는 새로운 추적모드를 제안하여 사용자의 문자 및 숫자 인식률을 크게 향상시켰다. 사용자 성능 평가에서는 사용자의 발등에 영문 알파벳을 표시하여 86.7%의 인식률을 얻었다. 또한 진동촉감 제시 장치를 이용하여 핸드폰에서의 발신자 정보표시를 한다거나 네비게이션 시스템에 적용할 수 있는 등의 유용한 응용분야를 제시하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.940-941
• /
• 2012

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.131-138
• /
• 2011

For train vibration influence assessment of newly constructed buildings in building design levels, 4 train measured vibration acceleration responses were used to compare with TR theory values and suitability of TR values was proposed. Through this TR method, construction planned grounds located near railroad areas were selected and ground vibration measurement was conducted. Through natural frequency by MIDAS, vertical acceleration response, and ground frequency from measured vibration response, TR was calculated and vibration prediction was conducted. As a result of comparing acceleration response estimate applying TR and measured value of train vibration acceleration response, it was found that it was in 3.61%~37.1% of margin of error. Clear peak of 7.19~10.61Hz in KTX, Gyungeuisun, and cement train were confirmed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.9
• /
• pp.967-972
• /
• 2009

To investigate the vibration characteristics of compact disc player(CDP) due to excited vibration and disturbances, it is necessary to consider the transmissibility of the CDP. The disturbances as well as the temperature in the vehicle are the one of the important factors when CDP is designed. In this study, the effect on the temperature of the oil damper, which is applied to anti-vibration system of the CDP, was investigated. When the temperature was changed from $-30^{\circ}C$ to $90^{\circ}C$ and the properties of the oil damper (hardness of rubber, viscosity of oil) were changed, the transmissibility was measured. When the damper rubber has the large hardness, the difference of the transmissibility and natural frequency due to temperature showed the remarkable change as compared with the those of damper viscosity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.6
• /
• pp.415-422
• /
• 2003

In an apartment buildings, the floor Impact sound from upstairs has been regarded as a main source of noise causing discontentment among occupants. To set the optimum design for sound insulation, it is necessary to suggest the useful tools or technique that predict the floor impact sound. The purpose of this study is to suggest the supplementary formula(equation) and constant k considering vibration transmissibility in order to predict more precisely heavy floor impact sound by Impedance Method that have been briskly studied in Japan from comparing the measured values with the predicted values. The analyzed results had showed that if the damping material was glass wool or rubber, k=5 was proper and if the damping material was polystyrene foam, k>5 was desirable.