• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 1997.06b
• /
• pp.8-10
• /
• 1997

종양은 아직 그 발생 원인과 기작이 정확히 밝혀져 있지 않으므로 정확한 정의를 내리는 것은 어려우나 일반적으로 종양이란 정상 세포가 갖고 있는 세포 분열의 특이성을 상실하여 일어나는 조직의 자율적인 과잉 성장을 말한다. 이와 같은 세포의 비정상적인 증식에 의한 종양을 임상 및 병리 형태학적으로 양서 종양과 악성종양으로 분류한다. 양성 종양을 일으키는 종양 세포는 정상 세포와 비슷할 뿐 아니라 그 주변 세포들과 확실한 경계를 이루고 있으며 증식도 느리며 다른 부위로의 전이가 없다. 이에 반해 악성종양은 일반적으로 증식도 빠르고 이형의 세포로서 주변의 조직으로 확산, 전이될 뿐만 아니라 최종적으로 숙주인 개체를 사망시킨다. 악성종양은 다시 상피 조직에서 유례한 암, 비상피 조직에서 유래된 육종, 백혈구에서 유래된 백혈병 등으로 구별하지만 그의 본질은 거의 같으며 모든 악성종양은 통속적으로 암이라고 불리운다. 종양의 발생원인으로 크게 3가지로 나눌 수 있는데 화학물질, 바이러스 및 유전적 요인에 의한 것으로 알려졌다. 최초의 발암물질로 알려진 benzopyrene에 의한 발암 등 연구에 의해 화학적 발암원들은 직접 발암 물질로 작용하는 것이 아니라, 일단 체내에서 대사된 후 이들 대사 산물일 DNA 등에 작용함으로써 발암이 유도 되는 것으로 밝혀졌다. 이와 같이 화학적 변화를 거친 후에야 DNA에 영향을 미치는 것외에 다른 화학물질들은 또 다른 기작을 통해 암을 유발하는데 쥐의 피부에 benzopyrene을 한 번 처리하면 암을 유발하지 않으나 여기에 phorbol ester를 처리하면 높은 빈도로 암이 형성된다. 여기서 benzopyrene과 같이 세포의 DNA에 돌연변이를 일으키는 작용을 하는 발암물질을 발암개시제라 하고 phorbol ester처럼 그 자체로는 발암능이 없으나 발암개시제에 노출된 세포에 영향을 미쳐 발암능을 크게 강화시켜 주는 것을 발암촉진제라고 한다. 암은 세포증식 제어계에 DNA가 이상을 일으킨 현상을 말하는 데 이와 같은 DNA의 변형된 유전정보에 의해 암과 관련된 단백질을 합성하므로 이 DNA를 암유전자라 부르며 바이러스에서 유래된 것을 V-one 그리고 세포에서 유래된 것을 c-one이라 한다. 암유전자는 본래 암을 형성하기 위한 것이 아니라 증식제어 유전자로서 변이나 비정상으로 활성화 됨으로써 암을 유발시키므로 proto-oncogene이라 부른다. 또한 고등동물의 유전자 중에는 세포성장을 억제하는 유전자들이 있으며 이들은 세포의 성장 생존 분화를 조절하는 것으로 생각되고 있다. 따라서 이들 유전자는 세포의 암변형을 억제하는 기능을 가지고 있다. 이들 유전자의 이상으로 세포성장 억제기능이 상실되면 세포의 과잉 성장이 초래되면 결과적으로 암으로 유발하는 것으로 추측되고 있다. 최근의 연구에 의하면 암세포에서 암억제 유전자의 이상과 암유전자의 활성화가 함께 발견 되면서 정상세포가 암으로 변형되는 과정에는 암억제 유전자의 이상과 암유전자의 활성화가 동시에 관여한 가능성이 높은 것으로 알려져 있다. 정상 세포가 암을 유발하기 위해서는 발암의 다단계설에서와 같이 여러 단계의 변과가 필요한데 여러 가지 요인에 의해 정상세포의 염색체가 변화되어 정상세포들이 가지고 있는 세포분열의 특이성을 상실하고 증식이 빠르고 저항력이 강한 세포가 선택 되어지고 비정상 서ㅔ포으 과잉 분여러에 의해 종양이 형성되며 이어서 혈관의 신생을 촉진하는 맥관형성, 전이 등이 과정을 거쳐 신체의 다른 부위로 전이된다. 20세기 초까지는 암은 노화와 함께 자연발생적으로 일어나는 피할 수 없는 질병으로 여겨졌으며 그 치료도 조기에 발견된 암환자에게 외과적인 치료를 하는 것이 최선의 방법 이었다. 그러나 현재에는 암환자의 80% 이상이 환경적 요인에 의해 암이 발생 된다고 믿어지고 있다. 과거 치료에 중점을 둔 것에서 점차 예방의 가능성과 그 방법의 모색에 관심을 갖게 되었으며 치료적인 면에서도 외과적 수술 이외에 방사선 치료, 항암제의 투여 등 약물요법, 면역요법의 이용 이외에 더 나아가 gene theraph 및 tumor vaccines 개발에 대한 관심도 증가되고 있다. 국제암연구협회에서는 인간에게 발암이 가능한 물질의 종류를 정기적으로 발표하고 있는데 지금까지 발암 가능성이 높다고 널리 알려진 위험요인을 크게 나누어 보면 다음과 같다. 흡연, 음주, 식이요인, 호르몬 및 기타 요인으로 약물, 자외선 등을 들 수 있는데 현재까지 이들 요인에 의한 발암 기작이 완전히 규명된 것은 아니지만 이들에 의한 발암의 확률이 높다는 것은 사실이므로 이 위험요인에 노출되는 것을 방지함으로써 암발생을 예방할 수 있을 것이다. 암발생의 예방법으로는 암발생 자체를 예방하는 것과 이미 발생한 암환자를 조기 발견하고 치료하는 방법이 있을 수 있다. 현재까지의 여러 연구 결과들을 보면 유전적인 요인을 제외한 대부분의 발암 위험인자들은 개개인의 생활습관과 밀접히 관련되어 있음을 알 수 있다. 이를 바탕으로 1992년 대한 암협회에서는 '암 예방 14개 권장 사항'을 발표하여 국민 홍보활동을 하고 있는데 그 내용의 반 이상이 식생활 습관과 관련되어 있을 정도이므로 암예방에 있어서의 식품의 역할이 매우 크다 할 수 있다. 따라서 건전한 생활습관과 더불어 적절한 식품의 섭취는 암예방을 위한 기본이 될 것이다.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.55-62
• /
• 2006

