• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.14-17
• /
• 2009

본 연구에서는 장대교량에서 케이블의 장력을 간편하게, 그리고 자동적으로 추정할 수 있는 저비용 무선장력계측시스템을 개발하였다. 개발된 시스템은 크게 비용이 저렴하고 설치 및 관리가 용이한 무선 기반 하드웨어와 케이블에서 계측된 가속도 데이터로부터 장력을 자동으로 추정하여 주는 내장 (Embedded) 자동화 소프트웨어로 구성된다. 저비용 무선 기반 하드웨어는 연산능력을 가진 무선계측유닛과, 계측 신호개선을 위한 신호처리보드, 그리고 상용 MEMS 가속도계로 구성되었으며, 내장 자동화 소프트웨어는 계측된 신호의 주파수 분석을 위한 FFT 모듈, 케이블의 푸리에 스펙트럼으로부터 고유진동수를 자동으로 추출하기 위한 자동 피크 추출(Peak-picking) 알고리즘 모듈, 그리고 추출된 고유진동수를 활용하여 케이블의 장력을 추정하는 진동법 모듈로 구성되었다. 개발된 시스템의 검증을 위하여, 사장교의 케이블 축소모델을 제작하고 케이블 모델에 다양한 장력과 새그를 주어 진동실험을 수행하였다. 실험 결과, 개발된 시스템은 케이블 모델의 주파수응답스펙트럼으로부터 고유진동수를 정확하게 추정하였으며, 장력과 새그의 크기에 상관없이 매우 정확한 장력을 추정하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.259-262
• /
• 2004

본 논문에서는 무선 랜과 시리얼 통신장치를 지원하는 센서들을 활용하여 무선 환경에서 원격으로 진동 및 소음을 계측할 수 있는 유비쿼터스 컴퓨팅 플랫폼을 개발하였다. COTS (Commercial Off The Shelf) 개념을 활용하기 위하여 무선 랜과 시리얼 통신을 지원하는 PDA를 메인보드로 사용하였다. 구현된 플랫폼은 건설용 중장비의 소음을 원격 환경에서 계측하는 응용에 활용하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.87-94
• /
• 1998

Increasing flexibility and lightness of recently built high-rise buildings make the structures susceptible to loads such as earthquakes and winds. Therefore, higher performance vibration control systems to reduce the vibration levels are demanded more than any time in the past. One of the typical active vibration control systems is the active mass driver (AMD). In this paper, an active vibration control system consisting of small shaking table, building model, sensors, signal processing board and AMD is constructed. The dynamic characteristics of these individual systems are investigated through the experimental study. The performance of the active vibration control system is verified through the El Centro earthquake(1940,NS) on the building model.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.538-547
• /
• 2011

In this study, eco-friendly hybrid composite boards were manufactured from green tea and wood fibers for application as interior materials with various functionalities of green tea and strong strength properties of wood fibers. In this relation, the effect of green tea content on dynamic MOEs (modulus of elasticity) of these green tea and wood fibers composite boards were investigated. The dynamic MOEs of hybrid composite boards were lower than those of control boards without green tea, and the values decreased with the increase of green tea content. Also, the dynamic MOEs appeared to be somewhat different by resin type used for board manufacture. The hybrid composite boards manufactured from $E_1$ grade urea resin, which has higher molar ratio of formaldehyde to urea than that of $E_0$ grade one, were 1.06~1.54 times higher than that manufactured from $E_0$ grade. And, the differences between hybrid composite boards manufactured from both adhesive increased with the increase of green tea content. On the other hand, high correlations were found between dynamic MOE and static bending strength performances, it was concluded that static bending strength performances could be estimated from the dynamic MOE, except for a few hybrid board types with large variations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1153-1158
• /
• 2010

In this paper, We make horizontal balancer (HB) and confirm a possibility of the technique that can be applied to ship through horizontal vibration reduction experiment. We use MATLAB as the simulator tool and experimental equipment consists of two induction motors shafts of which cam type unbalanced loads are fixed to, DSP and inverter circuit. Two induction motors perform roles as vibrator and balancer respectively, DSP control softwares such as speed, phase and vector control program. The simulation and experimental results show that the balancer characterizes good vibration reduction by phase control.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.9
• /
• pp.982-989
• /
• 2008

