• Journal of Power System Engineering
• /
• v.15 no.4
• /
• pp.5-10
• /
• 2011

In case of using rapid vacuum-freeze drying for high quality dry flower of flowering plant, the morphological and physiological characteristics of dry rose showed as the following. The dry ratio of about 82% presented after 1 day in case of using rapid vacuum-freeze drying and it was reached that the optimum storage water content of general dry products was 18%. The dry ratio of about 89% presented after 4 days. This result indicates very short dry time comparing with natural dry time of 12 days. Also, the morphological characteristics of flowering plant in case of vacuum-freeze drying showed similar shape with real flower. The contraction decreased about 9% comparing with real flower under dry time of 72 hours. But the contraction in case of natural dry decreased 36% and showed noticeable difference. The brightness which affects physiological characteristics of dry flowering plant showed lower values according to the dry process and chromaticity was thick. After 4 days, natural dry was thick with about 2 times comparing with vacuum-freeze drying. In case of vacuum-freeze drying, the quantity of anthocyanin and chlorophyl which affect discoloration and bleaching of dry flowering plant showed the clear difference comparing with natural dry method due to the sublimation by vacuum after rapid freeze with short initial time.

• Conservation Science in Museum
• /
• v.11
• /
• pp.49-52
• /
• 2010

A wooden Comb excavated at Shinchang-dong wetland site was treated with cetylalcohol as a reinforcing agent. The conservation process was done by freeze drying the wooden artifact after substituting it with no.3 butyl alcohol and impregnating with 40wt% cetylalcohol solution. Consequently there was no noticeable surface damage. Also it showed 54% of remaining weight and a shrinkage of length 3.3%, width 2.1% and thickness 3.1%. Therefore using cetylalcohol for conservation of waterlogged archeological wood was effective dimensional stability and remaining weight.

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.111-115
• /
• 2009

This study was conducted to develop the ultrasonic dryer because present drying methods (heat convection, microwave, vacuum, etc.) could not improve the drying consumption energy, decrease of quality and drying ratio by physical limitation. The drying tests were conducted with four levels (No. 1 only non-heated air, No. 2 only ultrasonic, No. 3 only heated air and No. 4 ultrasonic with heated air) and measuring weight of samples after drying carrot and ginseng slices for 30 minutes. The result of test is that the drying ratio was highest in the level of No. 4 ultrasonic with heated air. The sliced carrot's drying ratio was 22.4% (w.b.)/h and sliced ginseng's drying ratio was 3.8% (w.b.)/h. The discoloration and twist of samples was appeared on using only heated air like No. 3.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.44-49
• /
• 2001

Low temperature vacuum drying technique shows very excellent energy efficiency and prominent drying performances compared with the conventional hot air drying technique. This study was focused on the thermal characteristics of the low temperature vacuum drying technique. From the results of this study, it was confirmed that the time consumption for drying with the new drying technique could be shortened to about 1/3 of the time consumption with the conventional hot air drying technique under the same drying conditions for wet products. Also, the maximum drying rate with the new drying technique reached to about $0.35kg/m^2h$ at about 400% of moisture content.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.05a
• /
• pp.353-357
• /
• 2005

난황으로부터 인지질을 회수하기 위하여 전처리, 표면반응분석기법을 실시한 결과 인지질 95%이상 PC함량 55%의 제품을 생산할 수 있는 공정을 확립하였다. 난황 인지질 분리조건(액난황 100g 기준)은 알코올 농도 91.38%, 알코올 첨가량 1: 7.3, 균질온도 $29.22^{\circ}C$, 균질시간 5분으로 한 후 원심분리한 다음 여과후 진공농축하고 아세톤 100ml로 1회 세척하고 나서 여과지로 여과하고 $100^{\circ}C$, 40분 건조하거나 $40^{\circ}C$ 진공건조기에서 overnight 정도 건조과정을 휘발시키는 것이 바람직한 것으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.33-40
• /
• 2008

Normally, cedar heartwood has a red color. However, it frequently changes black color (blackening phenomenon). It is reported that blackening phenomenon of cedar has been caused by oxidation of phenolics and norlignan extractives under weak alkaline conditions. In this study, heat treatment and UV irradiation were carried out to reduce the difference of color value between blackened wood and bright sap wood. Effects of temperature, moisture content, treatment time and light on decrease of color difference between blackened heartwood and sapwood were evaluated in each treatment. A decrement of different color value between blackened heartwood and bright sapwood by hot-water treatment was bigger than others. An effect of the vacuum drying was similar to that of the kiln drying. UV irradiation decreases the color difference between dried blackened heartwood and bright sapwood. It is suggested that UV irradiation could be used as final treatment to reduce the color difference on wood during drying process. Determination of optimum conditions and development of hybrid process for control of discoloration will be needed in a further study.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.07a
• /
• pp.136-141
• /
• 2000

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05a
• /
• pp.506-506
• /
• 2001

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.205.1-205.1
• /
• 2014

4세대 가속기 언듈레이터 진공용기는 길이가 6 m이고 내경이 $7{\times}11mm$로 매우 좁아서 내부 표면의 경면연마가 까다롭다. 미국이나 독일의 경우 입자유동연마 방법으로 표면 거칠기와 표면 산화막 두께를 요구되는 수준으로 낮췄다. 이 방법을 적용해 본 결과, 연질의 알루미늄 표면에 스크레치 및 피트 발생율이 높고 고비용에 처리시간이 길다는 단점이 있었다. 포항가속기에서는 입자유동연마와 병행하여 화학연마 방법으로 관경이 좁은 형상이나 길이에 구애받지 않고 긴 진공용기 크기의 약품조가 없이 표면연마 할 수 있는 장치를 고안하였다. 이 장치는 표면조도 개선 목적의 화학연마, 표면 산화막 두께 개선, 세척 및 건조장치가 한 시스템으로 구성되어 큰 약품조와 수세조가 필요하지 않다는 장점이 있어서 입자유동연마 공정을 대체할 수 있는 방법으로 기대된다. 본 발표에서는 화학연마 장치에 대해 소개하고 연마 전 후 표면조도와 산화막 개선 결과에 대해서 논하고자 한다.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.246-251
• /
• 2005

경산 임당유적에서 출토된 목제 갑옷틀은 수침된 상태로 출토된 목제유물로 재질이 매우 취약하여, 대기 중에 노출되면 급속도로 건조가 진행되어 곧바로 수축 변형이 일어나 유물로써 가치를 잃어버리게 된다. 특히 목제 갑옷틀은 오랜 매장기간동안 목질부의 분해가 많이 진행되어 재질이 취약할 뿐 아니라 원통목을 가공한 것이어서 건조 과정에서 수축변형이 발생우려가 높다. 따라서 목제 갑옷틀은 건조변형이 적고 치수안정화가 우수한 처리법을 적용하여야 한다. 따라서 목제 갑옷틀은 t-butanol 용액을 용제로 PEG#4000 40%로 함침 전처리 후 진공 동결건조법으로 보존처리 하였다.