• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.460-463
• /
• 2004

본 논문은 고에너지 방사선 검출을 위한 흔합형 구조의 방사선 센서를 제작, 반응 특성을 평가하였다. 먼저, 스크린 인쇄법을 이용하여 형광체 필름을 제작하였으며, 발광스펙트럼(PL, Photoluminescence) 및 잔광 시간(decay time) 측정을 통하여 형광체의 발광 특성을 조사하였다. 제작된 혼합구조의 방사선 센서는 $2{\mu}m$ 두께의 $HgI_2$와 $150{\mu}m$ 두께의 형광체 필름으로 제작되었으며, 면적은 $2\;cm\;{\times}\;2\;cm$이다. 방사선에 대한 전기적 검출 신호의 특성을 조사하기 위해 인가전압에 따른 암전류 및 방사선민감도, 선량에 따른 검출신호를 측정하였다. 측정결과, 제작된 $HgI_2$ 필름은 방사선에 의해 형광체에서 방출된 가시광 파장을 잘 흡수하였으며, 진단영역의 저에너지 방사선에 의해 직접 전기적 신호를 발생시켜 높은 방사선 민감도를 보였다. 뿐만 아니라, 인가전압에 대해 $10\;pA/mm^2$이하의 낮은 암전류를 가졌으며, 넓은 조사선량에서 우수한 선형성을 보였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.553-559
• /
• 2003

PDP rib is one of the important parts of manufacturing process and the sintering degree of rib plays an important role to prevent some problems such as cross talk. Nowadays, the screen-printing method, which is a low price and high production, is used to make a rib. However, it is hard to judge and value the sintering ratio of sintered body itself. In this study, we measured the sintering degree by the dielectric breakdown of pores with the potentiostat. We conformed that this has similar tendency to density of sintered samples and an error being expected by open and closed pores was inspected by change of the microstructure to scanning electron microscope. This result showed that the sintering degree of PDP rib could be analyzed into the electro-chemical method.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.33-38
• /
• 2006

Aerosol slurry composed of dielectric materials, distilled water, and deflocculants was sprayed on the substrates, through a high-pressure spray gun as an aerosol. The coated layers were cofired together with $Al_{2}O_{3}$ substrates and green sheets on which the inner connectors were printed. Although the coating rate of coated layers strongly depended on slurry viscosity, spray shape, and the pressure of the spray gun, the coated density was not changed. Buried conductors were maintained as printed by high pressure spray coating method, because the pressing process was not used. At the optimum condition of air controller step 3-4 and slurry viscosity c.p 2000-4000, dense and uniform layers could be achieved. Comparing with conventional lamination process using green sheets, spray coating method enabled thin dielectric layers of $20{\sim}50{\mu}m$.

• Journal of The Korean Association of Information Education
• /
• v.16 no.1
• /
• pp.143-150
• /
• 2012

The choice of occupation has a great deal of influences on achievement of self-realization and living a good life in an individual's life. Especially, it is very significant for Elementary school students because they become to aware of career and develop. However, in the present, the career guidance is mainly concentrated in the solitary work, such as an aptitude test and printed materials. The perspective from the student, therefore, needs systematic and efficient system to accumulate activities and result of their various career guidance for individual career-related information. The system to improve elementary school student's career awareness based on e-portfolio has been developed. The developed system can effectively accumulate students' activities and result of their various career guidance and easily grasp their strengths and weaknesses of intelligence based on theory of multiple intelligences. Teacher also can easily grasp their student's talent through all sorts of graphs provided by the web site for career education.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.140-147
• /
• 2011

In this paper, we propose a novel feeding method that uses a windshield ground in a vehicle. The feeding method enables for various antennas to integrate easily in a vehicle windshield. To connect a coaxial feeding cable directly to the windshield ground, we inserted a coaxial-to-ground adapter between the cable and the ground, and reflection coefficients using the proposed feeding method were compared to that using a conventional feeding method. The size and position of the windshield ground were optimized in order to achieve a high radiation gain in the azimuth direction. Then the triangular WiBro patch antenna, incorporating the proposed feeding method, was designed and installed on a rear windshield of a commercial sedan. The antenna using the proposed feeding method shows a similar reflection coefficient, and it shows 2 dB increased average azimuth radiation gain compared to that using a conventional sash ground method. These results demonstrate that the proposed feeding method can be applicable for integrating multiple antennas in a rear windshield.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.736-737
• /
• 2011

