• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.802-808
• /
• 2014

The purpose of this study is to suggest efficient methods for estimating population exposed to noises by analyzing differences of population exposed to noises estimated by each method through comparing exposed population estimated by utilizing existing methods and those estimated by using census output areas reflecting the actual population information of each address. For population exposed to noises, the error of exposed population estimated by using the per capita living space turned out to be the biggest, and other estimation methods had no significant difference. For population exposed to excess noises, as a result of analyzing population estimated by each method based on census output areas, the error of the method using a grid noise map turned out to be the biggest. For the method to estimate population exposed to noises by using a noise map, the estimation methods using census output areas and total ground area are considered to be more rational than the grid noise map estimation method or the method to estimate the living space per capita.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.491-497
• /
• 2007

Reasonably accurate estimation of the exposed population to the distinct levels of noise is essential to the efficient management of urban environmental noise. This study proposes a method of calculating the number of exposed people to industrial noise by using GIS tool and noise mapping. The exposed population of noise based on estimation of the number of people that lived in each building in urban area is compared with the one based on density of population. This study suggests the five step method that consists of gathering the fundamental data, extracting the property from the digital map, noise mapping based on the three dimensional topography, estimating population that lives in each building, merging the various results with GIS tool, and estimating exposed population to industrial noise through analyzing the noise map with GIS tools.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.310-318
• /
• 2011

Due to the lack of a noise and vibration survey for military air bases, noise and vibration are not taken into consideration for new installations, which has resulted in a number of problems, including the separation of tiles. Furthermore, it is not possible to establish appropriate counter-vibration plans to minimize damage resulting from vibration on structures, since no standard is in place when location for residence areas, including military quarters, is determined. In this context, this research includes a noise and vibration survey, on which basis a quantitative evaluation model for vibration of structure by aircraft noise is generated, as well as through linear regression analysis, and suggests installation standards by purpose of structure, minimizing the damage due to noise and vibration, and establishing appropriate counter-vibration plans for future installation and repairs of on-base structures in the military bases.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.107-112
• /
• 2007

The vibration generated on shipboard is very important because it greatly affects on the comfortable mind of passenger and working conditions of crews. Shipboard vibration is closely concerned with the development of propulsion method and the type of main engine to decide speed of ship. To make the propulsion power, the main engine of ship have continuous explosion process in engine room, so the shipboard vibration is generated. The shipboard vibration causes the physiological and psychological damages to human body. In the case of the human body exposed to the shipboard vibration, the evaluation of human exposure to whole-body vibration is prescribed in ISO 6954 : 2000(E). In this paper, to evaluate the shipboard working environment, two kinds of vibration levels onboard ship were measured and compared with one another between engine rooms, engine control rooms and wheel house by the regulation of ISO 6954 : 2000(E).

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.139-144
• /
• 2007

The vibration generated on shipboard is very important because it is greatly affect on the comfortable mind of passenger and working conditions et crews. Shipboard vibration is closely concerned with the development of propulsion method tint is main engine to decide speed of ship. To make the propulsion power, the main engine of ship engine room have continuous explosion process, so the shipboard vibration is generated The physiological damage and psychological damage of human body have caused by the vibration et shipboard In the case of the human body is exposed to the shipboard vibration, the evaluation of human exposure to whole-body vibration is prescribed in ISO 6954: 2000(E). In this paper, to evaluate the shipboard working environment, the vibration levels of two kinds of ship onboard were measured and compared with engine rooms, engine control rooms and bridges by the regulation of ISO 6954: 2000(E)

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.211-214
• /
• 2004

이륙과 음속 통과시 랜덤진동형태의 음향/진동환경에 노출되는 위성체의 음향/진동시험은 시제품을 완성한 후에 슨1행되므로 않은 시행착오를 겪거나, 과다한 안전계수를 사용하여 불필요한 무게증가 등의 문제점을 가지고 있다. 이러한 문제점을 극복하기 위하여 통계적 에너지 해석법 (Statistical Energy Analysis)을 이용한 선행 해석이 필요하다. 본 연구에서는 KOMPSAT-1 (Korea Multi-Purpose Satellite-1) 위성체의 SDM (Structural Dynamic Model)에 대하여 SEA 해석을 수행하였다. 감쇠 손실 인자 (Damping Loss Ffactor)는 단판을 분리하여, 연성 손실 인자(Coupling Loss Factor)는 SDM모델 하부의 두 샌드위치 패널을 분리하여 실험적으로 산정하였다.

• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.247-256
• /
• 1995

In this paper, double exposure holographic interferometry using ruby pulse laser is formed in order to investigate the propagation of transient waves. The vibration characteristics according to the change of impact load direction, i.e., impacted in the shear direction and in the normal direction are analyzed. It was observed that the macroscopic trends of transient wave generation and propagation in the assembly of precipitator plates were almost similar regardless of the change of impact load direction. But the propagation and mixing of transient wave was advanced relatively slowly when impacted in the normal direction.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.687-690
• /
• 2001

환경문제로써 소음에 대한 민원이 증가하고 관심이 커지면서 소음에 의한 인체의 영향 연구의 필요성이 제기되고 있다. 이에 대한 국내의 연구가 미미하고 산업보건의 관점에서 다루어져 왔기 때문에 먼저 국외 기술조사를 바탕으로 연구의 동향을 파악한다. 환경요인으로써 인체 영향 소음을 정의하는 인자로 어노이언스(annoyance)가 많이 사용되고 있으며 소음레벨과 관련하여 다양한 정량화 모델이 제시되고 있다. 소음이 의한 인체의 손상에 대해서는 많은 가능성과 연관성이 제시되고 있지만 그 발생 메커니즘은 아직 구체적으로 밝혀지지는 않았다. 보고서들01 의하면 장기간의 소음 노출에 의해서 다양한 건강 손꼴이 나타나며 안락감의 파괴로부터 시작하여 만성적인 질환으로 발전한다고 추정한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.4
• /
• pp.266-274
• /
• 2015

Vibration exposure of domestic high speed trains(KTX and ITX-saemaeulho) to passenger traveling on the Gyung-Bu line was measured to evaluate health effect which is based on ISO 2631-1. The vibration exposure was compared with the frequency weighted root mean square(r.m.s.) and vibration dose value(VDV) of the two trains’ vibration. It is concluded that vibration exposure of the two train during round trip of Busan-Seoul in single day is evaluated to be safe for the passenger’s health according to the health guidance caution defined on ISO 2631-1. Futhermore KTX’s vibration exposure is found to be significantly lower than ITX-saemaeulho thanks to lower vibration magnitude as well as shorter trip time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1257-1263
• /
• 2010

The naval structure exposes to environmental vibration of shafted propeller propulsion and engine vibration. The shipboard equipments are developed compliance to MIL-STD-167-1A. For this purpose, vibration fatigue life of shipboard equipment for long lives should be estimate via an analytical approach and vibration test. In this paper, High cycle fatigue strength of cast aluminum alloy A356 using shipboard equipment was evaluated by 14 S-N method. The stress applied on the structure is evaluated by an analytical method(frequency response analysis with sinusoidal input and a fatigue evaluation) to simulate a MIL-STD-167-1A test. The frequency with the maximum equivalent stress is shown by Max. test frequency and the vibration fatigue life of shipboard equipment was estimated by Miner's rule.