Transverse cracks in continuously reinforced concrete pavement (CRCP) occur at early ages due to temperature and moisture variations. The width and spacing of transverse cracks have a significant effect on pavement performance such as load transfer efficiency and punchout development. Also, crack widths in CRCP depend on 'zero-stress temperature,' which is defined as a temperature where initial concrete stresses become zero, as well as drying shrinkage of concrete. For good long-term performance of CRCP, transverse cracks need to be kept tight. To keep the crack widths tight throughout the pavement life, zero-stress temperature must be as low as practically possible. Thus, temperature control at early ages is a key component In ensuring good CRCP performance. In this study, concrete temperatures were predicted using PavePro, a concrete temperature prediction program, for a CRCP construction project, and those values were compared with actual measured temperatures obtained from field testing. The cracks were also surveyed for 12 days after concrete placement. Findings from this study can be summarized as follows. First, the actual maximum temperatures are greater than the predicted maximum temperature in the ranges of 0.2 to 4.5$^{\circ}C$. For accurate temperature predictions, hydration properties of cementitious materials such as activation energy and adiabatic constants, should be evaluated and accurate values be obtained for use as input values. Second, within 24 hours of concrete placement, temperatures of concrete placed in the morning are higher than those placed in the afternoon, and the maximum concrete temperature occurred in the concrete placed at noon. Finally, from the 12 days of condition survey, it was noted that the rate of crack occurrence in the morning placed section was 25 percent greater than that in the afternoon placed section. Based on these findings, it is concluded that maximum concrete temperature has a significant effect on crack development, and boner concrete temperature control is needed to ensure adequate CRCP performance.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.50-60
• /
• 2010

For the last half a century, the personal computer and software industries have been prosperous due to the incessant evolution of computer systems. In the 21st century, the embedded system market has greatly increased as the market shifted to the mobile gadget field. While a lot of multimedia gadgets such as mobile phone, navigation system, PMP, etc. are pouring into the market, most industrial control systems still rely on 8-bit micro-controllers and simple application software techniques. Unfortunately, the technological barrier which requires additional investment and higher quality manpower to overcome, and the business risks which come from the uncertainty of the market growth and the competitiveness of the resulting products have prevented the companies in the industry from taking advantage of such fancy technologies. However, high performance, low-power and low-cost hardware and software platforms will enable their high-technology products to be developed and recognized by potential clients in the future. This paper presents such a platform for industrial embedded systems. The platform was designed based on Telechips TCC8300 multimedia processor which embedded a variety of parallel hardware for the implementation of multimedia functions. And open-source Embedded Linux, TinyX and GTK+ are used for implementation of GUI to minimize technology costs. In order to estimate the expected performance and power consumption, the performance improvement and the power consumption due to each of enabled hardware sub-systems including YUV2RGB frame converter are measured. An analytic model was devised to check the feasibility of a new application and trade off its performance and power consumption. The validity of the model has been confirmed by implementing a real target system. The cost can be further mitigated by using the hardware parts which are being used for mass production products mostly in the cell-phone market.

