• Explosives and Blasting
• /
• v.34 no.1
• /
• pp.11-18
• /
• 2016

It is necessary to minimize ground vibration and noise due to blasting work in urban environment. The blast induced ground vibration and noise are generally generated by a portion of detonation energy, where most of the energy is utilized for rock breakage and movement of rock mass. Recently a blast method utilizing U-shaped steel charge holder was suggested to reduce the ground vibration without decreasing destructive power toward the free surface. In this study, single hole blasting utilizing U-shaped steel charge holder were simulated and the stress waves caused by the detonation of explosives were monitored using AUTODYN software. In order to examine the fragmentation efficiency of the U-shaped steel charge holder, one free face blasting models which adapt the blast induced stress waves were simulated by dynamic fracture process analysis (DFPA) code. In addition, the general blasting models were also simulated to investigate the fragmentation effectiveness of the U-shaped steel charge holder in rock blasting.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.97-109
• /
• 2014

In order to identify the characteristics of the propagation depending on delay time (20, 25 ms) and priming location (top priming, middle priming, bottom priming), test blasts were carried out a total of 4 times using different spacing, burden, drilling length, charge per delay and was derived the formula to predict blast vibration. This study investigated the characteristics of vibration by analysis of the nomogram and prediction of Peak Particle Velocity (PPV) from delay time and priming location by the formula to predict ground vibration. And it analyzed the trends of vibration increase by standards charge 0.5, 1.6, 5, 15 kg. Standards charge is "Blasting design and construction guidelines to road construction" by the Ministry of Land, Infrastructure and Transport. Depending on the charge in favor of vibration control method is proposed. Thus, when the design was to be used as a variable.

• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.235-243
• /
• 2011

In this study, a control blast method, which utilizes crack guide holes, is suggested to achieve smooth fracture plane and minimize blast damage zone (BDZ) in smooth blasting. In order to verify the effectiveness of crack guide holes on the fracture plane control in blasting, fracture process analyses which consider regular smooth blasting and guide hole smooth blasting had been conducted and the fracture planes resulting from the analyses had been compared. The analyses models considered the ignition of the blast holes using detonation cords and each guide hole placed between blast holes. From the results, the smooth blasting utilizing guide holes showed lower fracture plane roughness than regular smooth blasting method in the hole spacing range between 20 to 40cm.

• Explosives and Blasting
• /
• v.34 no.3
• /
• pp.21-26
• /
• 2016

In case of urban blasting works at near neighbors, the size of one blasting should be minimized to reduce the vibration and noise. However, the complaints is not decreased due to increased numbers of blasting per day so that the period of blasting works become long. This case study is related to urban apartment construction site. In order to overcome the weakness of general detonators which is required many blasting times to meet the day productivity, we have been applied deck-charge blasting method using electronic detonators and then we successfully increased the day productivity with much less blasting times. Hence, we had effectively achieved the declined neighbors'complaints and shortening construction period.

• Explosives and Blasting
• /
• v.28 no.1
• /
• pp.40-54
• /
• 2010

The messer shield method applys mainly to a tunnel with small cross-section of a weathered soil or weathered rock district and is fulfilled mostly by man-power excavation. but in case that hard rock exposes on tunnel face, incredible is an application of the rock-splitting method using a hydraulic power or a blasting method. This study represents the case of a blasting method which can control to be practiced by the minimum charges of 125 g an initial vibration occurring at the cut instead of the rock-splitting method, even though water pipe and gas pipe are closely adjacent.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.891-901
• /
• 2016

By comparing test blasting data experimented in three layered-structure polymorphic grounds to a geological profile, influence of blast vibration with respect to uncontrollable ground characteristics was analyzed. Inefficient blast have been performed without sufficient verifications or confirmations because insufficiencies with regard to experiments and data of blasting engineering on the layered structures to be irregularly repeated clinker layer consisted of volcanic clastic zones. It is difficult to quantify N values of clinkers within test blasting region because they have diverse ranges, or coverages. An absolute value of attenuation coefficient N in a field, estimated by blasting vibration predictive equation (SRSD), are lesser than criteria of a design instruction, meaning that vibrations caused by blast can spread far away, and the vibrational characteristics of blasting test No.1, indicating relatively small values, inferred by the geological profile, pressures of gas by the explosion may be lost into a widely distributed clinker layers by penetrating holes resulted from blast into vicinity of clinker layers located in bottom of soft rock layers at the moment of blast. As a result, amounts of spalling rocks are decreased by almost half. Also, ranges of primary frequencies in the fields are identified as similar to those of natural frequency of typical structures.

