• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.120-128
• /
• 2011

This paper presents an efficient method to analyze noise and vibration of marine diesel engines mounted on flexible hull structure. The analysis model should in general include the hull structure, leading to lots of computational efforts. To minimize the computational efforts, in this paper, the transfer synthesis utilizing the receptance at the mounting points is proposed. The procedure is then verified by comparing the results with those from the full model calculation. The effects of flexible hull structure on the acoustic power from engine block are finally investigated. It is found that the effect of the hull is significant when the receptance of hull structure is similar to or greater than that of mount or engine block.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.335-338
• /
• 2002

본 논문은 부유식 석유 저장 하역 선박(FSO)의 소음 특성 및 해석 기법에 관한 것이다. FSO의 선실 소음 수준은 일반 상선과는 달리 선실 내부에 있는 소음원 이외에도 topside에 있는 각종 소음원들의 영향을 크게 받는다. 따라서, topside에 있는 각종 소음원들이 선실의 소음수준에 미치는 영향을 정확히 평가하는 것이 중요하다. 일반적으로 FSO의 소음해석은 옥외 및 선실 소음 해석으로 구분하여 수행한다. 본 논문에서는 topside에 있는 각종 소음원들의 공기음 전파 특성 해석은 ISO 9613에 근거한 프로그램을 이용하였고, 고체음 전파 특성은 파워 흐름 해석법을 이용하였다. 또한 선실 소음 해석은 통계적 에너지 해석법(SEA)을 이용하였으며, 해석 결과로부터 높은 소음 수준이 우려되는 구역에 대한 방음 대책을 제시하였다. 위의 선실 소음 해석 결과는 향후 FSO의 topside에 있는 각종 소음원들에 의한 선실의 소음 해석 기법 정립에 기여할 것으로 기대된다.

• 오토저널
• /
• 제16권5호
• /
• pp.1-9
• /
• 1994

여기에서는 승용차의 구성부품별 해석기술의 분야별로 기술동향을 찾아보고자 한다. 1. 엔진과 변속장치 분야. 1.1 파워 플랜트 강성. 1.2 음원대책. 1.3 미션분야. 2. 흡.배기계 분야. 2.1 흡.배기음. 2.2 실내소음. 3. 엔진 마운팅 분야. 3.1 마운팅 레이아웃. 3.2 마운팅 특성. 3.3 전자제어 마운팅. 4. 타이어.서스펜션 분야. 4.1 서스펜션. 4.2 타이어. 5. 보디,프레임 분야. 5.1 보디구조. 5.2 실내음. 5.3 풍절은과 그외의 음. 5.4 경량 고강성. 6. 진동.소음실험 기술분야. 6.1 계측기술. 6.2 센서. 6.3 실험 시뮬레이션. 6.4 감성의 정량화. 7. 시뮬레이션 해석 분야. 7.1 적용범위. 7.2 복합 시뮬레이션. 7.3 모델화. 7.4 감성 시뮬레이션.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.42-47
• /
• 2014

In this paper, fatigue life analysis of each structure was performed through theoretical analysis method at design stage in order to verify the success or failure of the store's acoustic noise durability according to the Method 515.5 standard of MIL-STD-810F. In addition, experimental analysis was carried out through the ground and flight test by manufacturing the measuring store, and verification of the sound durability was completed through the flight test after manufacture of the actual store. Furthermore, the commercial FEM code through the PSD calculation method applying measured SPL enables verify the durability of new store components development for the future.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.292-295
• /
• 2006

Dimension and capacity of the zero tail type mini excavator are small as compared with medium or large excavators. Therefore, problems of the noise and the heat are major issues in design due to layout of each component such as the engine and the hydraulic module. It is necessary to reduce the noise and the vibration of construction machine, due to be enforced regulation for high noise construction machinery in the world. The objective of this study is to provide basic data which is apply to predict noise effect in detail design stage by estimating noise of cabin for zero tail type mini excavator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.392-395
• /
• 2006

The configuration of coaxial co-rotating contained in shroud provides a useful model for investigating the characteristics of flow in the HDD. Reynolds number is defined as $Re_R={\Omega}{R_o}^2/{\upsilon},\;Re_H={\Omega}R_oH/{\upsilon}$ in present study. An experimental investigation was performed for turbulence profiles and PSD distribution and vortices frequency behavior for various range of $Re_R=2.43{\times}10^4{\sim}3.61{\times}10^5$. A laser Doppler anemometry (LDA) is used to obtain the velocity field of unobstructed co-rotating disks flow. Airflow pattern visualization between inner and outer region was compared with turbulence profiles measured from LDA. Outer detached shear layer and dead-zone without oscillating velocity fluctuation to circumferential mean were quantitively traced.

• 한국철도학회논문집
• /
• 제6권3호
• /
• pp.163-168
• /
• 2003

This paper considers the sound radiation characteristics of a cracked rectangular vibrating plate, varying the orientation angle of a line crack. The vibration response of the cracked vibrating plate is obtained by using ANSYS, the acoustic theory based on the lumped parameter model is used to calculate radiated sound power. The radiated sound powers are computed with varying the orientation angle of the crack: i.e, 0$^{\circ}$, 45$^{\circ}$, and 90$^{\circ}$. It is found that characteristics of the radiated sound power are very closely related to the crack orientation, vibration mode and crack location.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.605-610
• /
• 2013

This study proposes an analysis model to simulate a noise map and estimate noise distribution for a location and its surroundings of a power plant. The noise map analysis was executed by using ENPro that is a commercial program for environmental noise prediction. Experimental evaluation for the proposed analysis model was carried out by comparing the results from noise analysis and measurement at several major points of the power plant and residential areas.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.416-421
• /
• 2013

In this paper, the design concept of the transport of defense equipment and processes were established. And the transport of large radar equipment design were investigated. Detailed design of moving equipment with reference to the U.S. military standard was performed.Damping system of the moving equipment by using a simulation designed to predict In order to minimize shock and vibration in the vehicle due to the irregular road surface is transmitted through. Analysis of the damping system was verified using the driving test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.738-743
• /
• 2013

Underwater radiated noise is the key in acoustic stealth performance of modern naval ships. The underwater radiated noise predicted by the hull vibration with radiation efficiency cannot give the information of radiation pattern which is essential to the analysis of detection possibility by enemy and to improve the operational performance of the naval ship. The radiation pattern of underwater radiated noise is able to be obtained with radiation efficiency and radiation direction coefficient. In this paper, a new method to extraction the radiation efficiency and radiation direction coefficient is suggested and proved with the simulation and experiment by using cylindrical shell of 70cm diameter in air.