• Journal of agriculture & life science
• /
• v.53 no.2
• /
• pp.121-129
• /
• 2019

This study carried out to determine control factors for the improvement of productivity of laying hens suffering heat stress during hot weather. A total of 48,451 ISA Brown layers were housed in a farm located in Gyeongsangnam-do, Republic of Korea. Five thermo-hydrometer loggers were installed inside the house to collect data of dry-bulb temperature and relative humidity. The experiment continued for 81 days when the summer season begins from 19th June to 7th September, 2018. This study analyzed the correlations among layers' production index and daily average, highest, and lowest temperature; daily average, highest, and lowest relative humidity; and daily average, minimum, and maximum THI. The result indicated that feed consumption, hen-day egg production, egg weight, and FCR decreased as the daily average, highest and lowest dry-bulb temperature and THI rise (p<0.01). On the other hand, water intake increased as the daily average, highest and lowest dry-bulb temperature and THI rise (p<0.001). The relative humidity was not considered to have direct correlations to the layers' production index (p>0.05). However, it was noticeable that the mortality did not have significant relations with daily average and highest temperature; THI; or daily average, highest and lowest relative humidity while it was relevant to the daily lowest temperature and THI (p<0.05). In conclusion, to enhance the productivity of laying hens in a hot climate, it is recommended that daily average, highest, and lowest dry-bulb temperature and THI are maintained as low as possible. Especially, the daily lowest temperature is needed to lower to 20℃, which is the lowest critical temperature for layers.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.7-7
• /
• 2023

Currently, the main technologies of various fourth industries are big data, the Internet of Things, artificial intelligence, blockchain, mixed reality (MR), and drones. In particular, "digital twin," which has recently become a global technological trend, is a concept of a virtual model that is expressed equally in physical objects and computers. By creating and simulating a Digital twin of software-virtualized assets instead of real physical assets, accurate information about the characteristics of real farming (current state, agricultural productivity, agricultural work scenarios, etc.) can be obtained. This study aims to streamline agricultural work through automatic water management, remote growth forecasting, drone control, and pest forecasting through the operation of an integrated control system by constructing digital twin data on the main production area of the nojinot industry and designing and building a smart farm complex. In addition, it aims to distribute digital environmental control agriculture in Korea that can reduce labor and improve crop productivity by minimizing environmental load through the use of appropriate amounts of fertilizers and pesticides through big data analysis. These open-field agricultural technologies can reduce labor through digital farming and cultivation management, optimize water use and prevent soil pollution in preparation for climate change, and quantitative growth management of open-field crops by securing digital data for the national cultivation environment. It is also a way to directly implement carbon-neutral RED++ activities by improving agricultural productivity. The analysis and prediction of growth status through the acquisition of the acquired high-precision and high-definition image-based crop growth data are very effective in digital farming work management. The Southern Crop Department of the National Institute of Food Science conducted research and development on various types of open-field agricultural smart farms such as underground point and underground drainage. In particular, from this year, commercialization is underway in earnest through the establishment of smart farm facilities and technology distribution for agricultural technology complexes across the country. In this study, we would like to describe the case of establishing the agricultural field that combines digital twin technology and open-field agricultural smart farm technology and future utilization plans.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.99-110
• /
• 2012

The purpose of the study is to collect basis data for to establish standard administrative processes of liquid fertilizer treatment. From this survey we could make out the key point of each step through a case of effective liquid manure treatment system in pig house. It is divided into six step; 1. piggery slurry management step, 2. Solid-liquid separation step, 3. liquid fertilizer treatment (aeration) step, 4. liquid fertilizer treatment (microorganism, recirculation and internal return) step, 5. liquid fertilizer treatment (completion) step, 6. land application step. From now on, standardization process of liquid manure treatment technologies need to be develop based on the six steps process.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.19-28
• /
• 2005