This article proposes a POD system framework which creates templates by using the Web service environment with good accessibility, provides them so that users can easily edit them, and uses COM ports following Web standard capable of real-time printing with the same quality as edited files. The characteristic of framework proposed in this article is that it creates programs which users with basic skill in Internet use can learn and use relatively easily when compared with existing specialized editing programs and which allows users to print real-time such files as personally created by them in the same quality as on the screen, and thereby enhances accessibility there of.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.666-671
• /
• 2014

Using positive temperature coefficient (PTC) heater as supplementary heating for diesel engine vehicles with low heat source is a good method to enhance the heating performance during cold start. In this study, the PTC elements were made by using screen printing process for forming ohmic contact layer, and prototype of PTC heater was designed and made for a diesel engine vehicle. In process of designing the PTC heater, the thermal flow analysis of PTC element modules was conducted for verifying the effect of the shapes of contact surface between each of the components (cooling fin, insulator, ceramic element). We also investigated the performance characteristic (heating capacity, energy efficiency, pressure drop) of the PTC heater through the experiments. Therefore, the experimental results indicated that prototype of PTC heater had satisfactory performance. This study will be basis for improving the manufacturing process and increasing the performance of the PTC element and heater.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.4
• /
• pp.351-363
• /
• 2004

Recent commencement of digital broadcasting has enabled various TV programs through hundreds of channels. As a result, it becomes a time-consuming job for the TV audience to look up newspaper or TV magazines for the schedule of a specific TV program. To relieve this problem, digital broadcasting usually provides an EPG(Electronic Program Guide) for the audience. Currently. most EPG services are focusing on the visual delivery of information through a web site, digital TV or mobile devices. However, this approach could cause a serious restriction to some users including drivers or visually handicapped persons, who can't input keywords for the search. In order to solve this problem, in this paper, we propose a VoiceXML-based EPG retrieval system that enables even such special users to browse EPG. conveniently using a mobile phone. We implemented a prototype system and proved its effectiveness through experiments.

• The Journal of the Korea Contents Association
• /
• v.6 no.6
• /
• pp.1-8
• /
• 2006

This paper presents an intelligent pattern matching method that can be used to acquire the reliable calibration data for automatic PCB pattern inspection. The inaccurate calibration data is often acquired by geometric pattern variations and selecting an inappropriate model manual. It makes low the confidence of inspection and also the inspection processing time has been delayed. In this paper, the geometric features of PCB patterns are utilized to calculate the accurate calibration data. An appropriate model is selected automatically based on the geometric features, and then the calibration data to be invariant to the geometric variations(translation, rotation, scaling) is calculated. The method can save the inspection time unnecessary by eliminating the need for manual model selection. As the result, it makes a fast, accurate and reliable inspection of PCB patterns.

• Review of Culture and Economy
• /
• v.21 no.3
• /
• pp.89-124
• /
• 2018

Although design industry belongs to one of the creative industries and contributes significantly to urban cultural economy based on its cluster formation, researches on design industry are rarely made explicit from the perspective of creative industry cluster. After reviewing the life cycle of design industry clusters in Euljiro and Hongdae Area in Seoul, this study compares these two clusters with respect of diverse dimensions of creative industry cluster such as agglomeration economy, spin-off activities and institutional environments. Research methodology includes the analysis of ?Seoul Business Statistics? and the in-depth interviews with 14 professional designers. The result shows that design industry cluster in Euljiro is close to the traditional industry cluster mainly dependent on printing industry with very limited impact on urban economy, while Hongdae Area develops creative industry cluster by virtue of university spin-offs, art markets, hybrid cultural consumption spaces and the active participation of designers contributing to urban economy in diverse ways. This comparative analysis highlights the importance of various environmental components to encourage creative activities in developing the creative industry cluster.