• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4561-4568
• /
• 2011

In this paper, carrier comparison PWM method for voltage control of Vienna rectifier is discussed. In general, in industrial and communications applications, the two-level rectifier is used. However, this two-level rectifier has the limit of high THD and low efficiency. So, the studies of three-level rectifier has been carried out so far, and the Vienna rectifier circuit is the representative. The space vector pulse width modulation(SVPWM) method is generally used for Vienna rectifier, in which voltage vectors and duration time are calculated from the voltage reference. However, this method require very sophisticated and complex calculations, so realizing this method by software is very difficult. To overcome this disadvantage, simple carrier comparison PWM method for Vienna rectifier is proposed which is modified from the carrier comparison method for 3 level inverter. Furthermore, to verify the usefulness of the Vienna rectifier carrier comparison PWM the simulation and experiment are carried out.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.6
• /
• pp.559-565
• /
• 2004

Two different methods were used for the scattering analysis of side-drilled holes(SDH). The scattering models include an explicit model based on the Kirchhoff approximation and the solution of the exact separation of variables. The far-field scattering amplitude was calculated and their time-domain results were compared for the case of shear vertical wave. The exact solution predicts the existence of the creeping wave. The Kirchhoff approximation agreed to the exact solution, except the case of the creeping wave. Two measurement models were introduced to predict the response from the SDHs for the case of immersion, pulse-echo testing. The received voltage was calculated for the case of the shear vertical waves with the incident angle of $45^{\circ}$ to the SDH with the diameter of 1mm, and compared with the experimental results.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.293-298
• /
• 2007

A new way to integrate various geophysical information for evaluation of RQD was developed. In this study, we does not directly define the RQD value where borehole data are not sampled. Instead, we infer the probability of RQD values with prior probability of data directly obtained from borehole, and secondary supporting probability from resistivity and seismic tomography data. First, we applied the geostatstical indicator kriging to get prior probability of RQD value, and indicator kriging with soft data to get the supporting probability from resistivity and seismic data. And we finally applied the permanence ratio rule to integrate these information. The finally obtained result was also analyzed to fully utilize the probabilistic features. For example, we showed the probability of wrongly classifying the RQD evaluation and vice versa. This kind of analytical result may be used for decision making process based on the geophysical exploration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1108-1119
• /
• 2016

This paper presents the spectral analysis and radiation pattern of low-frequency electromagnetic(EM) leakage signals according to the fundamental operations of smartphones. The EM leakage signals generated by the activation of four I/O sensor modules such as a touch-screen, a camera, a microphone and a speaker are captured by the commercial near-field magnetic probe with 1cm spatial resolution. The analysis results show that the leakage of the EM wave occurs strongly around the activated I/O sensor modules, AP(Application Processor) and memory modules. Also, the distinguishable frequency characteristic is shown in each spectrum of EM leakage signals.

• Fire Science and Engineering
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2015

In this study, the damages of high strength concrete exposed to high temperature have been evaluated by the impact echo method. Elastic wave velocity and dynamic modulus of elasticity were measured by the impact echo method, and the compressive strength and the static modulus of elasticity were measured by the compression testing method after exposure to high temperature. The results showed that elastic wave velocity has a linear correlation with the compressive strength and dynamic modulus of elasticity has a linear correlation with static modulus of elasticity. Based on results, it is concluded that the impact echo method can be effectively applied to evaluate the mechanical properties of fire damaged high strength concrete.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.548-552
• /
• 2005

새만금호의 완공이후 내부 개발이 완료된 시점에서 만경강 및 동진강 홍수량 유입이 담수호의 수위 및 유속등 수리특성에 어떠한 변화를 가져올 것인가를 평가하기 위한 수치실험이 내부 관리수위(DL=-0.5m, DL=-1.0m, DL=-1.5m)별로 실시되었다. 홍수파의 전파에 따른 동적거동을 이상적으로 모의하기 위해서 본 연구에서는 2차원 수심적분의 모형인 ADCIRC 모형을 새만금 하구호에 적용하였다. 상류의 유입 경계조건으로는 50년 빈도의 홍수수문곡선도를 사용하여 만경강과 동진강의 유입량이 30분 간격으로 변화되는 홍수량을 이용하였다. 하류의 경계조건으로는 신시 수문이 외해의 조위와 내부 관리수위와 연동되어 외조위가 낮아질 때만 수문이 열리는 조건을 설정하는 동적인 경계조건이 설정되었다. 홍수 계산은 4일에 걸쳐 실시되어 새만금호 내부에서 수위와 유속의 변화를 관찰하였다. 만경수계내 홍수파의 동적 거동은 시간이 경과함에 따라 홍수파가 하류로 전파되어 수위와 유속 변화가 크게 나타난다. 만경강 유입부에서는 홍수수문곡선의 시간적 변화가 민감하게 작용하는 반면, 홍수파 전파가 하류로 진행하면서 유입부에서 높아졌던 수위가 새만금호 내부에서는 점차 낮아지면서 안정화 되는 것을 보여주고 있다. 그러나 수문이 위치한 지점에서는 유입 홍수에 의한 영향은 거의 나타나지 않고, 신시수문의 개방에 따라 동적으로 변동되는 것이 지배적이다. 유속 모의 결과 상류 수로부에서는 $1.8m/s\~0.5m/s$로 나타나지만 새만금호에 진입하면서 $0.5m/s\~0.2m/s$의 낮은 유속으로 변한다. 신시 갑문 인근에서는 수문을 닫을 때 일시적인 충격파가 내부로 전파되면서 와동현상을 보이는 등 유속과 수위 변화에 있어 동적으로 복잡한 거동을 보이는 것으로 해석 된다.한 영향을 미치는 인자에 대한 이론적인 분석을 수행하고, 배수갑문 개방에 의한 수질개선효과를 최대화하기 위한 환경관리 방안 제시에 중점을 두어 수행하였다.ncy), 환경성(environmental feasibility) 등을 정성적으로(qualitatively) 파악하여 실현가능한 대안을 선정하였다. 이렇게 선정된 대안들은 중유역별로 검토하여 효과가 있을 것으로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.113-128
• /
• 1990