In this paper, we proposed a parallel fast 2-D discrete wavelet transform hardware architecture based on lifting scheme. The proposed architecture improved the 2-D processing speed, and reduced internal memory buffer size. The previous lifting scheme based parallel 2-D wavelet transform architectures were consisted with row direction and column direction modules, which were pair of prediction and update filter module. In 2-D wavelet transform, column direction processing used the row direction results, which were not generated in column direction order but in row direction order, so most hardware architecture need internal buffer memory. The proposed architecture focused on the reducing of the internal memory buffer size and the total calculation time. Reducing the total calculation time, we proposed a 4-way data flow scheduling and memory based parallel hardware architecture. The 4-way data flow scheduling can increase the row direction parallel performance, and reduced the initial latency of starting of the row direction calculation. In this hardware architecture, the internal buffer memory didn't used to store the results of the row direction calculation, while it contained intermediate values of column direction calculation. This method is very effective in column direction processing, because the input data of column direction were not generated in column direction order The proposed architecture was implemented with VHDL and Altera Stratix device. The implementation results showed overall calculation time reduced from $N^2/2+\alpha$ to $N^2/4+\beta$, and internal buffer memory size reduced by around $50\%$ of previous works.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.403-418
• /
• 2007

The objective of this research was to characterize the fate and transport of Cr(VI) contaminated groundwater in the Daejeon industrial area. Five subsidiary monitoring wells were newly installed and two existing wells were utilized for the investigation and the reduction process of Cr(VI) contaminated groundwater of the Daejeon(Mun-pyeong) national groundwater monitoring station. The Cr(VI) concentrations at the shallow aquifer well of the station were in the range of 3.2-4.5 mg/L indicating continuous contamination. However, Cr was not detected at the deep bedrock well and the other monitoring wells except MPH-1 and 3. The Cr(VI) concentrations of MPH-1 and MPH-3 were below the drinking water guideline value (0.05 mg/L). Therefore, the plume of the Cr(VI) contaminated groundwater was predicted to be confined within the narrow boundary around the station. The soluble/exchangeable Cr(VI) concentrations were below the detection limit in all core and slime samples taken from the five newly installed wells. Although the exact source of contamination was not directly detected in the study area, the spatial Cr(VI) distribution in groundwater and characteristics of the core samples indicated that the source and the dispersion range were confined within the 100 m area from the monitoring station. The contamination might be induced from the unlined landfill of industrial wastes which was observed during the installation of an subsidiary monitoring well. For the evaluation of the natural attenuation of Cr(VI), available reduction capacities of Cr(VI) with an initial concentration of 5 mg/L were measured in soil and aquifer materials. Dark-gray clay layer samples have high capacities of Cr(VI) reduction ranging from 58 to 64%, which is obviously related to organic carbon contents of the samples. The analysis of reduction capacities implied that the soil and aquifer materials controlled the dispersion of Cr(VI) contamination in this area. However, some possibilities of dispersion by the preferential flow cannot be excluded due to the limited numbers of monitoring wells. We suggest the removal of Cr(VI) contaminated groundwater by periodical pumping, and the continuous groundwater quality monitoring for evaluation of the Cr(VI) dispersion should be followed in the study area.

• KSBB Journal
• /
• v.24 no.6
• /
• pp.541-548
• /
• 2009

For investigation of anti-angiogenesis mechanism of Anthrisci radix, Psoraleae semen, Siegesbeckiae herba and Corni fructus, anti-cell adhesion experiment was performed. The adhesion of U937 cells to IL-$1\beta$-stimulated HUVECs was completely suppressed by 276% at 0.2 mg/L of Anthrisci radix, 220% at 5 mg/L of Psoraleae semen, 158% at 10 mg/L of Siegesbeckiae herba and 132% at 20 mg/L of Corni fructus, respectively. And the adhesion of PMA-chemical stimulated U937 cells to HUVECs, it was inhibited 139% at 0.2 mg/L of Anthrisci radix, 442% at 5 mg/L of Psoraleae semen, 720% at 10 mg/L of Siegesbeckiae herba and 664% at 20 mg/L of Corni fructus. Also, the adhesion of chemical stimulated U937 cells to IL-$1\beta$/chemical stimullated HUVECs, it was inhibited by 286% at 0.2 mg/L of Anthrisci radix, 146% at 5 mg/L of Psoraleae semen, 436% at 10 mg/L of Siegesbeckiae herba and 297% at 20 mg/L of Corni fructus, respectively. It would be a useful substance for anti-cell adhesion based on anti-angiogenesis for anti-obesity and anti-cancer.