• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.490-494
• /
• 2007

본 논문에서는, 한 장의 저해상도 영상으로부터 고해상도 영상을 생성하는 새로운 방법을 제안한다. 제안하는 방법은 고해상도 영상과 저해상도 영상의 관계를 나타내는 선형연립방정식을 푸는 원리에 기초한다. 하지만 이러한 방정식은 일의적으로 정해지지 않기 때문에 고해상도 영상을 나타내기 위챈 사용된 미지수를 축소하기 위한 이산코사인변환(DCT)의 에너지 집중특성을 이용하였다. 또한 그 구현방법으로 저해상도 영상을 일련의 작은 블록으로 나누어 각 블록영상에 적용하는 블록분할법(block division method)과 전체프레임 영상에 직접 적용하는 전 프레임법(full frame method)을 사용하였다. 최종적으로 본 제안방법의 유효성을 확인하기 위해 시뮬레이션 실험영상에 적용한 결과 양호한 결과를 나타냈다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.159-165
• /
• 1997

Because CCD camera acquires the digital images without separate processing, its availabilities are increased. In this study, for CCD camera calibration DLT equation and radial or decentering distortion equation are combined and the calibration parameters are calculated using three dimensional test model. The digital images acquired by CCD camera are matched using coefficient of correlation and the three dimensional coordinates of objects are determined. Also, the potential usefulness of CCD camera in close range photogrammetry is examined.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.499-503
• /
• 2013

자동차를 위한 전방향(omni-directional) 감시 시스템, 로봇의 시각 역할 등 다양한 비전 시스템에서 카메라가 장착되어 사용되고 있다. AVM(Around View Monitoring) 시스템에서 그리드 패턴의 코너를 검출하기 위해서는 먼저, 광각 카메라에서 획득한 비선형적인 방사 왜곡을 가진 영상의 왜곡 보정 작업을 수행하여야 한다. 이후에 왜곡이 보정된 영상 내부의 그리드 패턴 각 코너들을 자동으로 검출하기 위해서 Sub-Pixel, 허프 변환 등의 여러 가지 방법이 있으며 현재 출시된 AVM 시스템에 직선이나 교점 및 코너 검출을 위해 사용되고 있다. 본 논문에서는 왜곡 보정 영상을 입력 영상으로 받아 그리드 패턴의 코너를 자동으로 검출하는 프로그램을 설계한다. 제안하는 코너 검출 방법을 직접 구현하여 성능을 평가함으로써 AVM 시스템에서 코너를 검출하는 부분에 적용시킬 수 있음을 보인다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.8
• /
• pp.514-521
• /
• 2000

This paper presents a direct thrust control scheme for permanent magnet linear synchronous motor(PMLSM) by using digital signal processor(DSP). And a simulation method for the direct thrust control of a permanent magnet linear synchronous motor using the equivalent circuit is presented. The detent force that was obtained by cubic spline method is considered in the simulation. Thrust correction coefficient is utilized to estimate actual thrust on the direct thrust control, which considers the longitudinal end effect due to the finite core length of the permanent magnet linear synchronous motor. The motor self inductance, the initial flux linkage by the permanent magnet is calculated in advance by the finite element analysis, and then the direct control simulation is carried out. As the results, thrust, current and speed are shwon.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.615-618
• /
• 2006

The broadband power detector for direct- onversion Six-port output circuit was designed and implementaed in this paper. The power detector should linearly operated to produce the linear amplitude and phase signal fer input RF signal in required broadband. So, the power detector should be designed under conditions of matching circuit with low VSWR. The designed power detectors, which were implemented in L-band with 50 ohm matching and Ku-band with matching circuit and isolator, respectively, were evaluated in the performances.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.3
• /
• pp.11-22
• /
• 2010

An analysis method is proposed for the transient linear or nonlinear analysis of dynamic interactions between a flexible dam body and reservoir impounding compressible water under earthquake loadings. The coupled dam-reservoir system consists of three substructures: (1) a dam body with linear or nonlinear behavior; (2) a semi-infinite fluid region with constant depth; and (3) an irregular fluid region between the dam body and far field. The dam body is modeled with linear and/or nonlinear finite elements. The far field is formulated as a displacement-based transmitting boundary in the frequency domain that can radiate energy into infinity. Then the transmitting boundary is transformed for the direct coupling in the time domain. The near field region is modeled as a compressible fluid contained between two substructures. The developed method is verified and applied to various earthquake response analyses of dam-reservoir systems. Also, the method is applied to a nonlinear analysis of a concrete gravity dam. The results show the location and severity of damage demonstrating the applicability to the seismic evaluation of existing and new dams.