• Explosives and Blasting
• /
• v.31 no.2
• /
• pp.14-24
• /
• 2013

The most effective way of the rock removing works in the downtown area is to removing rocks by splitting the rock by blasting with small amount of explosives in the hole. However environmental factors not only limit the applications but also increase the forbidden area. As this is a distributed multi-stage blasting method and to reduce vibration by applying the optimized precisioncontrol-blasting method, it is applicable in all situations. The process is to fix the stemming-help plastic sheet to the hole entrance when stemming explosives and insert detonator and explosive primer with same delay time, two or three sets. This method is more efficient in the downtown area where claims and dispute from vibration are expected. This method is easily usable by designing blast pattern even in the area where delay time blasting is difficult after multi-stage explosive stemming due to short length of blast hole (1.2~3.0m) and there is no detonator wire shortage or dead-pressure.

• Explosives and Blasting
• /
• v.26 no.1
• /
• pp.39-48
• /
• 2008

Using Electronic Detonators which is well known for controlling vibration, we have been studying Orchestra Blasting Method, OBM, for many years to transform the unpleasant blasting sound to favorable sound in some job-sites such as tunneling and bench blasting which have to been taken place near some structures needed great care. In this study, we focus on rhythmical sense. First, we acquired individual wave from a shot. With the program named the Program Blasting Wave, PBW, it was analyzed and found that its best delay time was 34ms and 50ms was acceptable. Also, delay time was fitted into the music which was accepted after analyzing the rhythm. As a result, the blasting sound along with the music felt comfortable as if the music was played with base drum.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.153-173
• /
• 1993

폭약은 탄광에서 석탄이나 각종 광물을 캐거나, 건설토목현장에서 암반 제거를 위해서 주로 사용되었다. 전쟁에서 군사용으로 파괴를 위한 목적으로 사용되기도 하였으나, 최근의 동서화해 분위기와 남북통일이 무르익는 시대적 조류로 볼때 더이상 파괴용으로의 사용은 제어될 것이고 이제는 평화를 위하여, 건설을 위하여, 산업발전을 위하여 더 많이 사용되어지고 응용되어질 것이다. 작금의 첨단산업의 발달과 산업의 고도화로 우리 화약 업계에도 첨단발파기술의 개발에 많은 관심과 연구.개발을 진행중이다. 첨단발파기술의 응용사례를 소개하면, 건축토목 분야에서 노후 고층빌딩 및 굴뚝의 철거, 노후 교량 및 공장시설의 철거등에 활용되고 있으며, 위락서비스 분야에서 응용으로는 불꽃놀이를 들 수 있다. 최근에는 첨단 과학 장비를 이용하여 각종 꽃불의 모양이 음악과 미술등 예술적인 기능을 기억시킨 컴퓨터를 활용하여 보다 고차원의 공예술품(공학-예술)을 만들어낸다. 아울러 각종 기공식 발파시에도 예술적 기능과 웅장함을 가미하여 그 화려함을 극치에 다다르게 한다. 그외에도 로켓트 발사추진제등의 우주 개발에의 응용, 석유시추등 해양개발에의 응용, 각종 공학 실험연구에의 응용, 폭발 가공에의 응용, 의학에의 응용, 철강산업에의 응용 등으로 그 숫자를 이제는 일일이 나열하기 힘들 정도로 광범위해졌다.

• Explosives and Blasting
• /
• v.28 no.2
• /
• pp.50-58
• /
• 2010

This study explores the slot-drilling method that has not yet enough been studied in Korea and intends to provide a theoretical framework for putting the method into practice in a construction site. The possible reduction of ground vibration by implementing slot-drilling methods is addressed. Two main subjects dealt with include the variation of vibration velocity that is based on the distance between the slot-drilling and the epicenter of blasting and the analysis of appropriate effective dimension of slot-drilling width and height to control blasting vibration. This study shows that effect of vibration reduction decreases when distance of the slot-drilling and the epicenter of blasting is getting larger and also reveals that there is a correlation between the slot size and the vibration velocity at any point.