There is a noticeable hum from the inverter board of LCD TV when in operation. In this study, we investigate the source and the characteristics of this noise for the inverter board of LCD TV using measurement of vibration and noise. Modal analysis of vibration and noise is visualized for identification of noise sources and transmission vibration. The main source of noise was the transformer of the LCD TV inverter. A noise reduction was achieved by damping the structural elements.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.333-334
• /
• 2023

비행시뮬레이터는 ICT 및 SW 응용분야에 속하는 기술로 항공기의 환경을 재현하는 시뮬레이션 환경을 제공한다. 시뮬레이터의 조종 장치인 일반적인 조이스틱을 대체한 기존 VR장비의 컨트롤러는 허공에 들고 조종하므로 정확하고 정교한 실제 항공기 조종에 사용하기에는 많은 문제점이 있다. 본 연구에서는 비행시뮬레이터와 VR분야에서 사용될 수 있는 가속도 센서와 진동 센서를 적용한 3D 조이스틱을 제안한다. 이를 위하여 3축 센싱과 정보를 표시하는 디스플레이 및 와이파이 통신을 위한 보드를 설계하고 유니티 기반의 가상 환경을 구현하여 적용 가능성을 확인하였다. 정상적으로 통신 인터페이스를 통하여 조종 장치가 동작하였고 게임 및 구현된 보드에서 확인한 센싱값이 일치함을 확인하였다. 연구의 결과물은 비행시뮬레이터 외에도 VR 및 다양한 메타버스 관련 콘텐츠에 사용될 수 있을 것으로 판단한다.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.1-7
• /
• 2017

While a satellite is carried into orbit by a launch vehicle, it is exposed to the severe launch environment with random vibrations and shock. Accordingly, these vibration sources affect electronic equipment, particularly the printed circuit board (PCB) in the satellite. When the launch load impacts the PCB, it causes negative behavior. This causes perpendicular bending around the boundary of fixation points that finally leads to the failure of solder joints, lead wires, and PCB cracks. To overcome these issues, the electronic equipment design must meet reliability requirements. In this paper, Steinberg's method is used to derive allowable and maximum deflection to verify design from a life perspective concerning the control board of the Antenna Pointing Driver (APD) mounted on KOMPSAT-3.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.163-167
• /
• 2008

This paper presents the analysis of tactile effects on different body parts according to the various vibration patterns. The experiments use a vibration pad made of 16 vibration elements in the form of $4{\times}4$ array. The vibration elements are controlled by a 8-bit microprocessor. The sound of gunshot initiates a vibration pattern on different body parts and its sensitivity is measured. The analysis of the experiments lead us to conclude that the vibration pad is the most realistic interface for shooting games and the shoulder part is the most sensitive part in the body. In addition, the most effective vibration pattern is the for the pattern which gives the sensation of spreading out from the center to the outside. This study analyzes the relationship between the human body parts and the tactile sensations by the various vibration patterns. The result of this study will be a good reference for user studies in the field of haptics based on the vibration.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.8
• /
• pp.768-773
• /
• 2011

This work presents an experimental investigation on vibration control of the active hybrid mount system for naval ships. To reduce unwanted vibrations, this paper proposes an active mount which consists of rubber element, piezostack actuator and inertial mass. The rubber element supports a mass. The piezostack actuator generates a proper control force and supply it to the mount system. To avoid being broken piezostack actuator, an actuator of the proposed mount is devised as an inertial type, in which a piezostack actuator is positioned between inertial mass and rubber element. Vibration control performances of the active mount system are evaluated via experiment. To attenuate the unwanted vibrations transferred from upper mass, the feedforward control is designed. In order to implement a control experiment, the active mount system supported by four active mounts is constructed. For realization of the controller, one-chip board is manufactured and utilized. Subsequently, vibration control performances of the proposed active mount system are experimentally evaluated in frequency domains.