• Geophysics and Geophysical Exploration
• /
• v.2 no.1
• /
• pp.17-25
• /
• 1999

A traveltime tomography has been carried out by transforming electromagnetic data in frequency domain to wave-like domain. The transform uniquely relates a field satisfying a diffusion equation to an integral of the corresponding wavefield. But direct transform of frequency domain magnetic fields to wave-field domain is ill-posed problem because the kernel of the integral transform is highly damped. In this study, instead of solving such an unstable problem, it is assumed that wave-fields in transformed domain can be approximated by sum of ray series. And for further simplicity, reflection and refraction energy compared to that of direct wave is weak enough to be neglected. Then first arrival can be approximated by calculating the traveltime of direct wave only. But these assumptions are valid when the conductivity contrast between background medium and the target anomalous body is low enough. So this approach can only be applied to the models with low conductivity contrast. To verify the algorithm, traveltime calculated by this approach was compared to that of direct transform method and exact traveltime, calculated analytically, for homogeneous whole space. The error in first arrival picked by this study was less than that of direct transformation method, especially when the number of frequency samples is less than 10, or when the data are noisy. Layered earth model with varying conductivity contrasts and inclined dyke model have been successfully imaged by applying nonlinear traveltime tomography in 30 iterations within three CPU minutes on a IBM Pentium Pro 200 MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.91-96
• /
• 2011

In this paper, a low-power direct-conversion transmitter based on current-mode operation, which satisfies the IEEE 802.15.4 standard, is proposed and implemented in a $0.13{\mu}m$ CMOS technology. The proposed transmitter consists of DACs, LPFs, variable gain I/Q up-conversion mixer, a divide-by-two circuit with LO buffer, and a drive amplifier. By combining DAC, LPF, and variable gain I/Q up-conversion mixer with a simple current mirror configuration, the transmitter's power consumption is reduced and its linearity is improved. The drive amplifier is a cascode amplifier with gain controls and the 2.4GHz I/Q differential LO signals are generated by a divide-by-two current-mode-logic (CML) circuit with an external 4.8GHz input signal. The implemented transmitter has 30dB of gain control range, 0dBm of maximum transmit output power, 33dBc of local oscillator leakage, and 40dBc of the transmit third harmonic component. The transmitter dissipates 10.2mW from a 1.2V supply and the die area of the transmitter is $1.76mm{\times}1.26mm$.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1149-1160
• /
• 2019

In this study, two radiometric correction methods deriving reflectance from UAV multispectral image for monitoring forest vegetation were applied and evaluated. Multispectral images were obtained from a small multispectral camera having 5 spectral bands. Reflectance were derived by applying the two methods: (1) the direct method using downwelling irradiance measurement and (2) the empirical line correction method by linking a set of field reflectance measured simultaneous with the image capture. Field reflectance were obtained using a spectroradiometer during the flight and used for building the linear equation for the empirical method and for the validation of image reflectance derived. Although both methods provided the high correlations between field reflectance and image-derived reflectance, their distributions were somewhat different. While the direct method provided rather stable and consistent distribution of reflectance all over the entire image area, the empirical method showed very unstable and inconsistent reflectance distribution. The direct method would be more appropriate for relatively wide area that requires more time to acquire image and may vary in downwelling irradiance and atmospheric conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.115-124
• /
• 2001

In this paper, authors propose a new nonlinear rotor flux observer for rotor field oriented control of an induction motor which is designed based on the extended Luenberger Observer theory. Extended Luenberger Observer requires minimal solution of nonlinear partial differential equation on its coordinate transformation and linearization needed on a nonlinear observer design in general. The proposed rotor flux observer is derived from the 2 phase model of induction motor on the orthogonal coordination and it has the reduce gain matrix. Simulation and experimentation were performed under the conventional indirect vector control and direct vector control with the proposed observer at different rotor resistance. Simulation results show that the convergence of the proposed observer is influenced by the chosen eigenvalues. Experimentation results on load operation show the direct vector control with the proposed observer is better than the indirect vector control to maintain the characteristics of the vector control.