In recent years, various types of coastal protection scheme have been studied around the coastal region. Among them, so-called zonal protection systems are being watched with interest from various points of view. In this paper, wave overtopping rate from overflowing the vertical seawall is investigated by conducting two dimensional model on the horizontal bed experiment. Hereafter this system is referred to as a artificial reef system. One is the foundation to control wave height near the surfzone and the other is function to prevent coastal disaster by suppressing net overtopping rate. The main results obtained in this study are summarized as follows. 1) Wave attenuation taken place on the artificial reef can be predicted numerically by using energy dispersion model due to wave breaking proposed by Battjes. 2) To evaluate the wave overtopping rate from a vertical seadike on various coastal constructions by weir model, a numerical procedure for prediction of overtopping is confirmed.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.65-74
• /
• 2014

Borehole investigation which is mainly used to figure out geotechnical characterizations at construction work has the benefit that it provides a clear and convincing geotechnical information. But it has limitations to get the overall information of the construction site because it is performed at point location. In contrast, geophysical measurements like seismic survey has the advantage that the geological stratum information of a large area can be characterized in a continuous cross-section but the result from geophysics survey has wide range of values and is not suitable to determine the geotechnical design values directly. Therefore it is essential to combine borehole data and geophysics data complementally. Accordingly, in this study, a three-dimensional spatial interpolation of the cross-sectional distribution of seismic refraction was performed using digitizing and geostatistical method (krigring). In the process, digital map were used to increase the trustworthiness of method. Using this map, errors of ground height which are broken out in measurement from boring investigation and geophysical measurements can be revised. After that, average seismic velocity are derived by comparing borehole data with geophysical speed distribution data of each soil layer. During this process, outlier analysis is adapted. On the basis of the average seismic velocity, integrated analysis techniques to determine the three-dimensional geological stratum information is established. Finally, this analysis system is applied to dam construction field.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.214-216
• /
• 2022

Distributed acoustic sensing (DAS), an increasingly growing acquisition technique in the oil and gas exploration and seismology fields, has been used to record seismic signals using optical cables as receivers. With the development of imaging methods for DAS data, full waveform inversion (FWI) is been applied to DAS data to obtain high-resolution property models such as P- and S-velocity. However, because the DAS systems measure strain from the phase distortion between two points along optical cables, DAS data must be transformed from strain to particle velocity for FWI algorithms. In this study, a plane-wave FWI algorithm based on the relationship between strain and horizontal particle velocity in the plane-wave assumption is proposed to apply FWI to DAS data. Under the plane-wave assumption, strain equals the horizontal particle velocity, which is scaled by the velocity at the receiver position. This relationship was confirmed using a numerical experiment. Furthermore, 4-layer and modified Marmousi-2 velocity models were used to verify the applicability of the proposed FWI algorithm in various survey environments. The proposed FWI was implemented in land and marine survey environments and provided high-resolution P- and S-velocity models.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.62-73
• /
• 2001

In this paper, performance of DSRC systems is analyzed with considering the real roads and height of vehicles. The channels are modeled as 2-Ray and 4-Ray with a direct wave and reflected waves by a road and buildings in a physical layer because DSRC keeps LOS propagation characteristics, and the pass loss for each model is calculated respectively. Rician factor is obtained through the calculated path loss on two models for DSRC, and the performance of the systems is analyzed in AWGN and Rician fading channels, Impulsive noise and Rician fading channels respectively. As a result, in Rician fading channels with impulsive noise(A=0.2, ${\Gamma}^{\prime}=0.22$), BER is below $10^{-6}$ when the distance is farther than 80[m] and 40[m] in 2-Ray model and 4-Ray model respectively. For performance improvement, BCH coding scheme and MRC diversity scheme are adopted.